776 research outputs found
Information Security Policy Violations in the Work-From-Home Era
Remote working has become the new normal in modern organizations. This transition has brought various challenges for the organizations in terms of their security infrastructure. Insider threats in organizations have been increasing in recent years. This paper proposes various behavioral and situational aspects that can influence employees’ intentions to violate information security policies (ISP) in a remote working environment, including subjective norms, the absence of peer monitoring, and the moderating role of shame. This research also proposes the role of neutralization techniques utilized by employees to rationalize and justify their behavior in the context of policy violations. A conceptual model has been developed, and a pilot study was conducted among 30 participants. This paper contributes to the body of knowledge on ISP compliance in the era of remote working, characterized by behavioral changes of employees
Preparation and structure of microporous silica membranes
Silica sols have been prepared in an alcoholic solution by hydrolysis and condensation of TEOS (tetra-ethyl-ortho-silicate) molecules as a function of water and nitric acid concentration. The polymers are intended as precursors for ceramic, gas separation membranes. These molecules show fractal behavior as determined by SAXS (Small Angle X-ray Scattering). Microporosity of dried and calcined silica polymers is determined by N2-adsorption at 77 K. Fractal dimension and porosity increase with increasing acid concentration. Both the sol structure and the drying kinetics determine the porosity values. N2-adsorption isotherms are not very suitable for the determination of pore size distributions of microporous silica
Lithium silicate based membranes for high temperature CO2 separation
Processing and characterisation of a novel membrane system for CO2 separation is detailed. The membrane was made of Lithium Orthosilicate (Li4SiO4), which has potential to react with CO2 molecules reversibly at high temperature. Using the membrane, a separation factor of 5.5 was measured between CO2 and N2 gas molecules at a temperature of 525C. The gas permeance value through the membrane at 525C was around 10-8 mol/m2 s Pa. Ionic diffusion through the liquid phase electrolyte and solid phase skeleton, produced by the reaction between CO2 and Li4SiO4,was suggested to assist the selective permeance of CO2. This facilitation effect was experimentally identified by examining the variation in CO2 flux with partial pressure. Oxygen ion conductivity through the skeleton material, Li2SiO3, is reportedly very high and therefore charge balance should have been achieved by O2- transfer through the skeleton
Unusual presentation of choriocarcinoma
BACKGROUND: Choriocarcinoma is an aggressive neoplasm arising in the body of the uterus. The disease normally spreads to lung and brain. CASE REPORT: A case of malignant trophoblastic disease with brain metastasis, raised intra cranial pressure and small bowel metastasis presenting with acute abdomen is reported. CONCLUSIONS: Malignant transformation in a hydatidiform mole is rare event. Involvement of gastrointestinal tract is rarer even in presence of disseminated disease. Surgery is the treatment of choice for gastrointestinal complications
Very low thermal conductivity in lanthanum phosphate-zirconia ceramic nanocomposites processed using a precipitation-peptization synthetic approach
A wet chemical synthetic approach involving precipitation-peptization mechanisms was successfully adopted for the development of LaPO4-ZrO2 nanocomposites with the ZrO2 content varying in the 5-20 wt% range. Stoichiometric lanthanum phosphate, formed as nanofibrils during the precipitation reaction with orthophosphoric acid, was subsequently transformed into nanorods of ~10 nm width and <100 nm length upon peptization at pH 2. Zirconia dispersions were homogeneously incorporated as ultrafine particulates through zirconium oxychloride hydrolysis using ammonia. The nanocomposite precursor thus obtained could be densified to >98% TD for the LaPO4-10 wt% ZrO2 composition upon sintering at 1600 °C. The addition of ZrO2 to LaPO4 impeded densification and grain growth inhibition of up to 50% was obtained for LaPO4-20 wt% ZrO2 nanocomposites. Furthermore, the nanocomposites indicated very low thermal conductivity values (1 W m-1 K-1) compared to single phase LaPO4. The non-reactivity of LaPO4 and ZrO2 at high temperatures and the low thermal conductivity values of LaPO4-ZrO2 render them effective for high temperature thermal insulation applications. © 2016 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique
