Temperature-dependent rheological and viscoelastic investigation of a poly(2-methyl-2oxazoline)-b-poly(2-iso-butyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline)-based thermogelling hydrogel

The synthesis and characterization of an ABA triblock copolymer based on hydrophilic poly(2-methyl-2-oxazoline) (pMeOx) blocks A and a modestly hydrophobic poly(2-iso-butyl-2-oxazoline) (piBuOx) block B is described. Aqueous polymer solutions were prepared at different concentrations (1–20 wt %) and their thermogelling capability using visual observation was investigated at different temperatures ranging from 5 to 80 ◦C. As only a 20 wt % solution was found to undergo thermogelation, this concentration was investigated in more detail regarding its temperature-dependent viscoelastic profile utilizing various modes (strain or temperature sweep). The prepared hydrogels from this particular ABA triblock copolymer have interesting rheological and viscoelastic properties, such as reversible thermogelling and shear thinning, and may be used as bioink, which was supported by its very low cytotoxicity and initial printing experiments using the hydrogels. However, the soft character and low yield stress of the gels do not allow real 3D printing at this point. © 2019 by the authors.Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)German Research Foundation (DFG) [326998133-TRR 225, 398461692]; Evonik Foundation; Ministry of Education, Youth and Sports of the Czech Republic-program NPU I [LO1504]; Deutsche Forschungsgemeinschaft within the DFG State Major Instrumentation ProgrammeGerman Research Foundation (DFG) [INST 105022/58-1 FUGG

Biologisch-inspirierte Modifizierung und Funktionalisierung von Hydrogelen für Anwendungen in der Biomedizin

