Mechanical properties and formability of en AW-7075 in cold forming processes

Due to a low density and high tensile strength, the aluminum alloy EN AW 7075 T6 offers a high lightweight potential for structural components. Since its formability is limited at room temperature in the T6 temper state, the potential of this alloy for automotive bodies is only utilizable by adapted deep drawing processes. In recent years, process chains suited for warm and hot forming have been researched and developed. However, warm and hot forming solutions require additional process steps and a complex tooling system in comparison to cold forming processes. Alternatively, the forming of such blanks at room temperature in the W temper state is favorable since conventional tools can be used. The W temper state is a heat treatment condition achieved after solution heat treatment and subsequent quenching, which is characterized by an increased ductility. However, this condition is unstable, due to the onset of natural ageing. With increasing time after the quenching step, the strength of the material increases, which leads to a reduction of formability. Another phenomenon that occurs after quenching is the Portevin Le-Chatelier effect. This effect causes the formation of flow lines during cold forming and results in a decrease of ductility. Hence, the objective of the investigations was to determine the formability of EN AW 7075 as a function of the natural ageing time after solution heat treatment and quenching. Therefore, tensile tests of various aged samples were carried out. The results show a relation of the formability to the natural ageing time and a dependency on the quenching rate. Furthermore, a heat treatment strategy for EN AW-7075 was developed, that considers manufacturing processes like the cathodic dip coating. The influence of the quenching rate, ageing time and temperature as well as the influence of temperature of the paint baking process after the cathodic dip coating were considered. Therefore, a design of experiments and tensile tests were carried out. Thus, the deep drawing of EN AW-7075 at room temperature is particularly promoted. © 2020 Published under licence by IOP Publishing Ltd

Increased levels of anti-glycan antibodies in patients with cystic fibrosis

<p>Abstract</p> <p>Background</p> <p>The prevalence of Crohn's disease (CD) is increased in patients with cystic fibrosis (CF). Anti-Saccharomyces cerevisiae antibodies (ASCA) have been suggested as a screening tool to detect CD in CF. Recently, several new anti-glycan antibodies have been reported in CD.</p> <p>Materials and methods</p> <p>The sera of 119 CF patients of various age groups were prospectively screened for ASCA type IgG (gASCA), anti-laminaribioside carbohydrate IgG antibodies (ALCA), anti-chitobioside carbohydrate IgA antibodies (ACCA), and anti-mannobioside carbohydrate IgG antibodies (AMCA). The frequency of these anti-glycan antibodies was then compared in patients with CD, ulcerative colitis, rheumatoid arthritis and healthy volunteers.</p> <p>Results</p> <p>A significant number of CF patients were positive for gASCA (51.3% [41.6-60.6]) and up to three other anti-glycan antibodies concurrently. Serum levels of anti-glycan antibodies in CF and CD were not related to parameters of inflammation. Despite the well-documented difference in clinical course between male and female CF patients no gender difference of anti-glycan antibodies was found. In contrast, there was a significant positive correlation between anti-glycan markers and age in CF patients.</p> <p>Conclusions</p> <p>Our findings demonstrate for the first time the increased frequency of a panel of anti-glycan antibodies in CF and provide a link between the presence of these serological biomarkers and patient's age. Anti-glycan antibody profiling may therefore become a valuable tool in the care of patients with CF.</p

A pulsed, mono-energetic and angular-selective UV photo-electron source for the commissioning of the KATRIN experiment

The KATRIN experiment aims to determine the neutrino mass scale with a sensitivity of 200 meV/c^2 (90% C.L.) by a precision measurement of the shape of the tritium $\beta$-spectrum in the endpoint region. The energy analysis of the decay electrons is achieved by a MAC-E filter spectrometer. To determine the transmission properties of the KATRIN main spectrometer, a mono-energetic and angular-selective electron source has been developed. In preparation for the second commissioning phase of the main spectrometer, a measurement phase was carried out at the KATRIN monitor spectrometer where the device was operated in a MAC-E filter setup for testing. The results of these measurements are compared with simulations using the particle-tracking software "Kassiopeia", which was developed in the KATRIN collaboration over recent years.Comment: 19 pages, 16 figures, submitted to European Physical Journal

Finite-Difference Time-Domain Simulation for Three-dimensional Polarized Light Imaging

Three-dimensional Polarized Light Imaging (3D-PLI) is a promising technique to reconstruct the nerve fiber architecture of human post-mortem brains from birefringence measurements of histological brain sections with micrometer resolution. To better understand how the reconstructed fiber orientations are related to the underlying fiber structure, numerical simulations are employed. Here, we present two complementary simulation approaches that reproduce the entire 3D-PLI analysis: First, we give a short review on a simulation approach that uses the Jones matrix calculus to model the birefringent myelin sheaths. Afterwards, we introduce a more sophisticated simulation tool: a 3D Maxwell solver based on a Finite-Difference Time-Domain algorithm that simulates the propagation of the electromagnetic light wave through the brain tissue. We demonstrate that the Maxwell solver is a valuable tool to better understand the interaction of polarized light with brain tissue and to enhance the accuracy of the fiber orientations extracted by 3D-PLI.Comment: 13 pages, 5 figure

