Cider Production from King Mandarin (Citrus nobilis Lour.) and Its Antioxidant Activity

With the necessity of diversifying alcoholic beverages, cider has become a kind of drink that can fulfill this demand. This is because the cider will be diversified depending on the kinds of fruit that are chosen to be used for the cider fermentation. Therefore, this study aims to investigate the effects of dilution ratio, Brix, pH, and yeast concentration on the production of cider from king mandarin (Citrus nobilis Lour.), and to evaluate the analytical characteristics and antioxidant activity of the product. After the investigation, it can be claimed that the dilution of the juice causes the ethanol content to decrease, whereas the increase of Brix, pH, and yeast concentration makes the ethanol content increase. However, the proportional increase in the ethanol content with Brix, pH, and yeast concentration has its limitations. Specifically, when the Brix and the yeast concentrations were, respectively, higher than 16°Brix and 0.04%, the ethanol content tended to maintain the same. This is also the same when the pH was lower than 4.5. In addition, by using the DPPH and ABTS●+ methods, the antioxidant activity of cider is estimated to be lower than the one of the juice before fermentation, which is smaller than 3.78 times for the DPPH method and 3.76 times for the ABTS●+ method

THÀNH PHẦN HÓA HỌC VÀ HOẠT TÍNH KHÁNG VI SINH VẬT GÂY BỆNH CỦA TINH DẦU TỪ VỎ BƯỞI DA XANH (Citrus maxima (Burm.) Merr.)

Pomelo is a Vietnam’s plant species with high nutritional and economic value. Besides, pomelo essential oil contains numerous compounds with high biological activity. The essential oil is extracted by using steam distillation, and its chemical composition is determined by means of GC-MS. The major components are limonene (91.19%), b-myrcene (2.92%), a-phellandrene (1.98%), and a-pinene (1.19%). The antimicrobial activity of essential oils is tested against pathogenic Gram-positive bacteria (Bacillus cereus, Staphylococcus aureus), Gram-negative bacteria (Escherichia coli), and Aspergillus flavus at different concentrations with the agar well diffusion method. This essential oil is active against B. cereus, S. aureus, and E. coli with inhibition diameter zones at 8.3–11.3, 10.3–18.7, and 9.0–11.7 mm, respectively, and inhibits A. flavus mold with 18.9–65.0% efficiency.Bưởi là loài cây không chỉ có giá trị cao về mặt dinh dưỡng mà còn có giá trị cao về mặt kinh tế và được trồng phổ biến ở Việt Nam. Ngoài ra, tinh dầu bưởi chứa nhiều hợp chất có hoạt tính sinh học cao. Tinh dầu bưởi được chiết xuất bằng phương pháp chưng cất lôi cuốn hơi nước và thành phần hóa học được phân tích bằng phương pháp GC-MS. Thành phần chính của tinh dầu gồm limonene (91,19%), b-myrcene (2,92%), a-phellandrene (1,98%) và a-pinene (1,19%). Hoạt tính kháng vi sinh vật của tinh dầu được khảo sát với vi khuẩn Gram dương (Bacillus cereus, Staphylococcus aureus), Gram âm (Escherichia coli) và nấm mốc Aspergillus flavus ở nồng độ 5, 10, 25 và 50% bằng phương pháp khuếch tán giếng thạch. Tinh dầu có khả năng kháng B. cereus, S. aureus và E. coli với đường kính vòng kháng khuẩn lần lượt là 8,3–11,3, 10,3–18,7 và 9,0–11,7 mm và ức chế sự phát triển của A. flavus (18,9–65,0%)

Awareness and preparedness of healthcare workers against the first wave of the COVID-19 pandemic: A cross-sectional survey across 57 countries.

