5 research outputs found
IMAGES I, MD101: A coring cruise of the R/V Marion Dufresne in the North Atlantic Ocean and Norwegian Sea
IMAGES coordinated a first international cruise in June and July 1995 over the North Atlantic and Norwegian sea on board the French RN Mm'ion Dufresne (MD 10 I, Brest - Stornoway (Lewis Island) - St-Pierre - Azores - Marseille). Its main scientific objective was the collection of giant piston cores on rapidly sedimenting drifts and continental margins of the North Atlantic ocean and Norwegian Sea, along the track of the main thermohaline circulation. The cruise crossed the North-East Atlantic margins, the Feni Drift, the Scottish, North Faeroes and Norwegian margins (to nON), the Iceland South-East margins, the Gardar Drift, the NAMOC Channel, the Newfoundland margin, the Bermuda rise, the mid Atlantic ridge, and the Azores and Iberian margins. Additional objectives covered: - the contribution of Mediterranean waters to the North Atlantic intermediate waters, with 5 cores recovered across the slopes of the Iberian margin; - the evolution of the NAMOC channel, in the deep North-West Atlantic basin, in relation to the growths and decays of the Laurentide ice sheet (8 Kullenberg and gravity cores). This was the maiden cruise of the new Mm'ion Dujresne, just 2 weeks out from her Le Havre shipyard. The ship had a very small number of problems, taking into account the number of things which were not ready just a few days before the departure. Two days were lost for engine problems. 70 scientists, students and technicians from 22 institutions (13 countries) participated to at least one of the three legs. 43 cores (mean length over 30 meters) have been retrieved during the cruise, described and measured for magnetic susceptibility, p-wave velocity, y density and spectral light reflectance. The longest core, MD 95-2036 (52.64 m) was retrieved at 4461 m water depth on the Bermuda Rise. It covers about 150 kyr with a sedimentation rate over 30 cm/kyr. The Calypso corer worked properly, once a few problems encountered at the be"innin" of the cruise had been solved (i.e. sliced or imploded PVC liner). This report presents preliminary results, mostly obtained on board: core descriptions, physical properties and micro-paleontological stratigraphy. Color reflectance (between 40° and 55°N) and magnetic susceptibility (between 50° and 700N) have been used for direct tuning of the time scales by cyclo-stratigraphy in the precession and obliquity bands. Ocean-wide correlations have been established over the last 250 kyr
Variations of porosity in calcareous sediments from the Ontong Java Plateau
Based on index properties measurements made on board the JOIDES Resolution, we studied porosity changes with depth in the fairly homogeneous deep-sea calcareous sediments cored during Ocean Drilling Program Leg 130 on the Ontong Java Plateau. Using Leg 130 data, we present evidence that the rate of porosity decrease with burial in calcareous oozes and chalks is related to the depth of deposition and thus probably depends on the conditioning of calcareous sediments by winnowing or dissolution processes during the time of deposition. The ooze-to-chalk transition is not clearly reflected in porosity profiles. In the ooze-chalk sections studied (the upper 600 mbsf), mechanical compaction is most likely the major process controlling the porosity decrease with depth of burial, whereas the chalk-limestone transition (at about 1100 mbsf at Site 807) is characterized by an intense chemical compaction leading to a drastic decrease in porosity values within 100 m. In oozes and chalks, porosity values were corrected to original (uncompacted) values using site-specific empirical regression equations. When plotted vs. age, corrected porosity profiles appear to correlate quite well from site to site in the sediments deposited during the last 15 m.y. This observation has considerable implications for seismic stratigraphy. Our attempt to correlate variations in porosity (or wet-bulk density) profiles with changes in carbonate content remained unsatisfactory. Index properties changes are likely caused by changes in the foraminifer content. If this is the case, we propose that large-scale porosity fluctuations that correlate from site to site are the result of changes in the surface productivity that lead to changes in the foraminifers-to-nannofossils ratio
Laboratory and Well-Log Velocity and Density Measurements from the Ontong Java Plateau: New in-situ corrections to laboratory data for pelagic carbonates
During Ocean Drilling Program Leg 130, sonic velocity and bulk density/porosity well logs were measured in five separate holes drilled through the sequence of pelagic carbonate oozes, chalks, and limestones that comprise the thick, continuous sedimentary cover on the Ontong Java Plateau. An internally consistent and continuous suite of shipboard laboratory velocity and sediment physical properties measurements were made from the top of each hole down through the entire logged interval. Because of the high quality of the data, extensive overlap of 500 m or more between the log and laboratory measurements at each hole, and the homogeneous nature of the sediments, we have been able to compare laboratory and in-situ log measurements in detail and to evaluate factors that alter laboratory data from their in-situ values. For measurements of bulk density and porosity, differences between laboratory and in-situ log measurements are very small and remain constant over the entire range of depths studied. We have applied a simple hydraulic rebound correction to the laboratory data that compensates for pore fluid expansion after removal of a sediment sample from in-situ conditions. The small, correctable differences between the laboratory and log data imply that mechanical rebound is significantly less than previous estimates (maximum near 5%) of rebound in pelagic carbonates. Furthermore, porosity rebound cannot be used to correct laboratory sonic velocity measurements to in-situ values. Such a rebound correction implicitly requires that laboratory and in-situ data must occupy identical fields on velocity-porosity crossplots. This condition is not met for the Ontong Java Plateau results because laboratory and in-situ logging data occupy distinct trends with little overlap between the two types of measurement. Mechanical rebound in pelagic carbonates cannot be used to correct either laboratory porosity or velocity measurements to in-situ values. The complex porosity systematics of these carbonates resulting from varying abundances of hollow foraminifer grains precluded use of an empirical correction derived from the log porosity and velocity data. Laboratory sonic velocity measurements can be corrected to in-situ values at all of the Ontong Java Plateau sites using a depth-based function derived from downhole differences between log and laboratory velocities in Hole 807A. The applicability of the depth correction implies that the effect of overburden pressure reduction on sediment elastic moduli is the most significant factor affecting laboratory velocity measurements. The depth correction to laboratory velocity measurements appears to be generally applicable to pelagic carbonate oozes and chalks of the Ontong Java Plateau, regardless of depositional depth or sediment age
