4,711 research outputs found
Quantum annealing and the Schr\"odinger-Langevin-Kostin equation
We show, in the context of quantum combinatorial optimization, or quantum
annealing, how the nonlinear Schr\"odinger-Langevin-Kostin equation can
dynamically drive the system toward its ground state. We illustrate, moreover,
how a frictional force of Kostin type can prevent the appearance of genuinely
quantum problems such as Bloch oscillations and Anderson localization which
would hinder an exhaustive search.Comment: 5 pages, 4 figures. To appear on Physical Review
Interior layers in a reaction-diffusion equation with a discontinuous diffusion coefficient
In this paper a problem arising in the modelling of semiconductor
devices motivates the study of singularly perturbed differential equations of reaction–diffusion type with discontinuous data. The solutions of such problems typically contain interior layers where the gradient of the solution changes rapidly. Parameter–uniform methods based on piecewise–uniform Shishkin meshes are constructed and analysed for such problems. Numerical results are presented to support the theoretical results and to illustrate the benefits of using a piecewise–uniform Shishkin mesh over the use of uniform meshes in the simulation of a simple semiconductor device
The transitional millisecond pulsar IGR J18245-2452 during its 2013 outburst at X-rays and soft gamma-rays
IGR~J18245--2452/PSR J1824--2452I is one of the rare transitional accreting
millisecond X-ray pulsars, showing direct evidence of switches between states
of rotation powered radio pulsations and accretion powered X-ray pulsations,
dubbed transitional pulsars. IGR~J18245--2452 is the only transitional pulsar
so far to have shown a full accretion episode, reaching an X-ray luminosity of
~erg~s permitting its discovery with INTEGRAL in 2013. In
this paper, we report on a detailed analysis of the data collected with the
IBIS/ISGRI and the two JEM-X monitors on-board INTEGRAL at the time of the 2013
outburst. We make use of some complementary data obtained with the instruments
on-board XMM-Newton and Swift in order to perform the averaged broad-band
spectral analysis of the source in the energy range 0.4 -- 250~keV. We have
found that this spectrum is the hardest among the accreting millisecond X-ray
pulsars. We improved the ephemeris, now valid across its full outburst, and
report the detection of pulsed emission up to keV in both the ISGRI
() and Fermi/GBM () bandpass. The alignment of the
ISGRI and Fermi GBM 20 -- 60 keV pulse profiles are consistent at a $\sim25\
\mu$s level. We compared the pulse profiles obtained at soft X-rays with \xmm\
with the soft \gr-ray ones, and derived the pulsed fractions of the fundamental
and first harmonic, as well as the time lag of the fundamental harmonic, up to
s, as a function of energy. We report on a thermonuclear X-ray burst
detected with \Integ, and using the properties of the previously type-I X-ray
burst, we show that all these events are powered primarily by helium ignited at
a depth of g cm. For such a helium
burst the estimated recurrence time of d is in
agreement with the observations.Comment: 10 pages, 6 Figures, 3 Tables Astronomy and Astrophysics Journal,
accepted for publication on the 13th of April 201
Groups with many abelian subgroups
AbstractIt is known that a (generalized) soluble group whose proper subgroups are abelian is either abelian or finite, and finite minimal non-abelian groups are classified. Here we describe the structure of groups in which every subgroup of infinite index is abelian
A software engine for multi-criteria decision support in flight management - Use of dynamic cost functions - Architecture and first results
Tactical trajectory optimisation should consider the total expected cost of the flight (fuel and delay). The cost of fuel can be estimated from the expected fuel usage. The cost of delay can be approximated by simple non-linear functions but, we propose a methodology to explicitly consider its different components: passenger related (regulation 261, duty of care, missed connections and soft costs), crew and maintenance, and reactionary costs (delay and curfew). This explicit modelling captures the non-continuous aspects of the cost function, which can significantly impact the optimisation profile, e.g. ensure that missed connections are reduced.
The cost of delay, dependent on the arrival time at the gate, can be subject to uncertainties which are inherent (e.g. if a passenger will or not miss a connection) and external (e.g. taxi-in or holding times). Therefore, the optimisation framework should estimate the arrival time to the gate (not the runway) while considering these associated uncertainties.
The described architecture models the processes affecting the cost (e.g. considering probabilities of missed connections or explicit propagation of delay) and operational aspects at arrival which impact the realisation of the planned optimised trajectory (holding time, sequencing and merging distance (tromboning), and taxi-in time). The consideration of the operational uncertainties enables the estimation of the probability of achieving the flight on-time performance.
