Numerical Optimization of Hybrid Dielectric/HTS Resonator for Surface Impedance Evaluation of HTS Films

This work describes an alternative to the traditional dielectric resonator topology used for measuring surface impedance in high temperature superconducting (HTS) films. A gap is introduced above the dielectric so that only the lower film is in direct contact with it. This arrangement has been used extensively for mechanical tuning of dielectric resonators and, when used for surface impedance measurement, it can be designed to make the losses in the upper film small relative to the overall resonator losses. Then, measured results are mostly due to one of the films and not the average of two. The specifics of a resonator design for measuring 2-inch wafers are presented. An analysis and optimization of the resonator is done using a numerically efficient mode-matching algorithmPeer ReviewedPostprint (published version

Mechanisms for conduction via low-frequency noise measurements of High-Tc Thin-film microbridges

We have investigated possible mechanisms for conduction in high-T/sub c/ thin-film microbridges biased into the voltage state via the low-frequency noise properties. Measurements on thinned YBCO microbridges indicate that the voltage noise power spectral density S/sub V/(f) is proportional to the DC voltage.Peer Reviewe

Synthesis, biological profiling and mechanistic studies of 4-aminoquinoline-based heterodimeric compounds with dual trypanocidal–antiplasmodial activity.

YesDual submicromolar trypanocidal–antiplasmodial compounds have been identified by screening and chemical synthesis of 4-aminoquinoline-based heterodimeric compounds of three different structural classes. In Trypanosoma brucei, inhibition of the enzyme trypanothione reductase seems to be involved in the potent trypanocidal activity of these heterodimers, although it is probably not the main biological target. Regarding antiplasmodial activity, the heterodimers seem to share the mode of action of the antimalarial drug chloroquine, which involves inhibition of the haem detoxification process. Interestingly, all of these heterodimers display good brain permeabilities, thereby being potentially useful for late stage human African trypanosomiasis. Future optimization of these compounds should focus mainly on decreasing cytotoxicity and acetylcholinesterase inhibitory activity

Magnetic field sensitivity of variable thickness microbridges in tbcco, bscco and ybco.

We describe results of a study comparing the magnetic field sensitivities of variable thickness bridge (VTB) arrays fabricated in TBCCO, BSCCO, and YBCO thin films. Identical structures were patterned in a variety of films, and the bridges were thinned by four different methods. Analysis of the data yields experimental evidence as to the suitability of these types of films for devices such as the superconducting flux flow transistor (SFFT) which is based on this geometry. The volt-ampere characteristics of the arrays were measured in low uniform magnetic fields (⩽130 G) and in nonuniform fields (⩽5 G) produced by a nearby control line. For these films in this geometry, no measurable effect of the control line magnetic field was observed. Large values of transresistance and current gain could only be attained through a thermal mechanism when the control line was driven normal. Upper bounds for (magnetically generated) transresistance (⩽5 mΩ) and current gains (⩽0.005) have been inferred from the uniform field data assuming a standard best-case device geometry. All volt-ampere curves followed closely a power law relationship (V~I n), with exponent n ~1.2-10. We suggest materials considerations that may yield improved device performancePeer Reviewe

Evaluation of Fourier Transform Infrared Spectroscopy as a First-Line Typing Tool for the Identification of Extended-Spectrum β-Lactamase-Producing Klebsiella pneumoniae Outbreaks in the Hospital Setting

Early detection of pathogen cross-transmission events and environmental reservoirs is needed to control derived nosocomial outbreaks. Whole-genome sequencing (WGS) is considered the gold standard for outbreak confirmation, but, in most cases, it is time-consuming and has elevated costs. Consequently, the timely incorporation of WGS results to conventional epidemiology (CE) investigations for rapid outbreak detection is scarce. Fourier transform infrared spectroscopy (FTIR) is a rapid technique that establishes similarity among bacteria based on the comparison of infrared light absorption patterns of bacterial polysaccharides and has been used as a typing tool in recent studies. The aim of the present study was to evaluate the performance of the FTIR as a first-line typing tool for the identification of extended-spectrum β-lactamase-producing Klebsiella pneumoniae (ESBL-Kp) outbreaks in the hospital setting in comparison with CE investigations using WGS as the gold standard method. Sixty-three isolates of ESBL-Kp collected from 2018 to 2021 and classified according to CE were typed by both FTIR and WGS. Concordance was measured using the Adjusted Rand index (AR) and the Adjusted Wallace coefficient (AW) for both CE and FTIR clustering considering WGS as the reference method. Both AR and AW were significantly higher for FTIR clustering than CE clustering (0.475 vs. 0.134, p = 0.01, and 0.521 vs. 0.134, p = 0.009, respectively). Accordingly, FTIR inferred more true clustering relationships than CE (38/42 vs. 24/42, p = 0.001). However, a similar proportion of genomic singletons was detected by both FTIR and CE (13/21 vs. 12/21, p = 1). This study demonstrates the utility of the FTIR method as a quick, low-cost, first-line tool for the detection of ESBL-Kp outbreaks, while WGS analyses are being performed for outbreak confirmation and isolate characterization. Thus, clinical microbiology laboratories would benefit from integrating the FTIR method into CE investigations for infection control measures in the hospital setting.We thank the Germans Trias i Pujol Research Institute (IGTP) Translational Genomics Core Facility and staff for their contribution to this publication. We also thank CERCA Programme/Government of Catalonia for their support to the IGTP.S

