530 research outputs found
EarthN: A new Earth System Nitrogen Model
The amount of nitrogen in the atmosphere, oceans, crust, and mantle have
important ramifications for Earth's biologic and geologic history. Despite this
importance, the history and cycling of nitrogen in the Earth system is poorly
constrained over time. For example, various models and proxies contrastingly
support atmospheric mass stasis, net outgassing, or net ingassing over time. In
addition, the amount available to and processing of nitrogen by organisms is
intricately linked with and provides feedbacks on oxygen and nutrient cycles.
To investigate the Earth system nitrogen cycle over geologic history, we have
constructed a new nitrogen cycle model: EarthN. This model is driven by mantle
cooling, links biologic nitrogen cycling to phosphate and oxygen, and
incorporates geologic and biologic fluxes. Model output is consistent with
large (2-4x) changes in atmospheric mass over time, typically indicating
atmospheric drawdown and nitrogen sequestration into the mantle and continental
crust. Critical controls on nitrogen distribution include mantle cooling
history, weathering, and the total Bulk Silicate Earth+atmosphere nitrogen
budget. Linking the nitrogen cycle to phosphorous and oxygen levels, instead of
carbon as has been previously done, provides new and more dynamic insight into
the history of nitrogen on the planet.Comment: 36 pages, 12 figure
Algumas exigências metabólicas de Pseudomonas denitrificans
The experiment described herein was performed in order to establish a completely synthetic medium for growing P. denitrificans cells. In order to obtain in 48 hr. a growth as good as that obtained with the control cultures (with yeast extract), the medium must be formed by micronutrients, the inorganic salts No2SO4, MgSO4 and (NH4)2SO4,and by an amino acid such as sodium glutamate. The KNO3 is for course needed in order to proporcionate the nitrate, and the medium must be buffered with 1M potassium phosphate buffer, pH 6.8. Succinate serves as a substrate. The role of glutamate is under investigation.Para estudos da bioquímica da desnitrificação os desnitrificadores são cultivados em meio parcialmente sintético, com extrato de levedura ou de carne ou ainda peptona. Procurou-se então um meio de cultura completamente sintético no qual P. denitrificans pudesse desenvolver-se e fazer desnitrificação. Para tanto, células de um "strain" dessa bactéria foram crescidas durantes, 24 e 48 horas em tubos de ensaio contendo 10 ml de meio de cultura consistindo de succinato de sódio, nitrato de potássio, extrato de levedura o tampão de fosfato 1M, valôr pH 6,8. Dêsse meio (controle) 0,1 ml foi inoculado em 10 ml do meio de cultura em estudo, mantido então em condições parcialmente anaeróbicas. Após 24 horas uma alíquota foi retirada e suspensa em água destilada e a turbidês lida em espectrofotômetro Beckman, a 420 my. Os dados obtidos após longa série de ensaios permitiram concluir que a fim de se obter em 48 horas um crescimento da mesma ordem que o obtido com o meio controle, o meio de cultura sintético deve conter micronutrientes (Zn, Fe, Mn, Cu, Co, B e Mo, em EDTA), sulfato de sódio, sulfato de magnésio e ácido glutâmico, além de KNO3, succinato e tampão de fosfato
(Nota n.º 2) Fixação do dióxido de carbono e fosforilação em Nitrobacter agilis
1. Intact cells of Nitrobacter agilis fix CO2 during the oxidation of nitrite according to the same pathway found to occur in photosynthesis by higher plants. Activity of carboxidismutase - the crucial enzyme for fixation - was demonstrated in cell free extracts. 2. High energy phosphates (as ATP) are generated during the oxidation of nitrite with an apparent P/O ratio of 0.5
Monitoring of firmness evolution of peaches during storage by combining acoustic and impact methods
Firmness is a very important quality property in peach. The storage of peach affects its subsequent softening process and shelf life. The temperature and duration of storage mainly influence the firmness of stored fruit, and monitoring the evolution of fruits enables producers to manage its commercial life. The objective of the present study was to use non-destructive acoustic and impact tests to estimate firmness of peaches and to elucidate the influence of storage temperature and of time on the softening process of peach. Continuous and classification models based on variables obtained from non-destructive methods were developed. Parameters obtained from non-destructive methods were compared to destructive reference tests. The maximum force in ball compression correlated well with the maximum acceleration from impact test (r2 = 0.75), and with a band magnitude parameter from acoustic test (r2 = −0.71). Combining impact and acoustic parameters, the multiple correlation coefficient increases up to 0.91 (adjusted R2 = 0.82) in the prediction of the maximum force in ball compression. Classification models based on both non-destructive parameters and sorting peaches into two classes of firmness, showed scores of well classified higher than 90%
