Mechanical Metamaterials with Negative Compressibility Transitions

When tensioned, ordinary materials expand along the direction of the applied force. Here, we explore network concepts to design metamaterials exhibiting negative compressibility transitions, during which a material undergoes contraction when tensioned (or expansion when pressured). Continuous contraction of a material in the same direction of an applied tension, and in response to this tension, is inherently unstable. The conceptually similar effect we demonstrate can be achieved, however, through destabilisations of (meta)stable equilibria of the constituents. These destabilisations give rise to a stress-induced solid-solid phase transition associated with a twisted hysteresis curve for the stress-strain relationship. The strain-driven counterpart of negative compressibility transitions is a force amplification phenomenon, where an increase in deformation induces a discontinuous increase in response force. We suggest that the proposed materials could be useful for the design of actuators, force amplifiers, micro-mechanical controls, and protective devices.Comment: Supplementary information available at http://www.nature.com/nmat/journal/v11/n7/abs/nmat3331.htm

Carbon nanotube four-terminal devices for pressure sensing applications

Carbon nanotubes (CNTs) are of high interest for sensing applications,owing to their superior mechanical strength, high Young’s modulus and low density. In this work, we report on a facile approach for the fabrication of carbon nanotube devices using a four terminal configuration. Oriented carbon nanotube films were pulled out from a CNT forest wafer and then twisted into a yarn. Both the CNT film and yarn were arranged on elastomer membranes/diaphragms which were arranged on a laser cut acrylic frame to form pressure sensors. The sensors were calibrated using a precisely controlled pressure system, showing a large change of the output voltage of approximately 50 mV at a constant supply current of 100 μA and under a low applied pressure of 15 mbar. The results indicate the high potential of using CNT films and yarns for pressure sensing applications

Elastomeric spring actuator using nylon wires

Medical devices are designed for collaboration with the human body, which makes the steps to create them increasingly more complex if the device is to be implanted. Soft robots have the unique potential of meeting both the mechanical compliance with the interacting tissues and the controlled functionality needed for a repair or replacement. Soft devices that fulfill fundamental mechanical roles are needed as parts of soft robots in order to carry out desired tasks. As the medical devices become increasingly low-profile, soft devices must feature multi-functionality that is embedded in the structure. A device embedded with nylon actuators allows for the controlled collapsing of an elastomeric spring by compression alone or compression and twisting. In this paper we present the concept of a novel elastomeric spring, its fabrication and mechanical characterization

Modeling the auxetic transition for carbon nanotube sheets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)A simple model is developed to predict the complex mechanical properties of carbon nanotube sheets (buckypaper) [L. J. Hall et al., Science 320, 504 (2008)]. Fabricated using a similar method to that deployed for making writing paper, these buckypapers can have in-plane Poisson's ratios changed from positive to negative, becoming auxetic, as multiwalled carbon nanotubes are increasingly mixed with single-walled carbon nanotubes. Essential structural features of the buckypapers are incorporated into the model: isotropic in-plane mechanical properties, nanotubes preferentially oriented in the sheet plane, and freedom to undergo stress-induced elongation by both angle and length changes. The expressions derived for the Poisson's ratios enabled quantitative prediction of both observed properties and remarkable new properties obtainable by structural modification.7811National Science Foundation [DMI-0609115]Air Force Office of Scientific Research [FA9550-05-C-0088]Lintec CorporationFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)National Science Foundation [DMI-0609115]Air Force Office of Scientific Research [FA9550-05-C-0088

Understanding the nature of "superhard graphite"

Numerous experiments showed that on cold compression graphite transforms into a new superhard and transparent allotrope. Several structures with different topologies have been proposed for this phase. While experimental data are consistent with these models, the only way to solve this puzzle is to find which structure is kinetically easiest to form. Using state-of-the-art molecular-dynamics transition path sampling simulations, we investigate kinetic pathways of the pressure-induced transformation of graphite to various superhard candidate structures. Unlike hitherto applied methods for elucidating nature of superhard graphite, transition path sampling realistically models nucleation events necessary for physically meaningful transformation kinetics. We demonstrate that nucleation mechanism and kinetics lead to $M$-carbon as the final product. $W$-carbon, initially competitor to $M$-carbon, is ruled out by phase growth. Bct-C$_4$ structure is not expected to be produced by cold compression due to less probable nucleation and higher barrier of formation

Considerable Enhancement of Field Emission of SnO2Nanowires by Post-Annealing Process in Oxygen at High Temperature

