139 research outputs found
Dynamic mechanical thermal analysis of hypromellose 2910 free films
It is common practice to coat oral solid dosage forms with polymeric materials for controlled release purposes or for practical and aesthetic reasons. Good knowledge of thermo-mechanical film properties or
their variation as a function of polymer grade, type and amount of additives or preparation method is
of prime importance in developing solid dosage forms. This work focused on the dynamic mechanical
thermal characteristics of free films of hypromellose 2910 (also known as HPMC), prepared using three
grades of this polymer from two different manufacturers, in order to assess whether polymer chain
length or origin affects the mechanical or thermo-mechanical properties of the final films. Hypromellose
free films were obtained by casting their aqueous solutions prepared at a specific concentrations in order
to obtain the same viscosity for each. The films were stored at room temperature until dried and then
examined using a dynamic mechanical analyser. The results of the frequency scans showed no significant
differences in the mechanical moduli E' and E" of the different samples when analysed at room temperature; however, the grade of the polymer affected material transitions during the heating process. Glass
transition temperature, apparent activation energy and fragility parameters depended on polymer chain
length, while the material brand showed little impact on film performance
High-Resolution Ultrasound Spectroscopy for the Determination of Phospholipid Transitions in Liposomal Dispersions
High-resolution ultrasound spectroscopy (HR-US) is a spectroscopic technique using ultrasound waves at high frequencies to investigate the structural properties of dispersed materials. This technique is able to monitor the variation of ultrasound parameters (sound speed and attenuation) due to the interaction of ultrasound waves with samples as a function of temperature and concentration. Despite being employed for the characterization of several colloidal systems, there is a lack in the literature regarding the comparison between the potential of HR-US for the determination of phospholipid thermal transitions and that of other common techniques both for loaded or unloaded liposomes. Thermal transitions of liposomes composed of pure phospholipids (dimyristoylphosphatidylcholine, DMPC; dipalmitoylphosphatidylcholine, DPPC and distearoylphosphatidylcholine, DSPC), cholesterol and their mixtures were investigated by HR-US in comparison to the most commonly employed microcalorimetry (mDSC) and dynamic light scattering (DLS). Moreover, tramadol hydrochloride, caffeine or miconazole nitrate as model drugs were loaded in DPPC liposomes to study the effect of their incorporation on thermal properties of a phospholipid bilayer. HR-US provided the determination of phospholipid sol-gel transition temperatures from both attenuation and sound speed that are comparable to those calculated by mDSC and DLS techniques for all analysed liposomal dispersions, both loaded and unloaded. Therefore, HR-US is proposed here as an alternative technique to determine the transition temperature of phospholipid membrane in liposomes
Thermosensitive self-assembling block copolymers as drug delivery systems
Self-assembling block copolymers (poloxamers, PEG/PLA and PEG/PLGA diblock and triblock copolymers, PEG/polycaprolactone, polyether modified poly(Acrylic Acid)) with large solubility difference between hydrophilic and hydrophobic moieties have the property of forming temperature dependent micellar aggregates and, after a further temperature increase, of gellifying due to micelle aggregation or packing. This property enables drugs to be mixed in the sol state at room temperature then the solution can be injected into a target tissue, forming a gel depot in-situ at body temperature with the goal of providing drug release control. The presence of micellar structures that give rise to thermoreversible gels, characterized by low toxicity and mucomimetic properties, makes this delivery system capable of solubilizing water-insoluble or poorly soluble drugs and of protecting labile molecules such as proteins and peptide drugs
An overview of natural polymers as reinforcing agents for 3D printing
Three-dimensional (3D) printing, or additive manufacturing, is a group of innovative technologies that are increasingly employed for the production of 3D objects in different fields, including pharmaceutics, engineering, agri-food and medicines. The most processed materials by 3D printing techniques (e.g., fused deposition modelling, FDM; selective laser sintering, SLS; stereolithography, SLA) are polymeric materials since they offer chemical resistance, are low cost and have easy processability. However, one main drawback of using these materials alone (e.g., polylactic acid, PLA) in the manufacturing process is related to the poor mechanical and tensile properties of the final product. To overcome these limitations, fillers can be added to the polymeric matrix during the manufacturing to act as reinforcing agents. These include inorganic or organic materials such