Over the years, hydrogels have been developed and used for a huge variety of different applications ranging from drug delivery devices to medical products. In this thesis, a poly(2-methyl-2-oxazoline) (POx) / poly(2-n-propyl-2-oxazine) (POzi) bioink was modified and analyzed for the use in biofabrication and targeted drug delivery. In addition, the protein fibrinogen (Fbg) was genetically modified for an increased stability towards plasmin degradation for its use as wound sealant. In Chapter 1, a thermogelling, printable POx/POzi-based hydrogel was modified with furan and maleimide moieties in the hydrophilic polymer backbone facilitating post-printing maturation of the constructs via Diels-Alder chemistry. The modification enabled long-term stability of the hydrogel scaffolds in aqueous solutions which is necessary for applications in biofabrication or tissue engineering. Furthermore, we incorporated RGD-peptides into the hydrogel which led to cell adhesion and elongated morphology of fibroblast cells seeded on top of the scaffolds. Additional printing experiments demonstrate that the presented POx/POzi system is a promising platform for the use as a bioink in biofabrication. Chapter 2 highlights the versatility of the POx/POzi hydrogels by adapting the system to a use in targeted drug delivery. We used a bioinspired approach for a bioorthogonal conjugation of insulin-like growth factor I (IGF-I) to the polymer using an omega-chain-end dibenzocyclooctyne (DBCO) modification and a matrix metalloprotease-sensitive peptide linker. This approach enabled a bioresponsive release of IGF-I from hydrogels as well as spatial control over the protein distribution in 3D printed constructs which makes the system a candidate for the use in personalized medicine. Chapter 3 gives a general overview over the necessity of wound sealants and the current generations of fibrin sealants on the market including advantages and challenges. Furthermore, it highlights trends and potential new strategies to tackle current problems and broadens the toolbox for future generations of fibrin sealants. Chapter 4 applies the concepts of recombinant protein expression and molecular engineering to a novel generation of fibrin sealants. In a proof-of-concept study, we developed a new recombinant fibrinogen (rFbg) expression protocol and a Fbg mutant that is less susceptible to plasmin degradation. Targeted lysine of plasmin cleavage sites in Fbg were exchanged with alanine or histidine in different parts of the molecule. The protein was recombinantly produced and restricted plasmin digest was analyzed using high resolution mass spectrometry. In addition to that, we developed a novel time resolved screening protocol for the detection of new potential plasmin cleavage sites for further amino acid exchanges in the fibrin sealant.Hydrogele wurden im Laufe der Jahre für eine Vielzahl von Anwendungen, von der Verabreichung von Medikamenten bis hin zu medizinischen Produkten, entwickelt und eingesetzt. In dieser Arbeit wurde eine Poly(2-methyl-2-oxazolin) POx) / Poly(2-n-propyl-2- oxazin) (POzi) Biotinte modifiziert und für den Einsatz in der Biofabrikation und für die gezielte Verabreichung von Medikamenten analysiert. Außerdem wurde das Protein Fibrinogen (Fbg) gentechnisch verändert, um seine Stabilität gegenüber dem Plasminabbau in seiner Funktion als Wundkleber zu erhöhen In Kapitel 1 wurde ein thermogelierendes, druckbares Hydrogel auf POx/POzi-Basis mit Furan- und Maleimid-Funktionen im hydrophilen Polymerrückgrat modifiziert, was die Reifung der Konstrukte nach dem Druck durch Diels-Alder-Chemie bewirkt. Die Modifizierung ermöglichte eine langfristige Stabilität der Hydrogele in wässrigen Lösungen, was für Anwendungen im Bereich der Biofabrikation oder im Tissue Engineering erforderlich ist. Darüber hinaus haben wir RGD-Peptide in das Hydrogel integriert, was zur Zelladhäsion und einer verlängerten Morphologie von Fibroblasten, die auf den Gelen ausgesät wurden, führte. Weitere Druckexperimente zeigen außerdem, dass das POx/POzi-System eine vielversprechende Plattform für den Einsatz als Biotinte in der Biofabrikation ist. Kapitel 2 unterstreicht die Vielseitigkeit der POx/POzi-Hydrogele, indem das System für die gezielte Abgabe von Medikamenten angepasst wird. Wir verwendeten einen von der Natur inspirierten Ansatz für eine biorthogonale Konjugation vom Insuline-like Growth Factor I (IGF- I) an das Polymer unter Verwendung einer Dibenzocyclooctin-Modifikation des Polymers am Ende der Omega-Kette und eines Matrix-Metalloproteasen-empfindlichen Peptid-Linkers. Dieser Ansatz ermöglichte eine bioresponsive Freisetzung von IGF-I aus Hydrogelen sowie eine räumliche Kontrolle über die Proteinverteilung in 3D-gedruckten Konstrukten, was das System zu einem Kandidaten für den Einsatz in der personalisierten Medizin macht. Kapitel 3 gibt einen allgemeinen Überblick über die Notwendigkeit von Wundversiegelungsmitteln und die derzeit auf dem Markt befindlichen Generationen von Fibrinklebern einschließlich der Vorteile und Herausforderungen. Darüber hinaus werden Trends und potenzielle neue Strategien zur Lösung aktueller Probleme und zur Erweiterung der Toolbox für künftige Generationen von Fibrinklebern aufgezeigt. In Kapitel 4 werden die Konzepte der rekombinanten Proteinexpression und des Molecular Engineering auf eine neue Generation von Fibrin Wundklebern angewandt. In einer Proof-of- Concept-Studie haben wir ein neues rekombinantes Fbg Expressionsprotokoll und eine Fbg Mutante entwickelt, die weniger anfällig für einen Abbau durch Plasmin ist. Gezielte Lysine in Plasmin-Schnittstellen in Fbg wurde entweder durch Alanin oder Histidin in unterschiedlichen Teilen des Moleküls ausgetauscht. Das Protein wurde rekombinant hergestellt und eine verminderte Schnittrate wurde mittels hochauflösender Massenspektrometrie gezeigt. Zusätzlich haben wir ein neues zeitaufgelöstes Screening-Protokoll entwickelt, mit dem sich neue potenzielle Plasmin-Spaltstellen für weitere Aminosäurenaustausche in Fibrin-Klebern auflösen lassen

Inverse Thermogelation of Aqueous Triblock Copolymer Solutions into Macroporous Shear-Thinning 3D Printable Inks

