Regional variation in the microhardness and mineral content of porcine long bones

Pig carcasses are frequently used as models for the human cadaver in the study of trauma and wound patterns. Limited availability and ethical concerns over the use of human tissue has meant that porcine bone is often used as a substitute for human bone in such studies. However, there is a lack of comprehensive mechanical data to make informed decisions on the choice of model to account for variations in the age, sex and body mass. In this study, variation in the properties of cortical bone along the length of the porcine humerus and ulna, from five female pigs aged over 36 months, was investigated by using Vickers microhardness tests. Transverse sections were taken from the proximal, mid and distal regions of the diaphyses, and tests were carried out in the anterior, medial, posterior, and lateral quadrants. Microhardness was also measured across the cortex from the periosteal to endosteal surfaces. Regional variation in mineral content was explored by analysing samples, taken immediately adjacent to the hardness tests, using Atomic Absorption Spectroscopy. Mechanical data are discussed in relation to mineral content, morphology and loading of the limbs, within a forensic context

Flexural properties of the equine hoof wall

The equine hoof wall is a hard keratinous structure which transmits forces generated when the hoof contacts the ground to the skeleton of the horse. During locomotion, the hoof capsule is known to yield under impact resulting in an inward curvature of the dorsal wall and expansion of the heels. However, whilst researchers have studied the tensile and compressive properties of the hoof wall, there is a lack of data on the flexural properties in different locations around the hoof capsule. In this study the flexural properties and hydration status of the hoof wall was investigated, in two orthogonal directions, in different locations around the hoof capsule. The hoof was divided into three regions: the dorsal-most aspect (toe); the medial and lateral regions (quarters) and the heels caudally. Beams were cut both perpendicular and parallel to the axis of the tubules, termed transverse and longitudinal beams respectively. Differences in the mechanical properties were then investigated using three-point bending tests. There were considerable differences in the mechanical properties around the hoof capsule; transverse beams from the toe were 81% stiffer and 28% stronger than those from the heels. This corresponded with differences in the hydration of the hoof wall; beams from the toe had a lower water content (24.1±0.25%) than those from the heels (28.3±0.37%). Differences in the flexural properties are thought to be largely a result of variation in the water content. Mechanical data are further discussed in relation to variation in the structure and loading of the hoof wall

Implications of the Information Technology Revolution for People with Disabilities

The paper focuses on opportunities for the integration of persons with different types of disabilities in the information technology (IT) labour market. Recent IT developments are identified and examined for their potentially harmful or beneficial effects on access to the IT labour market for persons with disabilities. The opportunities created by new job creation, new forms of training, teleworking, and the role of assistive technologies in facilitating workplace accommodations are briefly described. The focus is on new options for the design and implementation of computer-related assistive technologies in the workplace, and the impact of teleworking and the World Wide Web on employability and work-related training of persons with disabilities. The paper closes with a brief discussion of the roles that government agencies, business firms, labour unions, non-governmental organisations and education can play to help people with disabilities join the IT revolution and share its benefits

Designing citizen science tools for learning: lessons learnt from the iterative development of nQuire

This paper reports on a 4-year research and development case study about the design of citizen science tools for inquiry learning. It details the process of iterative pedagogy-led design and evaluation of the nQuire toolkit, a set of web-based and mobile tools scaffolding the creation of online citizen science investigations. The design involved an expert review of inquiry learning and citizen science, combined with user experience studies involving more than 200 users. These have informed a concept that we have termed ‘citizen inquiry’, which engages members of the public alongside scientists in setting up, running, managing or contributing to citizen science projects with a main aim of learning about the scientific method through doing science by interaction with others. A design-based research (DBR) methodology was adopted for the iterative design and evaluation of citizen science tools. DBR was focused on the refinement of a central concept, ‘citizen inquiry’, by exploring how it can be instantiated in educational technologies and interventions. The empirical evaluation and iteration of technologies involved three design experiments with end users, user interviews, and insights from pedagogy and user experience experts. Evidence from the iterative development of nQuire led to the production of a set of interaction design principles that aim to guide the development of online, learning-centred, citizen science projects. Eight design guidelines are proposed: users as producers of knowledge, topics before tools, mobile affordances, scaffolds to the process of scientific inquiry, learning by doing as key message, being part of a community as key message, every visit brings a reward, and value users and their time