BACKGROUND: Since the COVID-19 pandemic began, there have been concerns related to the preparedness of healthcare workers (HCWs). This study aimed to describe the level of awareness and preparedness of hospital HCWs at the time of the first wave. METHODS: This multinational, multicenter, cross-sectional survey was conducted among hospital HCWs from February to May 2020. We used a hierarchical logistic regression multivariate analysis to adjust the influence of variables based on awareness and preparedness. We then used association rule mining to identify relationships between HCW confidence in handling suspected COVID-19 patients and prior COVID-19 case-management training. RESULTS: We surveyed 24,653 HCWs from 371 hospitals across 57 countries and received 17,302 responses from 70.2% HCWs overall. The median COVID-19 preparedness score was 11.0 (interquartile range [IQR] = 6.0-14.0) and the median awareness score was 29.6 (IQR = 26.6-32.6). HCWs at COVID-19 designated facilities with previous outbreak experience, or HCWs who were trained for dealing with the SARS-CoV-2 outbreak, had significantly higher levels of preparedness and awareness (p<0.001). Association rule mining suggests that nurses and doctors who had a 'great-extent-of-confidence' in handling suspected COVID-19 patients had participated in COVID-19 training courses. Male participants (mean difference = 0.34; 95% CI = 0.22, 0.46; p<0.001) and nurses (mean difference = 0.67; 95% CI = 0.53, 0.81; p<0.001) had higher preparedness scores compared to women participants and doctors. INTERPRETATION: There was an unsurprising high level of awareness and preparedness among HCWs who participated in COVID-19 training courses. However, disparity existed along the lines of gender and type of HCW. It is unknown whether the difference in COVID-19 preparedness that we detected early in the pandemic may have translated into disproportionate SARS-CoV-2 burden of disease by gender or HCW type

Safety and efficacy of fluoxetine on functional outcome after acute stroke (AFFINITY): a randomised, double-blind, placebo-controlled trial

Background Trials of fluoxetine for recovery after stroke report conflicting results. The Assessment oF FluoxetINe In sTroke recoverY (AFFINITY) trial aimed to show if daily oral fluoxetine for 6 months after stroke improves functional outcome in an ethnically diverse population. Methods AFFINITY was a randomised, parallel-group, double-blind, placebo-controlled trial done in 43 hospital stroke units in Australia (n=29), New Zealand (four), and Vietnam (ten). Eligible patients were adults (aged ≥18 years) with a clinical diagnosis of acute stroke in the previous 2–15 days, brain imaging consistent with ischaemic or haemorrhagic stroke, and a persisting neurological deficit that produced a modified Rankin Scale (mRS) score of 1 or more. Patients were randomly assigned 1:1 via a web-based system using a minimisation algorithm to once daily, oral fluoxetine 20 mg capsules or matching placebo for 6 months. Patients, carers, investigators, and outcome assessors were masked to the treatment allocation. The primary outcome was functional status, measured by the mRS, at 6 months. The primary analysis was an ordinal logistic regression of the mRS at 6 months, adjusted for minimisation variables. Primary and safety analyses were done according to the patient's treatment allocation. The trial is registered with the Australian New Zealand Clinical Trials Registry, ACTRN12611000774921. Findings Between Jan 11, 2013, and June 30, 2019, 1280 patients were recruited in Australia (n=532), New Zealand (n=42), and Vietnam (n=706), of whom 642 were randomly assigned to fluoxetine and 638 were randomly assigned to placebo. Mean duration of trial treatment was 167 days (SD 48·1). At 6 months, mRS data were available in 624 (97%) patients in the fluoxetine group and 632 (99%) in the placebo group. The distribution of mRS categories was similar in the fluoxetine and placebo groups (adjusted common odds ratio 0·94, 95% CI 0·76–1·15; p=0·53). Compared with patients in the placebo group, patients in the fluoxetine group had more falls (20 [3%] vs seven [1%]; p=0·018), bone fractures (19 [3%] vs six [1%]; p=0·014), and epileptic seizures (ten [2%] vs two [<1%]; p=0·038) at 6 months. Interpretation Oral fluoxetine 20 mg daily for 6 months after acute stroke did not improve functional outcome and increased the risk of falls, bone fractures, and epileptic seizures. These results do not support the use of fluoxetine to improve functional outcome after stroke

A study on the influence of printing orientation in metal printing using material extrusion technology on the mechanical properties of 17-4 stainless steel products

This study investigated the influence of print orientation on the mechanical properties of 17-4 PH stainless steel parts fabricated using material extrusion technology. Tensile test specimens were 3D printed in different orientations (flat, on-edge, and upright), and their mechanical properties were evaluated. The results showed that the print orientation significantly affected the ultimate tensile strength, yield strength, and elongation at failure of the specimens. The flat and on-edge orientations exhibited similar mechanical properties, while the upright orientation resulted in lower strength and higher fracture susceptibility. Hardness measurements also indicated variations in hardness distribution among the orientations. The findings emphasize the importance of optimizing the print orientation parameter to achieve desired mechanical characteristics in 17-4 PH stainless steel parts