as glass, carbon fibers, silicon, ceramic or metals. One emerging approach is the employment of natural polymers (polysaccharides and proteins) as reinforcing agents, which are extracted from plants or obtained from biomasses or agricultural/industrial wastes. The advantages of using these natural materials as fillers for 3D printing are related to their availability together with the possibility of producing printed specimens with a smaller environmental impact and higher biodegradability. Therefore, they represent a âgreen optionâ for 3D printing processing, and many studies have been published in the last year to evaluate their ability to improve the mechanical properties of 3D printed objects. The present review provides an overview of the recent literature regarding natural polymers as reinforcing agents for 3D printing
Tablet splitting in elderly patients with dementia: The case of quetiapine
Quetiapine is an atypical antipsychotic approved for treating schizophrenia, bipolar depression, and mania but is frequently used in an off-label manner to control the behavioral and psychological symptoms of dementia in elderly patients with dementia. Due to the need to personalize doses for elderly patients with dementia, quetiapine tablet manipulation is widespread in hospital settings, long-term care facilities, and patient homes. The aim of this study was to assess the impact of the different splitting techniques on quetiapine fumarate tablets by analysing the obtained sub-divided tablets and to discuss compliance with the European Pharmacopoeia limits on whole and split tablets. Quetiapine fumarate tablets of two dose strengths were taken at random (in a number able to assure a power of 0.8 during statistical comparison) and were split with a kitchen knife or tablet cutter. The weight and the drug content were determined for each half tablet. The obtained data were compared to the European Pharmacopoeia limits. The differences between the different splitting techniques were statistically tested. Data showed that split tablets, independently of the dose strength and the technique employed, were not compliant with the European Pharmacopoeia specifications for both entire and subdivided tablets in terms of weight and content uniformity. Thus, such a common practice could have potential effects on treatment efficacy and toxicity, especially when also considering the fragility of the elderly target population in which polypharmacotherapy is very common. These results indicate a compelling need for flexible quetiapine formulations that can assure more accurate dose personalization
EFFECT OF POLOXAMER 407 ON THE STABILITY AND ENZYMATIC ACTIVITY OF YEAST ALCOHOL DEHYDROGENASE.
Non disponibil
Fabrication of green nanoinsecticides from agri-waste of corn silk and its larvicidal and antibiofilm properties
he corn silk (CS) is composed of the thread- like stigmas of female inflorescences of Zea mays L. and represents an important waste material from maize crop production that can be recycled in further applications. In this research, the CS was used for the bio-fabrication of Ag nanoparticles (AgNPs) that were evaluated against (IâV) larval instars and pupae of the mosquito vector Aedes aegypti. CS-AgNPs were characterized by UV-Vis spectroscopy, TEM, EDAX, XRD, FTIR, DLS, and zeta potential analysis. Z. mays extract analyzed by gas chro- matography mass spectrometry reveals 14 compounds. The larvicidal effectiveness of CS-fabricated AgNPs was 2.35 ÎŒg·mLâ1 (I Instar) to 6.24 ÎŒg·mLâ1 (pupae). The field application in water storage reservoirs of both CS extracts and CS-AgNPs (10 Ă LC50) led to a 68â69% reduction in larval density after 72 h post-treatment. Ecotoxicological impact of CS-fabricated AgNPs was evaluated on the pre- datory efficacy of Poecilia reticulata on all the larval instars and pupae of Ae. aegypti. Finally, CS-AgNPs were tested to elucidate its anti-biofilm attributes. The CS-AgNPs at 125 ÎŒg·mLâ1 showed a biofilm inhibition of 90% on S. aureus and 79% on S. epidermidis. These results support the use of CS-AgNPs for futuristic green alternative to mosquito vector management
Hyperlipidemia control using the innovative association of lupin proteins and chitosan and α-cyclodextrin dietary fibers: food supplement formulation, molecular docking study, and in vivo evaluation
A dietary supplement potentially employed for the treatment and/or prevention of hyperlipidemia was developed. The proposed product is composed of a combination of natural macromolecules as chitosan (CH), α-cyclodextrin (α-CD), and lupin proteins (LP). First, the anti-hyperlipidemic effect of the α-CD and LP binary mixture was assessed and compared to that of the extensively utilized anti-hyperlipidemic CH, using a hyperlipidemic rat model. The anti-hyperlipidemic effect of their combination was also demonstrated. Additionally, ligandâtarget and proteinâprotein docking studies were performed. The in vivo results displayed that on intergroup comparison, blending CH, α-CD, and LP promised a superior therapeutic effect over α-CD and LP mixture, CH, and the marketed atorvastatin, potentiating a considerable reduction of serum lipid