509 research outputs found
Electromagnetic Imaging for Inhomogeneous Dielectric Cylinder Buried in a Slab Medium
[[abstract]]The electromagnetic imaging of inhomogeneous dielectric cylinders buried in a slab medium is investigated. Dielectric cylinders of unknown permittivities are buried in second space and scattered a group of unrelated waves incident from first space where the scattered field is recorded. By proper arrangement of the various unrelated incident field, the difficulties of ill-posedness and nonlinearity are circumvented, and the permittivity distribution can be reconstructed through simple matrix operations. The algorithm is based on the moment method and the unrelated illumination method. Numerical results are given to demonstrate the capability of the inverse algorithm. They also show that the permittivity distribution of the cylinders can be successfully reconstructed even when the permittivity is fairly large. Good reconstructed results are obtained even in the presence of additive Gaussian noise in measured data. In addition, the effect of noise on the reconstruction result is also investigated.[[notice]]補正完畢[[incitationindex]]EI[[booktype]]紙
Image reconstruction of inhomogeneous biaxial dielectric cylinders buried in a slab medium
100學年度研究獎補助論文[[abstract]]The image reconstruction of inhomogeneous biaxial dielectric cylinders buried in a slab medium is investigated. A biaxial dielectric cylinder of unknown permittivities buried in a slab scatters a group of unrelated incident waves from outside. The scattered field is recorded outside the slab. By proper arrangement of the various unrelated incident fields, the difficulties of ill-posedness and nonlinearity are circumvented, and the permittivity distribution can be reconstructed through simple matrix operations. The algorithm is based on the moment method and the unrelated illumination method. Numerical results are given to demonstrate the capability of the inverse algorithm. Good reconstructed results are obtained even in the presence of additive Gaussian random noise in measured data. In addition, the effect of noise on the reconstruction result is also investigated.[[incitationindex]]SCI[[incitationindex]]EI[[booktype]]紙
Time Domain Image Reconstruction for a Buried 2D Homogeneous Dielectric Cylinder Using NU-SSGA
[[abstract]]This article presents an image reconstruction approach for a buried homogeneous cylinder with arbitrary cross-section in half space. The computational method combines the finite difference time domain (FDTD) method and non-uniform steady state genetic algorithm (NU-SSGA) to determine the shape and location of the subsurface scatterer with arbitrary shape. The FDTD-subgirdding technique is implemented for modeling the shape of the cylinder more closely. The inverse problem is reformulated into an optimization problem and the global searching scheme NU-SSGA with closed cubic-spline is then employed to search the parameter space. A set of representative numerical results is presented for demonstrating that the proposed approach is able to efficiently reconstruct the electromagnetic properties of homogeneous dielectric scatterer even when the initial guess is far from the exact one. In addition, the effects of Gaussian noises on imaging reconstruction are also investigated.[[incitationindex]]SCI[[incitationindex]]EI[[booktype]]紙
Comparative Study of Some Population-based Optimization Algorithms on Inverse Scattering of a Two-Dimensional Perfectly Conducting Cylinder in Slab Medium
[[abstract]]The application of four techniques for the shape reconstruction of a 2-D metallic cylinder buried in dielectric slab medium by measured the cattered fields outside is studied in the paper. The finite-difference time-domain (FDTD) technique is employed for electromagnetic analyses for both the forward and inverse scattering problems, while the shape reconstruction problem is transformed into optimization one during the course of inverse scattering. Then, four techniques including asynchronous particle swarm optimization (APSO), PSO, dynamic differential evolution (DDE) and self-adaptive DDE (SADDE) are applied to reconstruct the location and shape of the 2-Dmetallic cylinder for comparative purposes. The statistical performances of these algorithms are compared. The results show that SADDE outperforms PSO, APSO and DDE in terms of the ability of exploring the optima. However, these results are considered to be indicative and do not generally apply to all optimization problems in electromagnetics.[[incitationindex]]SCI[[incitationindex]]EI[[booktype]]紙本[[booktype]]電子
Enhanced acoustic mode coupling resulting from an internal solitary wave approaching the shelfbreak in the South China Sea
