238 research outputs found

    Pore evolution in interstellar ice analogues: simulating the effects of temperature increase

    Get PDF
    Context. The level of porosity of interstellar ices - largely comprised of amorphous solid water (ASW) - contains clues on the trapping capacity of other volatile species and determines the surface accessibility that is needed for solid state reactions to take place. Aims. Our goal is to simulate the growth of amorphous water ice at low temperature (10 K) and to characterize the evolution of the porosity (and the specific surface area) as a function of temperature (from 10 to 120 K). Methods. Kinetic Monte Carlo simulations are used to mimic the formation and the thermal evolution of pores in amorphous water ice. We follow the accretion of gas-phase water molecules as well as their migration on surfaces with different grid sizes, both at the top growing layer and within the bulk. Results. We show that the porosity characteristics change substantially in water ice as the temperature increases. The total surface of the pores decreases strongly while the total volume decreases only slightly for higher temperatures. This will decrease the overall reaction efficiency, but in parallel, small pores connect and merge, allowing trapped molecules to meet and react within the pores network, providing a pathway to increase the reaction efficiency. We introduce pore coalescence as a new solid state process that may boost the solid state formation of new molecules in space and has not been considered so far.Comment: 9 pages, 8 figures Accepted for publication in A&

    Porosity measurements of interstellar ice mixtures using optical laser interference and extended effective medium approximations

    Get PDF
    Aims. This article aims to provide an alternative method of measuring the porosity of multi-phase composite ices from their refractive indices and of characterising how the abundance of a premixed contaminant (e.g., CO2) affects the porosity of water-rich ice mixtures during omni-directional deposition. Methods. We combine optical laser interference and extended effective medium approximations (EMAs) to measure the porosity of three astrophysically relevant ice mixtures: H2O:CO2=10:1, 4:1, and 2:1. Infrared spectroscopy is used as a benchmarking test of this new laboratory-based method. Results. By independently monitoring the O-H dangling modes of the different water-rich ice mixtures, we confirm the porosities predicted by the extended EMAs. We also demonstrate that CO2 premixed with water in the gas phase does not significantly affect the ice morphology during omni-directional deposition, as long as the physical conditions favourable to segregation are not reached. We propose a mechanism in which CO2 molecules diffuse on the surface of the growing ice sample prior to being incorporated into the bulk and then fill the pores partly or completely, depending on the relative abundance and the growth temperature.Comment: 9 pages, 6 figures, 1 table. Accepted for publication in A&

    Grain Surface Models and Data for Astrochemistry

    Get PDF
    AbstractThe cross-disciplinary field of astrochemistry exists to understand the formation, destruction, and survival of molecules in astrophysical environments. Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. A broad consensus has been reached in the astrochemistry community on how to suitably treat gas-phase processes in models, and also on how to present the necessary reaction data in databases; however, no such consensus has yet been reached for grain-surface processes. A team of ∼25 experts covering observational, laboratory and theoretical (astro)chemistry met in summer of 2014 at the Lorentz Center in Leiden with the aim to provide solutions for this problem and to review the current state-of-the-art of grain surface models, both in terms of technical implementation into models as well as the most up-to-date information available from experiments and chemical computations. This review builds on the results of this workshop and gives an outlook for future directions

    Results from the first use of low radioactivity argon in a dark matter search

    Get PDF
    Liquid argon is a bright scintillator with potent particle identification properties, making it an attractive target for direct-detection dark matter searches. The DarkSide-50 dark matter search here reports the first WIMP search results obtained using a target of low-radioactivity argon. DarkSide-50 is a dark matter detector, using two-phase liquid argon time projection chamber, located at the Laboratori Nazionali del Gran Sasso. The underground argon is shown to contain Ar-39 at a level reduced by a factor (1.4 +- 0.2) x 10^3 relative to atmospheric argon. We report a background-free null result from (2616 +- 43) kg d of data, accumulated over 70.9 live-days. When combined with our previous search using an atmospheric argon, the 90 % C.L. upper limit on the WIMP-nucleon spin-independent cross section based on zero events found in the WIMP search regions, is 2.0 x 10^-44 cm^2 (8.6 x 10^-44 cm^2, 8.0 x 10^-43 cm^2) for a WIMP mass of 100 GeV/c^2 (1 TeV/c^2 , 10 TeV/c^2).Comment: Accepted by Phys. Rev.