Seismic stratigraphy of the Ontong Java Plateau
The Ontong Java Plateau, a large, deep-water carbonate plateau in the western equatorial Pacific, is an ideal location for studying responses of carbonate sedimentation to the effects of changing paleoceanographic conditions. These carbonate responses are often reflected in the physical properties of the sediment, which in turn control the appearance of seismic reflection profiles. Seismic stratigraphy analyses, correlating eight reflector horizons to each drill site, have been conducted in an attempt to map stratigraphic data. Accurate correlation of seismic stratigraphic data to drilling results requires conversion of traveltime to depth in meters. Synthetic seismogram models, using shipboard physical properties data, have been generated in an attempt to provide this correlation. Physical properties, including laboratory-measured and well-log data, were collected from sites drilled during Deep Sea Drilling Project Legs 30 and 89, and Ocean Drilling Program Leg 130, on the top and flank of the Ontong Java Plateau. Laboratory-measured density is corrected to in-situ conditions by accounting for porosity rebound resulting from removal of the sediment from its overburden. The correction of laboratory-measured compressional velocity to in situ appears to be largely a function of increases in elastic moduli (especially shear rigidity) with depth of burial, more than a function of changes in temperature, pressure, or density (porosity rebound). Well-log velocity and density data for the ooze intervals were found to be greatly affected by drilling disturbance; hence, they were disregarded and replaced by lab data for these intervals. Velocity and density data were used to produce synthetic seismograms. Correlation of seismic reflection data with synthetic data, and hence with depth below seafloor, at each drill site shows that a single velocity-depth function exists for sediments on the top and flank of the Ontong Java Plateau. A polynomial fit of this function provides an equation for domain conversion:
Depth (mbsf) = 44.49 + 0.800(traveltime[ms]) + 3.308 × 10 4 (traveltime[ms]2 )
Traveltime (ms) = -35.18 + 1.118(depth[mbsf]) - 1.969 × KT* (depth[mbsf]2 )
Seismic reflection profiles down the flank of the plateau undergo three significant changes: (1) a drastic thinning of the sediment column with depth, (2) changes in the echo-character of the profile (development of seismic facies), and (3) loss of continuous, coherent reflections. Sediments on the plateau top were largely deposited by pelagic processes, with little significant postdepositional or syndepositional modification. Sediments on the flank of the plateau are also pelagic, but they have been modified by faulting, erosion, and mass movement. These processes result in disrupted and incoherent reflectors, development of seismic facies, and redistribution of sediment on the flank of the plateau. Seismic stratigraphic analyses have shown that the sediment section decreases in thickness by as much as 65% between water depths of 2000 m water depth (at the top of the plateau) and 4000 m (near the base of the plateau). Thinning is attributed to increasing carbonate dissolution with depth. If this assumption is correct, then changes in the relative thicknesses of seismostratigraphic units at each drill site are indicative of changes in the position of the lysocline and the dissolution gradient between the lysocline and the carbonate compensation depth. We think that a shallow lysocline in the early Miocene caused sediment thinning. A deepening of the lysocline in the late-early Miocene caused relative thickening at each site. Within the middle Miocene, a sharp rise in lysoclinal depth occurs, concurrent with a steepening of the dissolution gradient. These events result in sediment thinning at all four sites. The thicker sections in the late Miocene likely correspond to a deepening of the lysocline, and a subsequent rise in the lysocline again hinders accumulation of sediment in the very late Miocene and Pliocene
The ACER pollen and charcoal database: a global resource to document vegetation and fire response to abrupt climate changes during the last glacial period
Quaternary records provide an opportunity to examine the nature of the
vegetation and fire responses to rapid past climate changes comparable in
velocity and magnitude to those expected in the 21st-century. The best
documented examples of rapid climate change in the past are the warming events
associated with the Dansgaard–Oeschger (D–O) cycles during the last glacial
period, which were sufficiently large to have had a potential feedback through
changes in albedo and greenhouse gas emissions on climate. Previous
reconstructions of vegetation and fire changes during the D–O cycles used
independently constructed age models, making it difficult to compare the
changes between different sites and regions. Here, we present the ACER (Abrupt
Climate Changes and Environmental Responses) global database, which includes
93 pollen records from the last glacial period (73–15 ka) with a temporal
resolution better than 1000 years, 32 of which also provide charcoal records.
A harmonized and consistent chronology based on radiometric dating (14C,
234U∕230Th, optically stimulated luminescence (OSL), 40Ar∕39Ar-dated tephra
layers) has been constructed for 86 of these records, although in some cases
additional information was derived using common control points based on event
stratigraphy. The ACER database compiles metadata including geospatial and
dating information, pollen and charcoal counts, and pollen percentages of the
characteristic biomes and is archived in Microsoft AccessTM at
https://doi.org/10.1594/PANGAEA.870867