Kinetic Monte Carlo Simulations of Crystal Growth in Ferroelectric Alloys

The growth rates and chemical ordering of ferroelectric alloys are studied with kinetic Monte Carlo (KMC) simulations using an electrostatic model with long-range Coulomb interactions, as a function of temperature, chemical composition, and substrate orientation. Crystal growth is characterized by thermodynamic processes involving adsorption and evaporation, with solid-on-solid restrictions and excluding diffusion. A KMC algorithm is formulated to simulate this model efficiently in the presence of long-range interactions. Simulations were carried out on Ba(Mg_{1/3}Nb_{2/3})O_3 (BMN) type materials. Compared to the simple rocksalt ordered structures, ordered BMN grows only at very low temperatures and only under finely tuned conditions. For materials with tetravalent compositions, such as (1-x)Ba(Mg_{1/3}Nb_{2/3})O_3 + xBaZrO_3 (BMN-BZ), the model does not incorporate tetravalent ions at low-temperature, exhibiting a phase-separated ground state instead. At higher temperatures, tetravalent ions can be incorporated, but the resulting crystals show no chemical ordering in the absence of diffusive mechanisms.Comment: 13 pages, 16 postscript figures, submitted to Physics Review B Journa

Active RIS Versus Passive RIS: Which Is Superior with the Same Power Budget?

This letter theoretically compares the active reconfigurable intelligent surface (RIS)-aided system with the passive RIS-aided system. For a fair comparison, we consider that these two systems have the same overall power budget that can be used at both the base station (BS) and the RIS. For active RIS, we first derive the optimal power splitting between the BS’s transmit signal power and RIS’s output signal power. We also analyze the impact of various system parameters on the optimal power splitting ratio. Then, we theoretically and numerically compare the performance between the active RIS and the passive RIS, which demonstrates that the active RIS would be superior if the power budget is not very small and the number of RIS elements is not very large

A Hybrid Fuzzy Cognitive Map/Support Vector Machine Approach for EEG-Based Emotion Classification Using Compressed Sensing

© 2018, Taiwan Fuzzy Systems Association and Springer-Verlag GmbH Germany, part of Springer Nature. Due to the high dimensional, non-stationary and non-linear properties of electroencephalogram (EEG), a significant portion of research on EEG analysis remains unknown. In this paper, a novel approach to EEG-based human emotion study is presented using Big Data methods with a hybrid classifier. An EEG dataset is firstly compressed using compressed sensing, then, wavelet transform features are extracted, and a hybrid Support Vector Machine (SVM) and Fuzzy Cognitive Map classifier is designed. The compressed data is only one-fourth of the original size, and the hybrid classifier has the average accuracy by 73.32%. Comparing to a single SVM classifier, the average accuracy is improved by 3.23%. These outcomes show that psychological signal can be compressed without the sparsity identity. The stable and high accuracy classification system demonstrates that EEG signal can detect human emotion, and the findings further prove the existence of the inter-relationship between various regions of the brain

Information-centric networking for machine-to-machine data delivery: A case study in smart grid applications

Largely motivated by the proliferation of content-centric applications in the Internet, information-centric networking has attracted the attention of the research community. By tailoring network operations around named information objects instead of end hosts, ICN yields a series of desirable features such as the spatiotemporal decoupling of communicating entities and the support of in-network caching. In this article, we advocate the introduction of such ICN features in a new, rapidly transforming communication domain: the smart grid. With the rapid introduction of multiple new actors, such as distributed (renewable) energy resources and electric vehicles, smart grids present a new networking landscape where a diverse set of multi-party machine-to-machine applications are required to enhance the observability of the power grid, often in real time and on top of a diverse set of communication infrastructures. Presenting a generic architectural framework, we show how ICN can address the emerging smart grid communication challenges. Based on real power grid topologies from a power distribution network in the Netherlands, we further employ simulations to both demonstrate the feasibility of an ICN solution for the support of real-time smart grid applications and further quantify the performance benefits brought by ICN against the current host-centric paradigm. Specifically, we show how ICN can support real-time state estimation in the medium voltage power grid, where high volumes of synchrophasor measurement data from distributed vantage points must be delivered within a very stringent end-to-end delay constraint, while swiftly overcoming potential power grid component failures. © 1986-2012 IEEE

DETC2005-85596 NONLINEAR CONTROL OF HYBRID ELECTROSTRICTIVE/PIEZOELECTRIC POLYMERIC STRUCTURES: THEORY AND EXPERIMENT

ABSTRACT Electromechanical response of electrostrictive materials behaves quadratically, while that of piezoelectric material behaves linearly. This study is to evaluate quadratic control response of electrostrictive actuators with reference to linear signal generation of piezoelectric sensors. A hybrid beam structure coupled with an electrostrictive RTV 270 actuator layer and a polyvinylidene-fluoride sensor layer is fabricated and its control response evaluated. Mathematical model is established first, followed by finite-difference discretization resulting in a set of finite difference equations used in numerical simulation of controlled and uncontrolled responses. The physical model connected to a bang-bang controller, a high-voltage amplifier, a data acquisition system is setup in laboratory. Due to the quadratic behavior of the electrostrictive actuator, the bang-bang controller activates the electrostrictive actuator only in the upward motion of the beam, according to the signals generated from the piezoelectric sensor. Vibration control characteristic (i.e., damping ratio estimation) of the beam subjected to various control conditions are evaluated. Experimental data are compared favorably with simulation results

Detention Properties of Subsurface Stormwater Modules Under Tropical Climate

Subsurface stormwater module is one of the components of a sustainable drainage system. However, the performance of subsurface stormwater module as on-site detention under tropical climate like Malaysia has not been extensively studied in the literature. The current study involves on-site installation of pilot scale subsurface stormwater modules exposed to tropical climate to simulate real conditions to evaluate the detention performance. Rainfall together with the changes in water level and volume of water detained in the installation were observed for six months between April 2021 to October 2021. The subsurface stormwater module used in the current study has a porosity of 94%. It was found that the subsurface stormwater module setup was able to detain between 35.2% to 95.6% of the rainfall volume generated from total rainfall between 11.1 mm to 56.8 mm. The findings can be used as design consideration for using subsurface stormwater module under tropical climate

Solving Linear Coupled Fractional Differential Equations by Direct Operational Method and Some Applications

A new direct operational inversion method is introduced for solving coupled linear systems of ordinary fractional differential equations. The solutions so-obtained can be expressed explicitly in terms of multivariate Mittag-Leffler functions. In the case where the multiorders are multiples of a common real positive number, the solutions can be reduced to linear combinations of Mittag-Leffler functions of a single variable. The solutions can be shown to be asymptotically oscillatory under certain conditions. This technique is illustrated in detail by two concrete examples, namely, the coupled harmonic oscillator and the fractional Wien bridge circuit. Stability conditions and simulations of the corresponding solutions are given