profile and the calculated atherogenic risk predictor indices. Molecular docking study revealed a weak hydrophobic cholesterolâCH and cholesterolâα-CD interactions, while proteinâprotein docking study showed a good lipaseâLP interaction, involving eight hydrogen bonds. Then, on the base of the in vivo and docking study results, a tablet formulation was produced aimed to overcome the negative technological effects of the anti-hyperlipidemic macromolecules: long disintegration time and tablets mechanical resistance. The optimized tablet formulation has a disintegration time shorter than 15 min and a weight loss from friability test lower than 1%, which are in line with the regulatory specifications for uncoated tablets. Overall, this anti-hyperlipidemic formulation is attractive for the dietary and nutraceutical market, despite further clinical studies are required to assess the efficacy, possible side effects, and product compliance
Developing a highly stable carlina acaulis essential oil nanoemulsion for managing Lobesia Botrana
The growing interest in the development of green pest management strategies is leading to the exploitation of essential oils (EOs) as promising botanical pesticides. In this respect, nanotechnology could efficiently support the use of EOs through their encapsulation into stable nanoformulations, such as nanoemulsions (NEs), to improve their stability and efficacy. This technology assures the improvement of the chemical stability, hydrophilicity, and environmental persistence of EOs, giving an added value for the fabrication of natural insecticides effective against a wide spectrum of insect vectors and pests of public and agronomical importance. Carlina acaulis (Asteraceae) root EO has been recently proposed as a promising ingredient of a new generation of botanical insecticides. In the present study, a highly stable C. acaulis-based NE was developed. Interestingly, such a nanosystem was able to encapsulate 6% (w/w) of C. acaulis EO, showing a mean diameter of around 140 nm and a SOR (surfactant-to-oil ratio) of 0.6. Its stability was evaluated in a storage period of six months and corroborated by an accelerated stability study. Therefore, the C. acaulis EO and C. acaulis-based NE were evaluated for their toxicity against 1st instar larvae of the European grapevine moth (EGVM), Lobesia botrana (Denis & SchiffermĂŒller, 1775) (Lepidoptera: Tortricidae), a major vineyard pest. The chemical composition of C. acaulis EO was investigated by gas chromatographyâmass spectrometry (GCâMS) revealing carlina oxide, a polyacetylene, as the main constituent. In toxicity assays, both the C. acaulis EO and the C. acaulis-based NE were highly toxic to L. botrana larvae, with LC50 values of 7.299 and 9.044 ”L/mL for C. acaulis EO and NE, respectively. The C. acaulis-based NE represents a promising option to develop highly stable botanical insecticides for pest management. To date, this study represents the first evidence about the insecticidal toxicity of EOs and EO-based NEs against this major grapevine pest
Developing a highly stable Carlina acaulis essential oil nanoemulsion for managing Lobesia botrana
The growing interest in the development of green pest management strategies is leading to the exploitation of essential oils (EOs) as promising botanical pesticides. In this respect, nanotechnology could efficiently support the use of EOs through their encapsulation into stable nanoformulations, such as nanoemulsions (NEs), to improve their stability and efficacy. This technology assures the improvement of the chemical stability, hydrophilicity, and environmental persistence of EOs, giving an added value for the fabrication of natural insecticides effective against a wide spectrum of insect vectors and pests of public and agronomical importance. Carlina acaulis (Asteraceae) root EO has been recently proposed as a promising ingredient of a new generation of botanical insecticides. In the present study, a highly stable C. acaulis-based NE was developed. Interestingly, such a nanosystem was able to encapsulate 6% (w/w) of C. acaulis EO, showing a mean diameter of around 140 nm and a SOR (surfactant-to-oil ratio) of 0.6. Its stability was evaluated in a storage period of six months and corroborated by an accelerated stability study. Therefore, the C. acaulis EO and C. acaulis-based NE were evaluated for their toxicity against 1st instar larvae of the European grapevine moth (EGVM), Lobesia botrana (Denis & SchiffermĂŒller, 1775) (Lepidoptera: Tortricidae), a major vineyard pest. The chemical composition of C. acaulis EO was investigated by gas chromatographyâmass spectrometry (GCâMS) revealing carlina oxide, a polyacetylene, as the main constituent. In toxicity assays, both the C. acaulis EO and the C. acaulis-based NE were highly toxic to L. botrana larvae, with LC50 values of 7.299 and 9.044 ”L/mL for C. acaulis EO and NE, respectively. The C. acaulis-based NE represents a promising option to develop highly stable botanical insecticides for pest management. To date, this study represents the first evidence about the insecticidal toxicity of EOs and EO-based NEs against this major grapevine pest
- âŠ