Tripolyphosphate-crosslinked chitosan/gelatin biocomposite ink for 3D printing of uniaxial scaffolds.

Chitosan is a natural polymer widely investigated and used due to its antibacterial activity, mucoadhesive, analgesic, and hemostatic properties. Its biocompatibility makes chitosan a favorable candidate for different applications in tissue engineering (TE), such as skin, bone, and cartilage tissue regeneration. Despite promising results obtained with chitosan 3D scaffolds, significant challenges persist in fabricating hydrogel structures with ordered architectures and biological properties to mimic native tissues. In this work, chitosan has been investigated aiming at designing and fabricating uniaxial scaffolds which can be proposed for the regeneration of anisotropic tissues (i.e., skin, skeletal muscle, myocardium) by 3D printing technology. Chitosan was blended with gelatin to form a polyelectrolyte complex in two different ratios, to improve printability and shape retention. After the optimization of the printing process parameters, different crosslinking conditions were investigated, and the 3D printed samples were characterized. Tripolyphosphate (TPP) was used as crosslinker for chitosan-based scaffolds. For the optimization of the printing temperature, the sol-gel temperature of the chitosan-gelatin blend was determined by rheological measurements and extrusion temperature was set to 20°C (i.e., below sol-gel temperature). The shape fidelity and surface morphology of the 3D printed scaffolds after crosslinking was dependent on crosslinking conditions. Interestingly, mechanical properties of the scaffolds were also significantly affected by the crosslinking conditions, nonetheless the stability of the scaffolds was strongly determined by the content of gelatin in the blend. Lastly, in vitro cytocompatibility test was performed to evaluate the interactions between L929 cells and the 3D printed samples. 2% w/v chitosan and 4% w/v gelatin hydrogel scaffolds crosslinked with 10% TPP, 30 min at 4°C following 30 min at 37°C have shown cytocompatible and stable characteristics, compared to all other tested conditions, showing suitable properties for the regeneration of anisotropic tissues

Enhancing X-ray Attenuation of 3D Printed Gelatin Methacrylate (GelMA) Hydrogels Utilizing Gold Nanoparticles for Bone Tissue Engineering Applications

Contains fulltext : 201780.pdf (publisher's version ) (Open Access

Gelatin methacrylate scaffold for bone tissue engineering: The influence of polymer concentration

Item does not contain fulltextGelatin methacrylate (GelMA) is an inexpensive, photocrosslinkable, cell-responsive hydrogel which has drawn attention for a wide range of tissue engineering applications. The potential of GelMA scaffolds was demonstrated to be tunable for different tissue engineering (TE) applications through modifying the polymer concentration, methacrylation degree, or UV light intensity. Despite the promising results of GelMA hydrogels in tissue engineering, the influence of polymer concentration for bone tissue engineering (BTE) scaffolds was not established yet. Thus, in this study, we have demonstrated the effect of polymer concentration in GelMA scaffolds on osteogenic differentiation. We prepared GelMA scaffolds with 5 and 10% polymer concentrations and characterized the scaffolds in terms of porosity, pore size, swelling characteristics, and mechanical properties. Subsequent to the scaffolds characterization, the scaffolds were seeded with bone marrow derived rat mesenchymal stem cells and cultured in osteogenic media to evaluate the possible osteogenic differentiation effect exerted by the polymer concentration. After 7, 14, 21, and 28 days, DNA content, calcium deposition, and alkaline phosphatase (ALP) activity of scaffolds were evaluated quantitatively by colorimetric bioassays. Furthermore, the distribution of the calcium deposition within the scaffolds was attained qualitatively and quantitatively by microcomputer tomography (microCT). Our data suggest that GelMA hydrogels prepared with 5% polymer concentration has promoted homogeneous extracellular matrix calcification and it is a great candidate for BTE applications. (c) 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 201-209, 2018

In vitro and in vivo assessment of a 3D printable gelatin methacrylate hydrogel for bone regeneration applications

Bone tissue engineering (BTE) has made significant progress in developing and assessing different types of bio-substitutes. However, scaffolds production through standardized methods, as required for good manufacturing process (GMP), and post-transplant in vivo monitoring still limit their translation into the clinic. 3D printed 5% GelMA scaffolds have been prepared through an optimized and reproducible process in this work. Mesenchymal stem cells (MSC) were encapsulated in the 3D printable GelMA ink, and their biological properties were assessed in vitro to evaluate their potential for cell delivery application. Moreover, in vivo implantation of the pristine 3D printed GelMA has been performed in a rat condyle defect model. Whereas optimal tissue integration was observed via histology, no signs of fibrotic encapsulation or inhibited bone formation were attained. A multimodal imaging workflow based on computed tomography (CT) and magnetic resonance imaging (MRI) allowed the simultaneous monitoring of both new bone formation and scaffold degradation. These outcomes point out the direction to undertake in developing 3D printed-based hydrogels for BTE that can allow a faster transition into clinical use

