Crystallographic orientation inhomogeneity and crystal splitting in biogenic calcite

The calcitic prismatic units forming the outer shell of the bivalve Pinctada margaritifera have been analysed using scanning electron microscopy–electron back-scatter diffraction, transmission electron microscopy and atomic force microscopy. In the initial stages of growth, the individual prismatic units are single crystals. Their crystalline orientation is not consistent but rather changes gradually during growth. The gradients in crystallographic orientation occur mainly in a direction parallel to the long axis of the prism, i.e. perpendicular to the shell surface and do not show preferential tilting along any of the calcite lattice axes. At a certain growth stage, gradients begin to spread and diverge, implying that the prismatic units split into several crystalline domains. In this way, a branched crystal, in which the ends of the branches are independent crystalline domains, is formed. At the nanometre scale, the material is composed of slightly misoriented domains, which are separated by planes approximately perpendicular to the c-axis. Orientational gradients and splitting processes are described in biocrystals for the first time and are undoubtedly related to the high content of intracrystalline organic molecules, although the way in which these act to induce the observed crystalline patterns is a matter of future research

Struktura fazowa oraz tekstura osadzonych elektrolitycznie stopów InSn na podłożu miedzianym

Stopy In-Sn są interesujące jako materiały dla technologii połączeń bezołowiowych oraz jako materiały zastępujące toksyczne warstwy kadmowe. W pracy badano warstwy indowo-cynowe osadzone z kompleksowych roztworów cytrynianowych. Kąpiele cytrynianowe są szczególnie atrakcyjne jako nietoksyczne kąpiele dla elektrolitycznego osadzania stopów. Osadzanie prowadzono w różnych warunkach hydrodynamicznych przy zastosowaniu wirującej elektrody dyskowej (WED). Stosowany potencjał, warunki hydrodynamiczne, pH, skład roztworu i dodatki składników organicznych miały silny wpływ na skład chemiczny, strukturę fazową i teksturę osadzonych warstw. Obliczono równowagi fazowe w układzie Cu-In-Sn i przedstawiono izoplety diagramu fazowego. W zakresie 25 do 400° C przeprowadzono badania termicznej stabilności osadów na podkładzie miedzianym przy zastosowaniu strukturalnej analizy rentgenowskiej.The In-Sn alloys are interesting as the materials used in the lead-free interconnection technology and as the replacement materials for toxic cadmium layers. This work investigated the indium-tin layers electrodeposited from the complex citrate solutions. The citrate electrolytic baths are especially attractive as the non-toxic baths for the electrodeposition of alloys. The depositions were conducted in various hydrodynamic conditions by means of the rotating disc electrode technique (RDE). It was observed that the applied potential, hydrodynamic conditions, pH, composition of solution and additional organic compounds have a strong effect on the chemical composition, the phase structure and the texture of the electrodeposited layers. The phase equilibria in the Cu-In-Sn ternary system were calculated and the isopleths of the phase diagram were presented. The X-ray structural investigations of the thermal stability of the deposits on the copper substrate were carried out in the temperature range from 25 to 400° C

Application of multireflection grazing incidence method for stress measurements in polished Al–Mg alloy and CrN coating

Multi-reflection grazing incidence geometry, referred to as MGIXD, characterized by a small and constant incidence angle, was applied to measure low surface stresses in very thin layers of Al–Mg alloy and CrN coating. These two materials were selected in order to deal with the low and high levels of residual stress, respectively. The influence of different mechanical treatments on residual stresses was studied for Al–Mg samples. It was found that both rolling and mechanical polishing influence the distribution and amplitude of residual stress in surface layers. In the case of CrN coating, a very high compressive stress was generated during the deposition process. The stress distributions determined by the MGIXD method is in good agreement with the classic sin2 technique results for all studied samples. In performing stress measurements for a powder sample, it was found that the application of the Göbel mirror in the incident beam strongly reduces statistical and misalignment errors. Additionally, the root mean square values of the third order lattice strain within diffracting grains were determined

Application of multireflection grazing incidence method for stress measurements in polished Al–Mg alloy and CrN coating

Multi-reflection grazing incidence geometry, referred to as MGIXD, characterized by a small and constant incidence angle, was applied to measure low surface stresses in very thin layers of Al–Mg alloy and CrN coating. These two materials were selected in order to deal with the low and high levels of residual stress, respectively. The influence of different mechanical treatments on residual stresses was studied for Al–Mg samples. It was found that both rolling and mechanical polishing influence the distribution and amplitude of residual stress in surface layers. In the case of CrN coating, a very high compressive stress was generated during the deposition process. The stress distributions determined by the MGIXD method is in good agreement with the classic sin2 technique results for all studied samples. In performing stress measurements for a powder sample, it was found that the application of the Göbel mirror in the incident beam strongly reduces statistical and misalignment errors. Additionally, the root mean square values of the third order lattice strain within diffracting grains were determined

Crystallographic control on the substructure of nacre tablets

Nacre tablets of mollusks develop two kinds of features when either the calcium carbonate or the organic portions are removed: (1) parallel lineations (vermiculations) formed by elongated carbonate rods, and (2) hourglass patterns, which appear in high relief when etched or in low relief if bleached. In untreated tablets, SEM and AFM data show that vermiculations correspond to aligned and fused aragonite nanogloblules, which are partly surrounded by thin organic pellicles. EBSD mapping of the surfaces of tablets indicates that the vermiculations are invariably parallel to the crystallographic a-axis of aragonite and that the triangles are aligned with the b-axis and correspond to the advance of the {010} faces during the growth of the tablet. According to our interpretation, the vermiculations appear because organic molecules during growth are expelled from the a-axis, where the Ca–CO3 bonds are the shortest. In this way, the subunits forming nacre merge uninterruptedly, forming chains parallel to the a-axis, whereas the organic molecules are expelled to the sides of these chains. Hourglass patterns would be produced by preferential adsorption of organic molecules along the {010}, as compared to the {100} faces. A model is presented for the nanostructure of nacre tablets. SEM and EBSD data also show the existence within the tablets of nanocrystalline units, which are twinned on {110} with the rest of the tablet. Our study shows that the growth dynamics of nacre tablets (and bioaragonite in general) results from the interaction at two different and mutually related levels: tablets and nanogranules

Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg

© 2018, The Author(s). High-pressure torsion (HPT) processing was applied to cast pure magnesium, and the effects of the deformation on the microstructure, hardness, tensile properties and corrosion resistance were evaluated. The microstructures of the processed samples were examined by electron backscatter diffraction, and the mechanical properties were determined by Vickers hardness and tensile testing. The corrosion resistance was studied using electrochemical impedance spectroscopy in a 3.5% NaCl solution. The results show that HPT processing effectively refines the grain size of Mg from millimeters in the cast structure to a few micrometers after processing and also creates a basal texture on the surface. It was found that one or five turns of HPT produced no significant difference in the grain size of the processed Mg and the hardness was a maximum after one turn due to recovery in some grains. Measurements showed that the yield strength of the cast Mg increased by about seven times whereas the corrosion resistance was not significantly affected by the HPT processing