Primena modifikovanih tanina u antikorozionim alkidnim premazima

The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin modification were applied: direct method using ammonium hydroxide, ammonium hydroxide/ammonium chloride buffer or diethylenetriamine (DETA); and a two-step method including tannin modification with epichlorohydrin (ECH) in first step to produce epoxy modified tannin, ET, and further modification with heteroaromatic amines or linseed oil fatty acids (LFA) in second step. The obtained anticorrosive additives were characterized using ATR-FTIR, 1H and 13C NMR spectroscopies and elemental analysis. Epoxy, amino, hydroxyl, acid and iodine values of the synthesized inhibitors were determined according to standard methods. The prepared alkyd coating with tannin inhibitors was tested according to standard SRPS EN ISO 4628 method. Anticorrosive coating containing modified tannin based additive showed increased anticorrosive properties, good adhesion and coverage comparing to the coating with zinc phosphate additive. The alkyd coating films based on ET-LFA and ET modified with 2-amino-5- mercapto-1,3,4-thiadiazole showed best anticorrosive results.U ovom radu prikazana je sinteza antikorozionih aditiva na bazi hemijski modifikovanog tanina i njihova primena u alkidnim premazima u cilju poboljšanja antikorozionih svojstava. Prikazane su dve metode modifikacije tanina: direktna modifikacija tanina primenom amonijum-hidroksida, amonijum-hidroksid/amonijum-hlorid pufera ili dietilentriamina (DETA); i dvostepena modifikacija tanina koja u prvom stupnju uključuje modifikaciju epihlorhidrinom sa ciljem da se dobije tannin sa epoksi terminiranim funkcionalnim grupama, ET, i modifikaciju ET tanina sa heteroaromatičnim aminima ili masnim kiselinama izolovanim iz lanenog ulja (LFA) u drugom stupnju. Sintetisani antikorozioni aditivi su okarakterisani primenom ATR-FTIR, 1H i 13C NMR spektroskopija, i elementalnom analizom. Sadržaj epoksi, amino, hidroksilnih i karboksilnih grupa i vrednost jodnog broja sintetisanih aditiva određen je prema standardnim metodama. Alkidni premazi koji sadrže antikorozione aditive na bazi modifikovanog tanina ispitani su prema standardnoj SRPS EN ISO 4628 metodi. Antikorozivni alkidni premazi na bazi modfikovanih tanina pokazali su poboljšane antikorozione karakteristike i adheziju u poređenju sa alkidnim premazom na bazi cink-fosfata. Alkidni premazi koji sadrže dvostepeno modifikovani tanin sa LFA i 2-amino-5-merkapto-1,3,4-tiadiazolom pokazali su najbolje antikorozione karakteristike

Eco-friendly Elderberry based sorbent for removing Pb2+ ions from aqueous solutions

Elderberry (Sambucus nigra) pith was modified with polyethyleneimine (PEI) in order to improve the adsorption properties. Characterization of both dried Sambucus nigra pith (DSNP) and amino modification of elderberry pith with branched PEI (PEI/DSNP) was performed by: Fourier-transform infrared spectroscopy (FTIR), optical microscopy, and porosity determination. The amine and ester number, as well as acid value, were determined on DSNP and PEI/DSNP samples using standard volumetric methods. The samples were used as adsorbents for Pb2+ ions from an aqueous solution in a batch system. The obtained results were fitted using suitable equilibrium isotherm and kinetic models. The maximum adsorption capacity for Pb2+ ions on DSNP and aminаted sample, obtained using Langmuir adsorption isotherm at 298 K, are 18.9 and 47.8 mg g-1, respectively. Based on the kinetic studies, the adsorption process follows the pseudo second-order model. Thermodynamic parameters showed that the adsorption process is endothermic and spontaneous. In general, the overall adsorption process was improved by modifying starting material with branched PEI modifier by introducing large numbers of amino functionalities having high affinity to cations