Production of Glyoxylate from Glucose in Engineered <i>Escherichia coli</i>

Glyoxylates are essential intermediates in several metabolic pathways and have a broad range of industrial applications. In this study, we propose a novel method for producing glyoxylate from glucose using engineered Escherichia coli BW25113. To direct the production of glyoxylate from glucose, malate synthase A (aceB), malate synthase G (glcB), glyoxylate carboligase (gcl), and glyoxylate/hydroxypyruvate reductase A (ycdW) genes were disrupted, and the glyoxylate shunt was reinforced in the disruptants by the overexpression of citrate synthase (gltA) and isocitrate lyase (aceA). In flask cultivation using M9 medium supplemented with 1% glucose, the disruptant E. coli BW25113 ΔaceB ΔglcB Δgcl ΔycdW produced 0.93 ± 0.17 g/L of glyoxylate. Further overexpression of gltA and aceA in the disruptant resulted in an improvement in glyoxylate production to 1.15 ± 0.02 g/L. By expressing a heterologous gene, pyc, in the engineered E. coli, the accumulation of intracellular oxaloacetate remarkably improved, leading to glyoxylate production of up to 2.42 ± 0.00 g/L with specific productivity at 4.22 ± 0.09 g/g-cell. To date, this is the highest reported titer and specific productivity of glyoxylate in E. coli

Extraction and evaluation of antimicrobial activities of essential oils from orange peel (Citrus nobilis) grown in Can Tho City, Vietnam

ABSTRACT: This study determined the extraction conditions, chemical composition, and antimicrobial activities of the essential oils of Citrus nobilis. The results illustrated that soaking in the 9% (w/v) NaCl solution for 2 h with a sample and solvent ratio of 1:3 (w/v) and a subsequent extraction time of 45 min yielded the highest extraction efficiency, reaching 3.66% (w/w). The main chemical components of the essential oils were limonene (90.42%), β-myrcene (4.7%), and α-pinene (1.22%). The minimum inhibitory concentration (MIC) at the density of 5x104, 5x105, and 5x106 cells/mL of Escherichia coli were 100, 125, and 125 mg/mL, respectively; for Staphylococcus aureus were 75, 100, and 125 mg/mL, respectively; and for Bacillus cereus were 50, 75, and 100 mg/mL, respectively. The minimum bactericidal concentration (MBC) at densities of 5x104, 5x105, 5x106 cells/mL of E. coli were 175, 225, 225 mg/mL, S. aureus were 150, 200, 225 mg/mL, and B. cereus were 125, 175, 200 mg/mL, respectively. The inhibitory activities of Aspergillus flavus of orange essential oils according to the agar dilution method at concentrations of 0.025-0.1%) on the 5th day were 8.84-30.61%

Cider Production from King Mandarin (

With the necessity of diversifying alcoholic beverages, cider has become a kind of drink that can fulfill this demand. This is because the cider will be diversified depending on the kinds of fruit that are chosen to be used for the cider fermentation. Therefore, this study aims to investigate the effects of dilution ratio, Brix, pH, and yeast concentration on the production of cider from king mandarin (Citrus nobilis Lour.), and to evaluate the analytical characteristics and antioxidant activity of the product. After the investigation, it can be claimed that the dilution of the juice causes the ethanol content to decrease, whereas the increase of Brix, pH, and yeast concentration makes the ethanol content increase. However, the proportional increase in the ethanol content with Brix, pH, and yeast concentration has its limitations. Specifically, when the Brix and the yeast concentrations were, respectively, higher than 16°Brix and 0.04%, the ethanol content tended to maintain the same. This is also the same when the pH was lower than 4.5. In addition, by using the DPPH and ABTS●+ methods, the antioxidant activity of cider is estimated to be lower than the one of the juice before fermentation, which is smaller than 3.78 times for the DPPH method and 3.76 times for the ABTS●+ method

Production of sweet corn milk yogurt using

This study aimed to produce a new functional fermented food product from sweet corn milk yogurt using Lactobacillus casei. The suitable conditions for lactic acid fermentation in sweet corn milk were investigated, including initial bacterial concentration, ratio of sweet corn milk and cow milk, sugar concentration, fermentation time and temperature. The results showed that the appropriate conditions for sweet corn milk yogurt production as follow: initial bacterial concentration was 106 cells/mL, fermentation time was 12 h at 37°C and sweet corn milk was fortified with cow milk at a ratio of 2:8 and 12% of sugar. The sweet corn milk yogurt was slightly yellow, smooth texture and thick body with the aroma of corn and acidic smell. The product remained acceptable taste and texture within 4 weeks at 0°C and 2 weeks at 5°C