Addressing potential sources of variation in several non-destructive techniques for measuring firmness in apples
Measurements of firmness have traditionally been carried out according to the Magness Taylor (MT) procedure; using a texture analyser or penetrometer in reference texture tests. Non-destructive tests like the acoustic impulse response of acoustic firmness sensors (AFSs), a low-mass impact firmness sensor Sinclair International (SIQ-FT) and impact test (Lateral Impact – UPM) have also been used to measure texture and firmness. The objectives of this study were to evaluate the influence of different sources of variation in these three non-destructive tests and to evaluate their respective capabilities of discriminating between fruit maturity at two different harvest dates, turgidity before and after dehydration treatment and ripening after different storage periods. According to our results, fruit studied an unexpected AFS trend with turgidity. Contact measurements (Lateral Impact – UPM and SIQ-FT) appeared highly sensitive to changes in turgidity, but were less able to follow changes in ripening caused by storage period. Contact measurements were suitable for detecting differences between fruits from different harvest dates and showed higher correlation coefficients with reference texture tests than acoustic measurements. The Lateral Impact – UPM test proved better at separating fruits according to turgidity than the SIQ-FT instrumen
Isobutyl acetate: electronic state spectroscopy by high-resolution vacuum ultraviolet photoabsorption, He(I) photoelectron spectroscopy and ab initio calculations
The high-resolution vacuum ultraviolet photoabsorption spectrum of isobutyl acetate, C6H12O2, is presented here and was measured over the energy range 4.3–10.8 eV (290–115 nm). Valence and Rydberg transitions with their associated vibronic series have been observed in the photoabsorption spectrum and are assigned in accordance with new ab initio calculations of the vertical excitation energies and oscillator strengths. The measured photoabsorption cross sections have been used to calculate the photolysis lifetime of this ester in the Earth’s upper atmosphere (20–50 km). Calculations have also been carried out to determine the ionization energies and fine structure of the lowest ionic state of isobutyl acetate and are compared with a photoelectron spectrum (from 9.5 to 16.7 eV), recorded for the first time. Vibrational structure is observed in the first photoelectron band of this molecule
Recommended from our members
Mating disruption of stonefruit pests using sprayable formulations of biodegradable films and pheromone
Recommended from our members
Long Term Corrosion/Degradation Test Six Year Results
The Subsurface Disposal Area (SDA) of the Radioactive Waste Management Complex (RWMC) located at the Idaho National Engineering and Environmental Laboratory (INEEL) contains neutron-activated metals from non-fuel, nuclear reactor core components. The Long-Term Corrosion/Degradation (LTCD) Test is designed to obtain site-specific corrosion rates to support efforts to more accurately estimate the transfer of activated elements to the environment. The test is using two proven, industry-standard methods—direct corrosion testing using metal coupons, and monitored corrosion testing using electrical/resistance probes—to determine corrosion rates for various metal alloys generally representing the metals of interest buried at the SDA, including Type 304L stainless steel, Type 316L stainless steel, Inconel 718, Beryllium S200F, Aluminum 6061, Zircaloy-4, low-carbon steel, and Ferralium 255. In the direct testing, metal coupons are retrieved for corrosion evaluation after having been buried in SDA backfill soil and exposed to natural SDA environmental conditions for times ranging from one year to as many as 32 years, depending on