Diverse Functions of Retinoic Acid in Brain Vascular Development

As neural structures grow in size and increase metabolic demand, the CNS vasculature undergoes extensive growth, remodeling, and maturation. Signals from neural tissue act on endothelial cells to stimulate blood vessel ingression, vessel patterning, and acquisition of mature brain vascular traits, most notably the blood–brain barrier. Using mouse genetic and in vitro approaches, we identified retinoic acid (RA) as an important regulator of brain vascular development via non-cell-autonomous and cell-autonomous regulation of endothelial WNT signaling. Our analysis of globally RA-deficient embryos (Rdh10 mutants) points to an important, non-cell-autonomous function for RA in the development of the vasculature in the neocortex. We demonstrate that Rdh10 mutants have severe defects in cerebrovascular development and that this phenotype correlates with near absence of endothelial WNT signaling, specifically in the cerebrovasculature, and substantially elevated expression of WNT inhibitors in the neocortex. We show that RA can suppress the expression of WNT inhibitors in neocortical progenitors. Analysis of vasculature in non-neocortical brain regions suggested that RA may have a separate, cell-autonomous function in brain endothelial cells to inhibit WNT signaling. Using both gain and loss of RA signaling approaches, we show that RA signaling in brain endothelial cells can inhibit WNT-β-catenin transcriptional activity and that this is required to moderate the expression of WNT target Sox17. From this, a model emerges in which RA acts upstream of the WNT pathway via non-cell-autonomous and cell-autonomous mechanisms to ensure the formation of an adequate and stable brain vascular plexus

Validation of PIRAT, a Novel Tool for Beam-Like Structures Subject to Seismic Induced Misalignment of Guiding Sleeves

International audienceThis paper is a comparison of analytical and numerical evaluations for a model system, which consists of a vertically suspended beam-like structure, guided by a pair of sleeves subjected to static or dynamic transverse displacements. The goal of these analyses is to evaluate and describe the mechanical behavior of such system during situations involving significant misalignment of the guiding sleeves, primarily caused by horizontal seismic vibrations. The analytical evaluation of the beam is performed using a solver in the novel tool PIRAT that incorporates the Bresse method to determine deflection shape and stress of the beam, where the numerical calibration uses a finite element solver called Cast3M. Both of these methods also investigate the evolving contact between the beam and its guiding sleeves (including a rigid lower sleeve and a semi-rigid upper sleeve) by an iterative algorithm to add additional contact zones / pressures to more realistically replicate the natural system. Illustrative computations are performed in order to verify that both methods are able to produce the same results / trends using a static deformation profile for the guiding sleeves. With the static models sufficiently validated and calibrated, the preliminary dynamic response of the system is presented. These are produced by replacing the static Bresse method with the dynamic Euler-Bernoulli equation of motion in the analytical framework. This is also compared to the dynamic capabilities of Cast3M, which relies on modal analysis, for validation. The work in this paper signifies the next step in developing a set of tools for considering dynamic responses to ensure the proper behavior of such systems during seismic activities through the use of analytical evaluations

'This is what democracy looks like' : New Labour's blind spot and peripheral vision

New Labour in government since 1997 has been roundly criticized for not possessing a clear, coherent and consistent democratic vision. The absence of such a grand vision has resulted, from this critical perspective, in an absence of 'joined-up' thinking about democracy in an evolving multi-level state. Tensions have been all too apparent between the government's desire to exert central direction - manifested in its most pathological form as 'control freakery' - and its democratising initiatives derived from 'third-way' obsessions with 'decentralising', 'empowering' and 'enabling'. The purpose of this article is to examine why New Labour displayed such apparently impaired democratic vision and why it appeared incapable of conceiving of democratic reform 'in the round'. This article seeks to explain these apparent paradoxes, however, through utilising the notion of 'macular degeneration'. In this analysis, the perceived democratic blind spot of New Labour at Westminster is connected to a democratic peripheral vision, which has envisaged innovative participatory and decentred initiatives in governance beyond Westminster

Core pinning by intragranular nanoprecipitates in polycrystalline MgCNi_3

The nanostructure and magnetic properties of polycrystalline MgCNi_3 were studied by x-ray diffraction, electron microscopy, and vibrating sample magnetometry. While the bulk flux-pinning force curve F_p(H) indicates the expected grain-boundary pinning mechanism just below T_c = 7.2 K, a systematic change to pinning by a nanometer-scale distribution of core pinning sites is indicated by a shift of F_p(H) with decreasing temperature. The lack of scaling of F_p(H) suggests the presence of 10 to 20% of nonsuperconducting regions inside the grains, which are smaller than the diameter of fluxon cores 2xi at high temperature and become effective with decreasing temperature when xi(T) approaches the nanostructural scale. Transmission electron microscopy revealed cubic and graphite nanoprecipitates with 2 to 5 nm size, consistent with the above hypothesis since xi(0) = 6 nm. High critical current densities, more than 10^6 A/cm^2 at 1 T and 4.2 K, were obtained for grain colonies separated by carbon. Dirty-limit behavior seen in previous studies may be tied to electron scattering by the precipitates, indicating the possibility that strong core pinning might be combined with a technologically useful upper critical field if versions of MgCNi_3 with higher T_c can be found.Comment: 5 pages, 6 figures, submitted to PR