Author Posting. © Acoustical Society of America, 2013. This article is posted here by permission of Acoustical Society of America for personal use, not for redistribution. The definitive version was published in Journal of the Acoustical Society of America 133 (2013): 1306-1319, doi:10.1121/1.4789358.Internal waves and bathymetric variation create time- and space-dependent alterations in the ocean acoustic waveguide, and cause subsequent coupling of acoustic energy between propagating normal modes. In this paper, the criterion for adiabatic invariance is extended to the case of an internal solitary wave (ISW) encountering a sloping bathymetry (i.e., continental shelfbreak). Predictions based on the extended criterion for adiabatic invariance are compared to experimental observations from the Asian Seas International Acoustics Experiment. Using a mode 1 starter field, results demonstrate time-dependent coupling of mode 1 energy to higher adjacent modes, followed by abrupt coupling of mode 5–7 energy to nonadjacent modes 8–20, produces enhanced mode coupling and higher received levels downrange of the oceanographic and bathymetric features. Numerical simulations demonstrate that increasing ISW amplitude and seafloor slope enhance the coupling of energy to adjacent and nonadjacent modes. This enhanced coupling is the direct result of the simultaneous influence of the ISW and its proximity to the shelfbreak, and, compared to the individual effect of the ISW or shelfbreak, has the capacity to scatter 2–4 times the amount of acoustic energy from below the thermocline into the upper water column beyond the shelfbreak in realistic environments.The ASIAEX and NLIWI experiments were supported
jointly by the National Science Council of Taiwan and the
U.S. Office of Naval Research
Pseudomonas aeruginosa sepsis with ecthyma gangrenosum and pseudomembranous pharyngolaryngitis in a 5-month-old boy
Pseudomonas aeruginosa infection that induced pseudomembranous laryngopharyngitis and ecthyma gangrenosum simultaneously in a healthy infant is rare. We reported on a previously healthy 5-month-old boy with initial presentation of fever and diarrhea followed by stridor and progressive respiratory distress. P. aeruginosa sepsis was suspected because ecthyma gangrenosum over the right leg was found at the emergency department, and the diagnosis was confirmed by the blood culture. Fiberscope revealed bacterial pharyngolaryngitis without involvement of the trachea. Because of early recognition and adequate treatment, including antimicrobial therapy, noninvasive ventilation, incision, and drainage, he recovered completely without any complications
Recommended from our members
Different WDR36 Mutation Pattern in Chinese Patients with Primary Open-angle Glaucoma
Purpose: To determine the distribution of WD repeat domain 36 (WDR36) sequence variants in Chinese patients with primary open-angle glaucoma (POAG). Methods: One hundred and thirty-five unrelated POAG patients (82 high tension glaucoma [HTG], 42 normal tension glaucoma [NTG], and 11 juvenile-onset POAG [JOAG] patients) and 77 unrelated controls were recruited. All 23 coding exons and splicing junctions of WDR36 were sequenced using BigDye® Terminator v3.1 cycle sequencing kit. Single nucleotide polymorphism (SNP) and haplotype associations were analyzed using PLINK (version 1.04). Results: Nineteen sequence alterations were identified, and eight of them were novel including two novel nonsynonymous SNPs (L240V and I713V). Except the common I264V polymorphism, no other previously reported disease-causing or disease-susceptibility mutations were found. The novel I713V mutation was observed in three (3.7%) patients with HTG. One intronic SNP, IVS5+30C>T (rs10038177), showed significantly higher frequency of minor allele T in HTG patients (16.5%) than in controls (1.3%; Odds ratio [OR]=15.0, p=7.9×10−7, Bonferroni corrected p=1.5×10−5). Haplotype GTA, which is composed of rs13153937, rs10038177, and rs11241095, was significantly associated with HTG (OR=22.5, p=0.002, Bonferroni corrected p=0.013). Neither the individual SNPs nor haplotypes of WDR36 were associated with NTG or JOAG (Bonferroni corrected p>0.05). Conclusions: Findings in this study suggest WDR36 to be associated with sporadic HTG but not with NTG or JOAG. Our results also suggest a different mutation pattern of WDR36 in the Chinese population from other ethnic populations
An investigation of siloxane cross-linked hydroxyapatite–gelatin/copolymer composites for potential orthopedic applications
Causes of bone deficiency are numerous, but biomimetic alloplastic grafts provide an alternative to repair tissue naturally. Previously, a hydroxyapatite-gelatin modified siloxane (HAp-Gemosil) composite was prepared by cross-linking (N, N′-bis[(3-trimethoxysilyl)propyl]ethylene diamine (enTMOS) around the HAp-Gel nanocomposite particles, to mimic the natural composition and properties of bone. However, the tensile strength remained too low for many orthopedic applications. It was hypothesized that incorporating a polymer chain into the composite could help improve long range interaction. Furthermore, designing this polymer to interact with the enTMOS siloxane cross-linked matrix would provide improved adhesion between the polymer and the ceramic composite, and improve mechanical properties. To this end, copolymers of L-Lactide (LLA), and a novel alkyne derivatized trimethylene carbonate, propargyl carbonate (PC), were synthesized. Incorporation of PC during copolymerization affects properties of copolymers such as molecular weight, Tg, and % PC incorporation. More importantly, PC monomers bear a synthetic handle, allowing copolymers to undergo post-polymerization functionalization with graft monomers to specifically tailor the properties of the final composite. For our investigation, P(LLA-co-PC) copolymers were functionalized by an azido-silane (AS) via copper catalyzed azide-alkyne cycloaddition (CuAAC) through terminal alkyne on PC monomers. The new functionalized polymer, P(LLA-co-PC)(AS) was blended with HAp-Gemosil, with the azido-silane linking the copolymer to the silsesquioxane matrix within the final composite
- …