research needs and funding availability. In the monitored testing, electrical/resistance probes buried in SDA backfill soil will provide corrosion data for the duration of the test or until the probes fail. This report provides an update describing the current status of the test and documents results to date. Data from the one-year and three-year results are also included, for comparison and evaluation of trends. In the six-year results, most metals being tested showed extremely low measurable rates of general corrosion. For Type 304L stainless steel, Type 316L stainless steel, Inconel 718, and Ferralium 255, corrosion rates fell in the range of “no reportable” to 0.0002 mils per year (MPY). Corrosion rates for Zircaloy-4 ranged from no measurable corrosion to 0.0001 MPY. These rates are two orders of magnitude lower than those specified in the performance assessment for the SDA. The corrosion on the carbon steel, beryllium, and aluminum were more evident with a clear difference in corrosion performance between the 4-ft and 10-ft levels. Notable surface corrosion products were evident as well as numerous pit initiation sites. Since the corrosion of the beryllium and aluminum is characterized by pitting, the geometrical character of the corrosion becomes more significant than the general corrosion rate. Both pitting factor and weight loss data should be used together. For six-year exposure, the maximum carbon steel corrosion rate was 0.3643 MPY while the maximum beryllium corrosion rate was 0.3282 MPY and the maximum aluminum corrosion rate was 0.0030 MPY
The Right Place at the Right Time: Creative Spaces in Libraries
Purpose
This essay explores the recent trend in libraries: that of the establishment of spaces specifically set aside for creative work. The rise of these dedicated creative spaces is owed to a confluence of factors that happen to be finding their expression together in recent years. This essay examines the history of these spaces and explores the factors that gave rise to them and will fuel them moving forward.
Design/Methodology/Approach
A viewpoint piece, this essay combines historical research and historical/comparative analyses to examine the ways by which libraries have supported creative work in the past and how they may continue to do so into the 21st century.
Findings
The key threads brought together include a societal recognition of the value of creativity and related skills and attributes; the philosophies, values, and missions of libraries in both their longstanding forms and in recent evolutions; the rise of participatory culture as a result of inexpensive technologies; improved means to build community and share results of efforts; and library experience and historical practice in matters related to creativity. The chapter concludes with advice for those interested in the establishment of such spaces, grounding those reflections in the author’s experiences in developing a new creative space at Virginia Commonwealth University.
Originality/value
While a number of pieces have been written that discuss the practicalities of developing certain kinds of creative spaces, very little has been written that situates these spaces in larger social and library professional contexts; this essay begins to fill that gap
Veillonella rogosae sp. nov., an anaerobic, Gram-negative coccus isolated from dental plaque
Strains of a novel anaerobic, Gram-negative coccus were isolated from the supra-gingival plaque of children. Independent strains from each of six subjects were shown, at a phenotypic level and based on 16S rRNA gene sequencing, to be members of the genus Veillonella. Analysis revealed that the six strains shared 99.7 % similarity in their 16S rRNA gene sequences and 99.0 % similarity in their rpoB gene sequences. The six novel strains formed a distinct group and could be clearly separated from recognized species of the genus Veillonella of human or animal origin. The novel strains exhibited 98 and 91 % similarity to partial 16S rRNA and rpoB gene sequences of Veillonella parvula ATCC 10790T, the most closely related member of the genus. The six novel strains could be differentiated from recognized species of the genus Veillonella based on partial 16S rRNA and rpoB gene sequencing. The six novel strains are thus considered to represent a single novel species of the genus Veillonella, for which the name Veillonella rogosae sp. nov. is proposed. The type strain is CF100T (=CCUG 54233T=DSM 18960T)
- …