All these operational uncertainties are integrated into the cost function producing a total expected cost as a function of arrival to FL100 during the descent at the arrival airport.
The trajectory is then optimised in its vertical and speed profile finding the cost index which is expected to minimise the total costs with a simulated annealing framework.
The first results presented describe how the cost functions are generated, uncertainties considered and trajectories optimised for a flight in the LEDM-EDDF route
GPUs Based Material Point Method for Compressible Flows
Particle-In-Cell (PIC) methods such as the Material Point Method (MPM) can be cast in formulations suitable to the requirements of data locality and fine-grained parallelism of modern hardware accelerators such as Graphics Processing Units (GPUs). While continuum mechanics simulations have already shown the capabilities of MPM on a wide range of phenomena, the use of the method in compressible gas dynamics is less frequent. This contribution aims to show the potential of a GPU-based MPM parallel implementation for compressible fluid dynamics, as well as to assess the reliability of this approach in reproducing supersonic gas flows against solid obstacles. The results in the paper represent a stepping stone towards a highly parallel, Multi-GPU, MPM-base solver for M ach > 1 Fluid-Structure Interaction problems
Pericranial and scalp rotation flaps for occipitocervical hardware exposure with CSF leak in rheumatoid arthritis patient: A case report and review of the literature
Background: There are several etiologies of craniocervical junction instability (CCJI); trauma, rheumatoid arthritis (RA), infections, tumors, congenital deformity, and degenerative processes. These conditions often require surgery and craniocervical fixation. In rare cases, breakdown of such CCJI fusions (i.e., due to cerebrospinal fluid [CSF] leaks, infection, and wound necrosis) may warrant the utilization of occipital periosteal rescue flaps and scalp rotation flaps to achieve adequate closure. Case Description: A 33-year-old female with RA, cranial settling, and high cervical cord compression underwent an occipitocervical instrumented C0-C3/C4 fusion. Two months later, revision surgery was required due to articular screws pull out, CSF leakage, and infection. At the second surgery, the patient required screws removal, the application of laminar clamps, and sealing the leak with fibrin glue. However, the CSF leak persisted, and the skin edges necrosed leaving the hardware exposed. The third surgery was performed in conjunction with a plastic surgeon. It included operative debridement and covering the instrumentation with a pericranial flap. The resulting cutaneous defect was then additionally reconstructed with a scalp rotation flap. Postoperatively, the patient adequately recovered without sequelae. Conclusion: A 33-year-old female undergoing an occipitocervical fusion developed a postoperative persistent CSF leak, infection, and wound necrosis. This complication warranted the assistance of plastic surgery to attain closure. This required an occipital periosteal rescue flap with an added scalp rotation flap
An Integral Formulation for Rectangular Wires in a 3D Magneto-Quasi-Static Field
This paper proposes an integral formulation for calculating the magnetic and ohmic losses
in rectangular wires immersed in an external 3D magneto-quasi-static field. The formulation is based on
some simplifying assumptions that allow to employ a collocation method with constant elements for the
discretization, reducing the computational burden. Even if the assumptions introduce an approximation,
for the application at hand the numerical tests have shown that the accuracy is still acceptable. Moreover,
the computational time is drastically reduced with respect to other approaches based on the finite element
method
Simulation and modelling of transient electric fields in hvdc insulation systems based on polarization current measurements
Simulating and modelling electric field dynamics in the insulation of medium-and high-voltage DC electrical systems is needed to support insulation design optimization and to evaluate the impact of voltage transients on ageing mechanisms and insulation reliability. In order to perform accurate simulations, appropriate physical models must be adopted for the insulating material properties, particularly conductivity, which drives the electric field in a steady-state condition and contributes to determining the field behavior during voltage and load transients. In order to model insulation conductivity, polarization, and conduction, mechanisms must be inferred through charging and discharging current measurements, generally performed at different values of electric field and temperatures in flat specimens of the material under study. In general, both mechanisms are present, but one of them may be predominant with respect to the other depending on type of material. In this paper, we showed that models based on predominant polarization mechanisms were suitable to describe impregnated paper, but not polymers used for HV and MV DC insulation. In the latter case, indeed, trapping–detrapping and conduction phenomena were predominant compared to polarization, thus conductivity models had to be considered, in addition to or as a replacement of the polarization model, in order to carry out proper electric field simulations
- …