    Cosmic Rays: The Second Knee and Beyond

    Full text link
    We conduct a review of experimental results on Ultra-High Energy Cosmic Rays (UHECR's) including measurements of the features of the spectrum, the composition of the primary particle flux and the search for anisotropy in event arrival direction. We find that while there is a general consensus on the features in the spectrum -- the Second Knee, the Ankle, and (to a lesser extent) the GZK Cutoff -- there is little consensus on the composition of the primaries that accompany these features. This lack of consensus on the composition makes interpretation of the agreed upon features problematic. There is also little direct evidence about potential sources of UHECRs, as early reports of arrival direction anisotropies have not been confirmed in independent measurements.Comment: 46 pages, 30 figures. Topical Review to appear in J. Physics

    Ustekinumab as Induction and Maintenance Therapy for Crohn’s Disease

    Get PDF
    BACKGROUND Ustekinumab, a monoclonal antibody to the p40 subunit of interleukin-12 and inter-leukin-23, was evaluated as an intravenous induction therapy in two populations with moderately to severely active Crohn’s disease. Ustekinumab was also evaluated as subcutaneous maintenance therapy. METHODS We randomly assigned patients to receive a single intravenous dose of ustekinumab (either 130 mg or approximately 6 mg per kilogram of body weight) or placebo in two induction trials. The UNITI-1 trial included 741 patients who met the criteria for primary or secondary nonresponse to tumor necrosis factor (TNF) antagonists or had unacceptable side effects. The UNITI-2 trial included 628 patients in whom conventional therapy failed or unacceptable side effects occurred. Patients who completed these induction trials then participated in IM-UNITI, in which the 397 patients who had a response to ustekinumab were randomly assigned to receive subcutaneous maintenance injections of 90 mg of ustekinumab (either every 8 weeks or every 12 weeks) or placebo. The primary end point for the induction trials was a clinical response at week 6 (defined as a decrease from baseline in the Crohn’s Disease Activity Index [CDAI] score of ≥100 points or a CDAI score <150). The primary end point for the maintenance trial was remission at week 44 (CDAI score <150). RESULTS The rates of response at week 6 among patients receiving intravenous ustekinumab at a dose of either 130 mg or approximately 6 mg per kilogram were significantly higher than the rates among patients receiving placebo (in UNITI-1, 34.3%, 33.7%, and 21.5%, respectively, with P≤0.003 for both comparisons with placebo; in UNITI-2, 51.7%, 55.5%, and 28.7%, respectively, with P<0.001 for both doses). In the groups receiving maintenance doses of ustekinumab every 8 weeks or every 12 weeks, 53.1% and 48.8%, respectively, were in remission at week 44, as compared with 35.9% of those receiving placebo (P = 0.005 and P = 0.04, respectively). Within each trial, adverse-event rates were similar among treatment groups. CONCLUSIONS Among patients with moderately to severely active Crohn’s disease, those receiving intravenous ustekinumab had a significantly higher rate of response than did those receiving placebo. Subcutaneous ustekinumab maintained remission in patients who had a clinical response to induction therapy. (Funded by Janssen Research and Development; ClinicalTrials.gov numbers, NCT01369329, NCT01369342, and NCT01369355.

    Regulatory challenges and risk assessment of graphene-enabled products: insights for safe commercialisation in Europe

    Get PDF
    The development of graphene-enabled products in a variety of industrial sectors like medical devices, textiles, aerospace, or food contact materials has raised significant regulatory challenges with regards to risk assessment. The work performed under the Graphene Flagship Work Package SH11 termed SafeGraph, aimed to identify challenges while implementing regulation as well as to develop a regulatory roadmap addressing these issues. This study explores and discusses the regulatory gaps and safety assessment challenges associated with graphene-enabled products and based on regulatory requirements with a particular focus on risk assessment, exposure concerns, and potential environmental impacts. Through case studies involving skin sensors, drinking water filters, wearable electronics, and de-icing systems for aircrafts, we identified critical safety and compliance issues across various sectors. The work used four Graphene Flagship case studies as showcases to address the above markets (CHEMsens, GRAPHIL, WEARgraph and GICE). These case studies underscore the need for updated regulatory guidelines tailored to graphene’s unique properties. This study provides insights into current challenges of assessing risks and proposes steps to ensure safe and sustainable commercialisation of graphene-based products, advocating for harmonised regulatory frameworks

    Laser desorption time-of-flight mass spectrometry of ultraviolet photo-processed ices

    Get PDF
    A new ultra-high vacuum experiment is described that allows studying photo-induced chemical processes in interstellar ice analogues. MATRI2CES - a Mass Analytical Tool to study Reactions in Interstellar ICES applies a new concept by combining laser desorption and time-of-flight mass spectrometry with the ultimate goal to characterize in situ and in real time the solid state evolution of organic compounds upon UV photolysis for astronomically relevant ice mixtures and temperatures. The performance of the experimental setup is demonstrated by the kinetic analysis of the different photoproducts of pure methane (CH4) ice at 20 K. A quantitative approach provides formation yields of several new species with up to four carbon atoms. Convincing evidence is found for the formation of even larger species. Typical mass resolutions obtained range from M/M ∼320 to ∼400 for CH4 and argon, respectively. Additional tests show that the typical detection limit (in monolayers) is ≤0.02 ML, substantially more sensitive than the regular techniques used to investigate chemical processes in interstellar ices.Seventh Framework Programme (FP7)Laboratory astrophysics and astrochemistr
    corecore