Evaluation of Fourier Transform Infrared Spectroscopy as a First-Line Typing Tool for the Identification of Extended-Spectrum β-Lactamase-Producing Klebsiella pneumoniae Outbreaks in the Hospital Setting

Early detection of pathogen cross-transmission events and environmental reservoirs is needed to control derived nosocomial outbreaks. Whole-genome sequencing (WGS) is considered the gold standard for outbreak confirmation, but, in most cases, it is time-consuming and has elevated costs. Consequently, the timely incorporation of WGS results to conventional epidemiology (CE) investigations for rapid outbreak detection is scarce. Fourier transform infrared spectroscopy (FTIR) is a rapid technique that establishes similarity among bacteria based on the comparison of infrared light absorption patterns of bacterial polysaccharides and has been used as a typing tool in recent studies. The aim of the present study was to evaluate the performance of the FTIR as a first-line typing tool for the identification of extended-spectrum β-lactamase-producing Klebsiella pneumoniae (ESBL-Kp) outbreaks in the hospital setting in comparison with CE investigations using WGS as the gold standard method. Sixty-three isolates of ESBL-Kp collected from 2018 to 2021 and classified according to CE were typed by both FTIR and WGS. Concordance was measured using the Adjusted Rand index (AR) and the Adjusted Wallace coefficient (AW) for both CE and FTIR clustering considering WGS as the reference method. Both AR and AW were significantly higher for FTIR clustering than CE clustering (0.475 vs. 0.134, p = 0.01, and 0.521 vs. 0.134, p = 0.009, respectively). Accordingly, FTIR inferred more true clustering relationships than CE (38/42 vs. 24/42, p = 0.001). However, a similar proportion of genomic singletons was detected by both FTIR and CE (13/21 vs. 12/21, p = 1). This study demonstrates the utility of the FTIR method as a quick, low-cost, first-line tool for the detection of ESBL-Kp outbreaks, while WGS analyses are being performed for outbreak confirmation and isolate characterization. Thus, clinical microbiology laboratories would benefit from integrating the FTIR method into CE investigations for infection control measures in the hospital setting

Six-year follow-up of slaughterhouse surveillance (2008-2013): the Catalan Slaughterhouse Support Network (SESC)

Meat inspection has the ultimate objective of declaring the meat and offal obtained from carcasses of slaughtered animals fit or unfit for human consumption. This safeguards the health of consumers by ensuring that the food coming from these establishments poses no risk to public health. Concomitantly, it contributes to animal disease surveillance. The Catalan Public Health Protection Agency (Generalitat de Catalunya) identified the need to provide its meat inspectors with a support structure to improve diagnostic capacity: the Slaughterhouse Support Network (SESC). The main goal of the SESC was to offer continuing education to meat inspectors to improve the diagnostic capacity for lesions observed in slaughterhouses. With this aim, a web-based application was designed that allowed meat inspectors to submit their inquiries, images of the lesions, and samples for laboratory analysis. This commentary reviews the cases from the first 6 years of SESC operation (2008–2013). The program not only provides continuing education to inspectors but also contributes to the collection of useful information on animal health and welfare. Therefore, SESC complements animal disease surveillance programs, such as those for tuberculosis, bovine cysticercosis, and porcine trichinellosis, and is a powerful tool for early detection of emerging animal diseases and zoonoses

Magnetic field sensitivity of variable thickness microbridges in tbcco, bscco and ybco

We describe results of a study comparing the magnetic field sensitivities of variable thickness bridge (VTB) arrays fabricated in TBCCO, BSCCO, and YBCO thin films. Identical structures were patterned in a variety of films, and the bridges were thinned by four different methods. Analysis of the data yields experimental evidence as to the suitability of these types of films for devices such as the superconducting flux flow transistor (SFFT) which is based on this geometry. The volt-ampere characteristics of the arrays were measured in low uniform magnetic fields (⩽130 G) and in nonuniform fields (⩽5 G) produced by a nearby control line. For these films in this geometry, no measurable effect of the control line magnetic field was observed. Large values of transresistance and current gain could only be attained through a thermal mechanism when the control line was driven normal. Upper bounds for (magnetically generated) transresistance (⩽5 mO) and current gains (⩽0.005) have been inferred from the uniform field data assuming a standard best-case device geometry. All volt-ampere curves followed closely a power law relationship (V~I n), with exponent n ~1.2-10. We suggest materials considerations that may yield improved device performance [-]Peer ReviewedPostprint (published version

A Semi-Analytic Algorithm for Constructing Lower Dimensional Elliptic Tori in Planetary Systems

We adapt the Kolmogorov's normalization algorithm (which is the key element of the original proof scheme of the KAM theorem) to the construction of a suitable normal form related to an invariant elliptic torus. As a byproduct, our procedure can also provide some analytic expansions of the motions on elliptic tori. By extensively using algebraic manipulations on a computer, we explicitly apply our method to a planar four-body model not too different with respect to the real Sun--Jupiter--Saturn--Uranus system. The frequency analysis method allows us to check that our location of the initial conditions on an invariant elliptic torus is really accurate.Comment: 31 pages, 4 figure