The field emission properties of SnO2nanowires fabricated by chemical vapor deposition with metallic catalyst-assistance were investigated. For the as-fabricated SnO2nanowires, the turn-on and threshold field were 4.03 and 5.4 V/μm, respectively. Considerable enhancement of field emission of SnO2nanowires was obtained by a post-annealing process in oxygen at high temperature. When the SnO2nanowires were post-annealed at 1,000 °C in oxygen, the turn-on and threshold field were decreased to 3.77 and 4.4 V/μm, respectively, and the current density was increased to 6.58 from 0.3 mA/cm2at the same applied electric field of 5.0 V/μm

Recent ASA presidents and ‘top’ journals: observed publication patterns, alleged cartels and varying careers

It has been common for studies presented as about American sociology as a whole to rely on data compiled from leading journals (American Sociological Review [ASR] and American Journal of Sociology [AJS]), or about presidents of the American Sociological Association [ASA], to represent it. Clearly those are important, but neither can be regarded as providing a representative sample of American sociology. Recently, Stephen Turner has suggested that dominance in the ASA rests with a ‘cartel’ initially formed in graduate school, and that it favors work in a style associated with the leading journals. The adequacy of these ideas is examined in the light of available data on the last 20 years, which show that very few of the presidents were in the same graduate schools at the same time. All presidents have had distinguished academic records, but it is shown that their publication strategies have varied considerably. Some have had no ASR publications except their presidential addresses, while books and large numbers of other journals not normally mentioned in this context have figured in their contributions, as well as being more prominent in citations. It seems clear that articles in the leading journals have not been as closely tied to prestigious careers as has sometimes been suggested, and that if there is a cartel it has not included all the presidents

Loss of Proliferation and Antigen Presentation Activity following Internalization of Polydispersed Carbon Nanotubes by Primary Lung Epithelial Cells

Interactions between poly-dispersed acid functionalized single walled carbon nanotubes (AF-SWCNTs) and primary lung epithelial (PLE) cells were studied. Peritoneal macrophages (PMs, known phagocytic cells) were used as positive controls in this study. Recovery of live cells from cultures of PLE cells and PMs was significantly reduced in the presence of AF-SWCNTs, in a time and dose dependent manner. Both PLE cells as well as PMs could take up fluorescence tagged AF-SWCNTs in a time dependent manner and this uptake was significantly blocked by cytochalasin D, an agent that blocks the activity of acto-myosin fibers and therefore the phagocytic activity of cells. Confocal microscopic studies confirmed that AF-SWCNTs were internalized by both PLE cells and PMs. Intra-trachially instilled AF-SWCNTs could also be taken up by lung epithelial cells as well as alveolar macrophages. Freshly isolated PLE cells had significant cell division activity and cell cycling studies indicated that treatment with AF-SWCNTs resulted in a marked reduction in S-phase of the cell cycle. In a previously standardized system to study BCG antigen presentation by PLE cells and PMs to sensitized T helper cells, AF-SWCNTs could significantly lower the antigen presentation ability of both cell types. These results show that mouse primary lung epithelial cells can efficiently internalize AF-SWCNTs and the uptake of nanotubes interfered with biological functions of PLE cells including their ability to present BCG antigens to sensitized T helper cells

Femtosecond Dynamics in Single Wall Carbon Nanotube/Poly(3-Hexylthiophene) Composites

Femtosecond transient absorption measurements on single wall carbon nanotube/poly(3-hexylthiophene) composites are used to investigate the relaxation dynamics of this blended material. The influence of the addition of nanotubes in polymer matrix on the ultrashort relaxation dynamics is examined in detail. The introduction of nanotube/polymer heterojunctions enhances the exciton dissociation and quenches the radiative recombination of composites. The relaxation dynamics of these composites are compared with the fullerene derivative-polymer composites with the same matrix. These results provide explanation to the observed photovoltaic performance of two types of composites

Facile Fabrication of Uniform Polyaniline Nanotubes with Tubular Aluminosilicates as Templates

The uniform polyaniline (PANI) nanotubes, with inner diameter, outer diameter, and tubular thickness of 40, 60, and 10 nm, respectively, were prepared successfully by using natural tubular aluminosilicates as templates. The halloysite nanotubes were coated with PANI via the in situ chemical oxidation polymerization. Then the templates were etched with HCl/HF solution. The PANI nanotubes were characterized using FTIR, X-ray diffraction, and transmission electron microscopy. The conductivity of the PANI nanotubes was found to be 1.752 × 10−5(Ω·cm)−1