A facile one pot synthetic approach for C3N4-ZnS composite interfaces as heterojunctions for sunlight-induced multifunctional photocatalytic applications
Herein, we report a facile one pot synthetic protocol for the creation of C3N4-ZnS composite interfaces by the co-pyrolysis of a precursor mix containing zinc nitrate, melamine, and thiourea at 550°C in air. The organic-inorganic semiconductor heterojunctions thus formed displayed increased absorbance in the longer wavelength region and facilitated broad absorption of visible light compared to pure ZnS, C3N4 and conventionally synthesized hybrid samples. The decreased emission intensity, increased photocurrent generation and decreased fluorescence lifetime revealed reduced exciton recombinations in the co-pyrolysed sample containing C3N4-ZnS heterostructures. The samples displayed sunlight driven photocatalytic reduction of nitrophenol as well as hydrogen generation (4 mmol g-1 h-1) by water splitting. © The Royal Society of Chemistry 2016
Recommended from our members
Distributed fibre optic strain sensing of an axially deformed well model in the laboratory
Well integrity is crucial in enabling sustainable gas production from methane hydrate reservoirs and real-time distributed monitoring techniques can potentially facilitate proper and timely inspection of well integrity during gas production. In this research, the feasibility of distributed fibre optic strain monitoring with Brillouin optical time domain reflectometry/analysis (BOTDR/A) for well monitoring was examined by conducting a laboratory test on a well model subjected to axial tensile deformation, which occurs due to reservoir compaction during gas production. First, the validity of the proposed experimental methodology is assessed by a finite element analysis and theoretical modelling of a well subjected to reservoir compaction. A 3 m long well model is developed from the modelling and is instrumented with different types of fibre optic cables to measure the distributed strain development during tensile loading. Results show that the proposed well model and loading scheme can satisfactorily simulate the axial tensile deformation of the well in the laboratory condition. BOTDR is capable of capturing the tensile strain development of the well model accurately within the limitation of the spatial resolution of the BOTDR measurement. To enable accurate distributed strain monitoring of well deformation with BOTDR/A, the following issues are discussed: tightly buffered coating layers around optical fibre cores through mechanical compression and/or chemical adhesion, and a small number of coating layers
Synthesis of gas and vapor molecular sieving silica membranes and analysis of pore size and connectivity
Pervaporation and gas permeation properties of microporous silica membranes made by a sol−gel method are discussed. Defect free molecular sieving membranes are prepared by a dip coating process. The molecular sieving performance was measured and controlled based on gas permeation behavior of the membranes. The apparent activation energy for helium permeation and He/N2 perm-selectivity values were used as the parameters for optimization of the membrane performance. The membranes with very high activation energy for He diffusion were used for pervaporation studies with a methanol/MTBE mixture at 323 K. Separation factor values as high as 260 were measured at a total liquid flux of 0.3 kg/m2 hr. Sorption studies performed on corresponding silica gels revealed a separation mechanism based on diffusion of vapor molecules. Permeation of the vapor molecules through the micropores followed an activated diffusion mechanism. The gas permeation data could provide an understanding of the pore size distribution of the membrane, and the vapor sorption and diffusion data on the size and connectivity of the membrane pores
Reactive oxygen species (ROS) mediated enhanced anti-candidal activity of ZnS-ZnO nanocomposites with low inhibitory concentrations
Enhanced antifungal activity against the yeast species Candida albicans, Candida tropicalis and Saccharomyces cerevisiae was displayed by ZnS-ZnO nanocomposites prepared by a simple precipitation technique. The antifungal activity was significantly more in the presence of indoor light than under dark conditions and was a clear confirmation of the inhibitory role of reactive oxygen species (ROS) generated in situ by the photocatalytic nanocomposites. The generation of ROS was further evidenced by flow cytometry results and membrane permeabilisation studies. Time kill assay and growth curve analysis indicated diminished antifungal activity under dark conditions due primarily to Zn2+ efflux in solution. © 2015 The Royal Society of Chemistry
- …