Fuzzy Fibers: Uncertainty in dMRI Tractography

Fiber tracking based on diffusion weighted Magnetic Resonance Imaging (dMRI) allows for noninvasive reconstruction of fiber bundles in the human brain. In this chapter, we discuss sources of error and uncertainty in this technique, and review strategies that afford a more reliable interpretation of the results. This includes methods for computing and rendering probabilistic tractograms, which estimate precision in the face of measurement noise and artifacts. However, we also address aspects that have received less attention so far, such as model selection, partial voluming, and the impact of parameters, both in preprocessing and in fiber tracking itself. We conclude by giving impulses for future research

First Results on In-Beam gamma Spectroscopy of Neutron-Rich Na and Mg Isotopes at REX-ISOLDE

After the successful commissioning of the radioactive beam experiment at ISOLDE (REX-ISOLDE) - an accelerator for exotic nuclei produced by ISOLDE - first physics experiments using these beams were performed. Initial experiments focused on the region of deformation in the vicinity of the neutron-rich Na and Mg isotopes. Preliminary results show the high potential and physics opportunities offered by the exotic isotope accelerator REX in conjunction with the modern Germanium gamma spectrometer MINIBALL.Comment: 7 pages, RNB6 conference contributio

Positron-neutrino correlation in the 0^+ \to 0^+ decay of ^{32}Ar

The positron-neutrino correlation in the $0^+ \to 0^+ \beta$ decay of $^{32}$Ar was measured at ISOLDE by analyzing the effect of lepton recoil on the shape of the narrow proton group following the superallowed decay. Our result is consistent with the Standard Model prediction. For vanishing Fierz interference we find $a=0.9989 \pm 0.0052 \pm 0.0036$, which yields improved constraints on scalar weak interactions

"Safe" Coulomb Excitation of 30Mg

We report on the first radioactive beam experiment performed at the recently commissioned REX-ISOLDE facility at CERN in conjunction with the highly efficient gamma spectrometer MINIBALL. Using 30Mg ions accelerated to an energy of 2.25 MeV/u together with a thin nat-Ni target, Coulomb excitation of the first excited 2+ states of the projectile and target nuclei well below the Coulomb barrier was observed. From the measured relative de-excitation gamma ray yields the B(E2; 0+ -> 2+) value of 30Mg was determined to be 241(31) e2fm4. Our result is lower than values obtained at projectile fragmentation facilities using the intermediate-energy Coulomb excitation method, and confirms the theoretical conjecture that the neutron-rich magnesium isotope 30Mg lies still outside the ``island of inversion''

Conditioning of BWR Control - Elements Using the New MOSAIK 80T/SWR-SE Cask - Concept

During the operation of Boiling Water Reactors, Control - Elements are used to control the neutron flux inside the reactor vessel. After the end of the lifetime, the Control - Elements are usually stored in the fuel - elements - pool of the reactor. Up to now, in Germany no conditioning of Control - Elements has been done in a BWR under operation

Amplified surface warming in the south-west Pacific during the mid-Pliocene (3.3–3.0 Ma) and future implications

Based on Nationally Determined Contributions concurrent with Shared Socioeconomic Pathways (SSPs) 2-4.5, the IPCC predicts global warming of 2.1–3.5 ∘C (very likely range 10–90th percentile) by 2100 CE. However, global average temperature is a poor indicator of regional warming and global climate models (GCMs) require validation with instrumental or proxy data from geological archives to assess their ability to simulate regional ocean and atmospheric circulation, and thus, to evaluate their performance for regional climate projections. The south-west Pacific is a region that performs poorly when GCMs are evaluated against instrumental observations. The New Zealand Earth System Model (NZESM) was developed from the United Kingdom Earth System Model (UKESM) to better understand south-west Pacific response to global change, by including a nested ocean grid in the south-west Pacific with 80 % greater horizontal resolution than the global-scale host.Here, we reconstruct regional south-west Pacific sea-surface temperatures (SSTs) for the mid-Pliocene warm period (mPWP; 3.3–3.0 Ma), which has been widely considered a past analogue with an equilibrium surface temperature response of +3 ∘C to an atmospheric CO2 concentration of ∼350–400 ppm, in order to assess the warming distribution in the south-west Pacific. This study presents proxy SSTs from seven deep sea sediment cores distributed across the south-west Pacific. Our reconstructed SSTs are derived from molecular biomarkers preserved in the sediment – alkenones (i.e. U index) and isoprenoid glycerol dialkyl glycerol tetraethers (i.e. TEX86 index) – and are compared with SSTs reconstructed from the Last Interglacial (125 ka), Pliocene Model Intercomparison Project (PlioMIP) outputs and transient climate model projections (NZESM and UKESM) of low- to high-range SSPs for 2090–2099 CE.Mean interglacial equilibrium SSTs during the mPWP for the south-west Pacific sites were on average 4.2 ∘C (1.8–6.1 ∘C likely range) above pre-industrial temperatures and show good agreement with model outputs from NZESM and UKESM under mid-range SSP 2–4.6 conditions. These results highlight that not only is the mPWP an appropriate analogue when considering future temperature change in the centuries to come, but they also demonstrate that the south-west Pacific region will experience warming that exceeds that of the global mean if atmospheric CO2 remains above 350 ppm