Amphiphilic block copolymers that undergo (reversible) physical gelation in aqueous media are of great interest in different areas including drug delivery, tissue engineering, regenerative medicine and biofabrication. We investigated a small library of ABA-type triblock copolymers comprising poly(2-methyl-2-oxazoline) as the hydrophilic shell A and different aromatic poly(2-oxazoline)s and poly(2-oxazine)s cores B in aqueous solution at different concentrations and temperatures. Interestingly, aqueous solutions of poly(2-methyl-2-oxazoline)-block-poly(2-phenyl-2-oxazine)-block-poly(2-methyl-2-oxazoline) (PMeOx-b-PPheOzi-b-PMeOx) undergo inverse thermogelation below a critical temperature. The viscoelastic properties of the resulting gel can be conveniently tailored by the concentration and the polymer composition. Storage moduli of up to 110 kPa could be obtained while the material remains shear-thinning and retains rapid self-healing properties. We demonstrate 3D-printing of excellently defined and shape persistent 24-layered scaffolds at different aqueous concentrations to highlight its application potential e.g. in the research area of biofabrication. A mesoporous microstructure, which is stable throughout the printing process, could be confirmed via cryo-SEM analysis. The absence of cytotoxicity even at very high concentrations opens wide range of different applications for this first-in-class material in the field of biomaterials.<br /

Inverse Thermogelation of Aqueous Triblock Copolymer Solutions into Macroporous Shear-Thinning 3D Printable Inks

Amphiphilic block copolymers that undergo (reversible) physical gelation in aqueous media are of great interest in ditIerent areas including drug delivery, tissue engineering, regenerative medicine, and biofabrication. We investigated a small library of ABA-type triblock copolymers comprising poly(2-methyl-2-oxazoline) as the hydrophilic shell A and different aromatic poly(2-oxazoline)s and poly(2-oxazine)s cores B in an aqueous solution at different concentrations and temperatures. Interestingly, aqueous solutions of poly(2-methyl-2-oxazoline)-block-poly(2-phenyl-2-oxazine)-block-poly(2-methyl-2-oxazoline) (PMeOx-b-PPheOzi-b-PMeOx) undergo inverse thermogelation below a critical temperature by forming a reversible nanoscale wormlike network. The viscoelastic properties of the resulting gel can be conveniently tailored by the concentration and the polymer composition. Storage moduli of up to 110 kPa could be obtained while the material retains shear-thinning and rapid self-healing properties. We demonstrate three-dimensional (3D) printing of excellently defined and shape-persistent 24-layered scaffolds at different aqueous concentrations to highlight its application potential, e.g., in the research area of biofabrication. A macroporous microstructure, which is stable throughout the printing process, could be confirmed via cryo-scanning electron microscopy (SEM) analysis. The absence of cytotoxicity even at very high concentrations opens a wide range of different applications for this first-in-class material in the field of biomaterials.Peer reviewe

Freeform direct laser writing of versatile topological 3D scaffolds enabled by intrinsic support hydrogel

In this study, a novel approach to create arbitrarily shaped 3D hydrogel objects is presented, wherein freeform two-photon polymerization (2PP) is enabled by the combination of a photosensitive hydrogel and an intrinsic support matrix. This way, topologies without physical contact such as a highly porous 3D network of concatenated rings were realized, which are impossible to manufacture with most current 3D printing technologies. Micro-Raman and nanoindentation measurements show the possibility to control water uptake and hence tailor the Young's modulus of the structures via the light dosage, proving the versatility of the concept regarding many scaffold characteristics that makes it well suited for cell specific cell culture as demonstrated by cultivation of human induced pluripotent stem cell derived cardiomyocytes.Peer reviewe

Temperature-Dependent Rheological and Viscoelastic Investigation of a Poly(2-methyl-2-oxazoline)-b-poly(2-iso-butyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline)-Based Thermogelling Hydrogel

The synthesis and characterization of an ABA triblock copolymer based on hydrophilic poly(2-methyl-2-oxazoline) (pMeOx) blocks A and a modestly hydrophobic poly(2-iso-butyl-2-oxazoline) (piBuOx) block B is described. Aqueous polymer solutions were prepared at different concentrations (1&ndash;20 wt %) and their thermogelling capability using visual observation was investigated at different temperatures ranging from 5 to 80 &deg;C. As only a 20 wt % solution was found to undergo thermogelation, this concentration was investigated in more detail regarding its temperature-dependent viscoelastic profile utilizing various modes (strain or temperature sweep). The prepared hydrogels from this particular ABA triblock copolymer have interesting rheological and viscoelastic properties, such as reversible thermogelling and shear thinning, and may be used as bioink, which was supported by its very low cytotoxicity and initial printing experiments using the hydrogels. However, the soft character and low yield stress of the gels do not allow real 3D printing at this point

