4,542 research outputs found
On the simulation of interactive non-verbal behaviour in virtual humans
Development of virtual humans has focused mainly in two broad areas - conversational agents and computer game characters. Computer game characters have traditionally been action-oriented - focused on the game-play - and conversational agents have been focused on sensible/intelligent conversation. While virtual humans have incorporated some form of non-verbal behaviour, this has been quite limited and more importantly not connected or connected very loosely with the behaviour of a real human interacting with the virtual human - due to a lack of sensor data and no system to respond to that data. The interactional aspect of non-verbal behaviour is highly important in human-human interactions and previous research has demonstrated that people treat media (and therefore virtual humans) as real people, and so interactive non-verbal behaviour is also important in the development of virtual humans. This paper presents the challenges in creating virtual humans that are non-verbally interactive and drawing corollaries with the development history of control systems in robotics presents some approaches to solving these challenges - specifically using behaviour based systems - and shows how an order of magnitude increase in response time of virtual humans in conversation can be obtained and that the development of rapidly responding non-verbal behaviours can start with just a few behaviours with more behaviours added without difficulty later in development
Sample of one: Indispensable or indefensible?
https://egrove.olemiss.edu/dl_proceedings/1071/thumbnail.jp
Study of the performance of disinfection with sodium hypochlorite on a full-scale sewage treatment plant
A full-scale sewage treatment plant was investigated to assess the performance of the disinfection stage. Sodium hypochlorite was used as a disinfectant agent and the process efficiency was evaluated by E.coli removal. The research took place over a period of two years in order to evaluate the effect of retention time (t) and residual chlorine (Cr) under different seasonal conditions. The effectiveness of E.coli removal with sodium hypochlorite proved to be strictly dependent on the factor CR t (product of residual chlorine with the contact time). The regression line of the experimental points was, on the whole, well comparable with the model proposed by Collins, especially in the field of CRt lower than 30 mg L-1 min
Mass accretion rates of clusters of galaxies: CIRS and HeCS
We use a new spherical accretion recipe tested on N-body simulations to
measure the observed mass accretion rate (MAR) of 129 clusters in the Cluster
Infall Regions in the Sloan Digital Sky Survey (CIRS) and in the Hectospec
Cluster Survey (HeCS). The observed clusters cover the redshift range of
and the mass range of . Based on three-dimensional mass profiles of simulated
clusters reaching beyond the virial radius, our recipe returns MARs that agree
with MARs based on merger trees. We adopt this recipe to estimate the MAR of
real clusters based on measurements of the mass profile out to .
We use the caustic method to measure the mass profiles to these large radii. We
demonstrate the validity of our estimates by applying the same approach to a
set of mock redshift surveys of a sample of 2000 simulated clusters with a
median mass of as well as a sample
of 50 simulated clusters with a median mass of : the median MARs based on the caustic mass profiles of
the simulated clusters are unbiased and agree within with the median
MARs based on the real mass profile of the clusters. The MAR of the CIRS and
HeCS clusters increases with the mass and the redshift of the accreting
cluster, which is in excellent agreement with the growth of clusters in the
CDM model.Comment: 25 pages, 19 figures, 7 table
Fe(II) and Mn(II) removal from contaminated groundwater by adsorption. A comparison of activated carbon and pine bark
This paper aims to compare the adsorption performance of activated carbon and pine bark for iron and manganese removal from contaminated groundwater. Moreover, their environmental compatibility was checked for their possible use as reactive media in a permeable reactive barrier for in situ remediation. Batch tests were carried out with different iron and manganese concentrations and different particle-size distributions, in order to evaluate the effectiveness of the activated carbon and pine bark on removal depending on both the initial pollutant concentration and the surface area of the adsorbent. High removal efficiencies were reached by both of the reactive media. However, faster removal at higher concentration was observed only for iron adsorption by activated carbon. The particle-size distribution did not significantly influence the process in the experimental conditions tested. The immobilization process on the reactive media can be considered almost irreversible since the quantities of iron and manganese released during the desorption tests were negligible
Ocean Planet or Thick Atmosphere: On the Mass-Radius Relationship for Solid Exoplanets with Massive Atmospheres
The bulk composition of an exoplanet is commonly inferred from its average
density. For small planets, however, the average density is not unique within
the range of compositions. Variations of a number of important planetary
parameters--which are difficult or impossible to constrain from measurements
alone--produce planets with the same average densities but widely varying bulk
compositions. We find that adding a gas envelope equivalent to 0.1%-10% of the
mass of a solid planet causes the radius to increase 5-60% above its gas-free
value. A planet with a given mass and radius might have substantial water ice
content (a so-called ocean planet) or alternatively a large rocky-iron core and
some H and/or He. For example, a wide variety of compositions can explain the
observed radius of GJ 436b, although all models require some H/He. We conclude
that the identification of water worlds based on the mass-radius relationship
alone is impossible unless a significant gas layer can be ruled out by other
means.Comment: 5 pages, 3 figures, accepted to Ap
From Alpine-type sulfides to nonsulfides in the Gorno Zn project (Bergamo, Italy)
Recent exploration of the Gorno Zn-Pb-Ag deposit in northern Italy identified 3.3 Mt of sulfides at 4.9% Zn, 1.3% Pb, and 27.2 g/t Ag (indicated+inferred resources), and a further mineralized nucleus of mixed sulfides-nonsulfides in the Val Vedra area, currently under evaluation. The ores are hosted in Triassic limestone and shale. Sulfides (sphalerite, Ag-bearing galena, minor pyrite, and chalcopyrite) paragenetically follow Mn-Fe-bearing saddle dolomite and sparry calcite. The mineral association, and the carbon and oxygen isotope ratios of the sparry calcite (avg. δ13C = 1.0 ± 0.6‰ V-PDB; avg. δ18O = 19.63 ± 1.25‰ V-SMOW), are in agreement with precipitation from hydrothermal fluids in a deep burial setting. Sulfide emplacement occurred before the Alpine orogeny, likely during the Early-Middle Jurassic, in analogy to other Alpine-type deposits. The nonsulfide ore formed at the expense of sulfides, and mainly consists of smithsonite, hydrozincite, hemimorphite, and cerussite. The C-O-isotope values of the early generations of Zn-carbonates are characterized by δ18O between 24.1 and 26.8‰ V-SMOW and δ13C ratios between − 3.1 and 1.7‰ V-PDB. The later generations have lower δ18O (21.9 to 23.9‰) and lower δ13C (− 6.2 to − 3.9‰). These compositions, as those measured on cerussite (δ13C = −6.3 and − 7.7‰; δ18O = 14.0 and 15.3‰), agree with the formation of the nonsulfides in a supergene environment, under climatic conditions warmer than today. The δ18O decrease from early to late generations suggests progressive involvement of meteoric water sourced from higher altitudes. These characteristics indicate that the nonsulfides formed during the exhumation of the Gorno area from Miocene to Pliocene
- …