3D Tissue Modelling of Skeletal Muscle Tissue

Skeletal muscle tissue exhibits endogenous ability to regenerate. However, the self-repair mechanism is restricted only to small damages. The increasing number of extensive injuries of skeletal muscles due to various accidents, more active life-style or cancer resection, combined with the shortcomings of the conventional treatment procedures, creates demand for new, more advanced solutions. Muscle tissue engineering (TE) appears as a promising strategy for fabrication of tissue substitutes from biomaterials, cells and bioactive factors, alone or combined. In this chapter, we present current state of the art of regeneration and engineering of skeletal muscle tissue. The chapter begins with a brief introduction to structure and functions of skeletal muscle tissue, followed by discussion of cells with potential for repair of muscle injuries and dysfunctions. Next, we provide an overview of natural and synthetic biomaterials used in skeletal muscle TE, as well as description of techniques used to process the biomaterials into scaffolds. We also highlight the importance of mechanical and electrical stimulation during in vitro culture and their effect on cell differentiation and maturation. Last but not least, the latest results of in vivo studies are reported. The chapter is concluded with a short summary and outlook on future developments

4D printing in biomedical applications: emerging trends and technologies

Nature's material systems during evolution have developed the ability to respond and adapt to environmental stimuli through the generation of complex structures capable of varying their functions across direction, distances and time. 3D printing technologies can recapitulate structural motifs present in natural materials, and efforts are currently being made on the technological side to improve printing resolution, shape fidelity, and printing speed. However, an intrinsic limitation of this technology is that printed objects are static and thus inadequate to dynamically reshape when subjected to external stimuli. In recent years, this issue has been addressed with the design and precise deployment of smart materials that can undergo a programmed morphing in response to a stimulus. The term 4D printing was coined to indicate the combined use of additive manufacturing, smart materials, and careful design of appropriate geometries. In this review, we report the recent progress in the design and development of smart materials that are actuated by different stimuli and their exploitation within additive manufacturing to produce biomimetic structures with important repercussions in different but interrelated biomedical areas

Tackling Current Biomedical Challenges With Frontier Biofabrication and Organ-On-A-Chip Technologies

In the last decades, biomedical research has significantly boomed in the academia and industrial sectors, and it is expected to continue to grow at a rapid pace in the future. An in-depth analysis of such growth is not trivial, given the intrinsic multidisciplinary nature of biomedical research. Nevertheless, technological advances are among the main factors which have enabled such progress. In this review, we discuss the contribution of two state-of-the-art technologies-namely biofabrication and organ-on-a-chip-in a selection of biomedical research areas. We start by providing an overview of these technologies and their capacities in fabricating advanced in vitro tissue/organ models. We then analyze their impact on addressing a range of current biomedical challenges. Ultimately, we speculate about their future developments by integrating these technologies with other cutting-edge research fields such as artificial intelligence and big data analysis

3D

© 2021 Wiley Periodicals LLC.Fabrication of scaffolds using polymers and then cell seeding is a routine protocol of tissue engineering applications. Synthetic polymers have adequate mechanical properties to substitute for some bone tissue, but they are generally hydrophobic and have no specific cell recognition sites, which leads to poor cell affinity and adhesion. Some natural polymers, have high cell affinity but are mechanically weak and do not have the strength required as a bone supporting material. In the present study, 3D printed hybrid scaffolds were fabricated using PCL and GelMA carrying dental pulp stem cells (DPSCs), which is printed in the gaps between the PCL struts. This cell loaded GelMA was shown to support osteoinductivity, while the PCL provided mechanical strength needed to mimic the bone tissue. 3D printed PCL/GelMA and GelMA scaffolds were highly stable during 21 days of incubation in PBS. The compressive moduli of the hybrid scaffolds were in the range of the compressive moduli of trabecular bone. DPSCs were homogeneously distributed throughout the entire hydrogel component and exhibited high cell viability in both scaffolds during 21 days of incubation. Upon osteogenic differentiation DPSCs expressed two key matrix proteins, osteopontin and osteocalcin. Alizarin red staining showed mineralized nodules, which demonstrates osteogenic differentiation of DPSCs within GelMA. This construct yielded a very high cell viability, osteogenic differentiation and mineralization comparable to cell culture without compromising mechanical strength suitable for bone tissue engineering applications. Thus, 3D printed, cell loaded PCL/GelMA hybrid scaffolds have a great potential for use in bone tissue engineering applications