From Thermogelling Hydrogels toward Functional Bioinks : Controlled Modification and Cytocompatible Crosslinking

Hydrogels are key components in bioink formulations to ensure printability and stability in biofabrication. In this study, a well-known Diels-Alder two-step post-polymerization modification approach is introduced into thermogelling diblock copolymers, comprising poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine). The diblock copolymers are partially hydrolyzed and subsequently modified by acid/amine coupling with furan and maleimide moieties. While the thermogelling and shear-thinning properties allow excellent printability, trigger-less cell-friendly Diels-Alder click-chemistry yields long-term shape-fidelity. The introduced platform enables easy incorporation of cell-binding moieties (RGD-peptide) for cellular interaction. The hydrogel is functionalized with RGD-peptides using thiol-maleimide chemistry and cell proliferation as well as morphology of fibroblasts seeded on top of the hydrogels confirm the cell adhesion facilitated by the peptides. Finally, bioink formulations are tested for biocompatibility by incorporating fibroblasts homogenously inside the polymer solution pre-printing. After the printing and crosslinking process good cytocompatibility is confirmed. The established bioink system combines a two-step approach by physical precursor gelation followed by an additional chemical stabilization, offering a broad versatility for further biomechanical adaptation or bioresponsive peptide modification.Peer reviewe

Merging bioresponsive release of insulin-like growth factor I with 3D printable thermogelling hydrogels

3D printing of biomaterials enables spatial control of drug incorporation during automated manufacturing. This study links bioresponsive release of the anabolic biologic, insulin-like growth factor-I (IGF-I) in response to matrix metalloproteinases (MMP) to 3D printing using the block copolymer of poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine) (POx-b-POzi). For that, a chemo-enzymatic synthesis was deployed, ligating IGF-I enzymatically to a protease sensitive linker (PSL), which was conjugated to a POx-b-POzi copolymer. The product was blended with the plain thermogelling POx-b-POzi hydrogel. MMP exposure of the resulting hydrogel triggered bioactive IGF-I release. The bioresponsive IGF-I containing POx-b-POzi hydrogel system was further detailed for shape control and localized incorporation of IGF-I via extrusion 3D printing for future applications in biomedicine and biofabrication

Biomechanical and Biological Performances of Diels-Alder Crosslinked Thermogelling Bioink

Hydrogels are key components in bioink formulations to ensure printability and stability in biofabrication. In this study a well-known post-polymerization modification approach is introduced into thermogelling diblock copolymers, comprising poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine). While the thermogelling and shear-thinning properties allow excellent printability, trigger-less cell-friendly Diels-Alder click-chemistry yields long-term shape-fidelity. The introduced platform enables easy incorporation of cell-binding moieties (RGD-peptide) for cellular interaction. The hydrogel was functionalized with RGD-peptides using thiol-maleimide chemistry and growth as well as morphology of fibroblast seeded on top of the hydrogels confirmed the cell adhesion facilitated by the peptides. Finally, bioink formulations were tested for biocompatibility by incorporating fibroblasts homogenously inside polymer solution pre-printing and exhibited good cytocompatibility after the printing process and crosslinking. The established bioink system combining a two-step approach by physical precursor gelation followed by additional chemical stabilization offers a broad versatility for further biomechanical adaptation or bioresponsive peptide modification

Merging bioresponsive release of insulin-like growth factor I with 3D printable thermogelling hydrogels

3D printing of biomaterials enables spatial control of drug incorporation during automated manufacturing. This study links bioresponsive release of the anabolic biologic, insulin-like growth factor-I (IGF-I) in response to matrix metalloproteinases (MMP) to 3D printing using the block copolymer of poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine) (POx-b-POzi). For that, a chemo-enzymatic synthesis was deployed, ligating IGF-I enzymatically to a protease sensitive linker (PSL), which was conjugated to a POx-b-POzi copolymer. The product was blended with the plain thermogelling POx-b-POzi hydrogel. MMP exposure of the resulting hydrogel triggered bioactive IGF-I release. The bioresponsive IGF-I containing POx-b-POzi hydrogel system was further detailed for shape control and localized incorporation of IGF-I via extrusion 3D printing for future applications in biomedicine and biofabrication.Peer reviewe