A study on job postures and musculoskeletal illnesses in dentists

Objectives: Musculoskeletal disorders (MSDs) compose a large part of occupational diseases in dental professionals, prevention of which is dependent on assessment and improvement of job postures by means of ergonomic interventions. This study was aimed at evaluation of ergonomic conditions of the profession of dentists and also at assessing the relationship between MSDs and conditions of work. Materials and Methods: This cross-sectional study was performed among 65 dentists using the method of Rapid Entire Body Assessment (REBA). The prevalence of MSDs was obtained by the use of the Nordic Musculoskeletal Questionnaire (NMQ). Results: In this investigation, the prevalence of MSDs for different body parts was: 75.9% for the neck, 58.6% for the shoulders, 56.9% for the upper back, 48.3% for the lower back and 44.8% for the wrist. Job analysis by the use of REBA showed that 89.6% of limbs in group A and 79.3% of limbs in group B had a score > 4. Only neck and lower back pain have significant relationship with the risk levels obtained using the REBA method. Conclusions: It can be concluded that work postures of dentists need to be improved. In addition to education, work station design, rest period during work and regular physical activities should be taken into account

Predicting mental imagery based BCI performance from personality, cognitive profile and neurophysiological patterns

Mental-Imagery based Brain-Computer Interfaces (MI-BCIs) allow their users to send commands to a computer using their brain-activity alone (typically measured by ElectroEncephaloGraphy— EEG), which is processed while they perform specific mental tasks. While very promising, MI-BCIs remain barely used outside laboratories because of the difficulty encountered by users to control them. Indeed, although some users obtain good control performances after training, a substantial proportion remains unable to reliably control an MI-BCI. This huge variability in user-performance led the community to look for predictors of MI-BCI control ability. However, these predictors were only explored for motor-imagery based BCIs, and mostly for a single training session per subject. In this study, 18 participants were instructed to learn to control an EEG-based MI-BCI by performing 3 MI-tasks, 2 of which were non-motor tasks, across 6 training sessions, on 6 different days. Relationships between the participants’ BCI control performances and their personality, cognitive profile and neurophysiological markers were explored. While no relevant relationships with neurophysiological markers were found, strong correlations between MI-BCI performances and mental-rotation scores (reflecting spatial abilities) were revealed. Also, a predictive model of MI-BCI performance based on psychometric questionnaire scores was proposed. A leave-one-subject-out cross validation process revealed the stability and reliability of this model: it enabled to predict participants’ performance with a mean error of less than 3 points. This study determined how users’ profiles impact their MI-BCI control ability and thus clears the way for designing novel MI-BCI training protocols, adapted to the profile of each user

Assaying Rho GTPase–dependent processes in Dictyostelium discoideum

The model organism D. discoideum is well-suited to investigate basic questions of molecular and cell biology, particularly those related to the structure, regulation and dynamics of the cytoskeleton, signal transduction, cell-cell adhesion and development. D. discoideum cells make use of Rho-regulated signaling pathways to reorganize the actin cytoskeleton during chemotaxis, endocytosis and cytokinesis. In this organism the Rho family encompasses 20 members, several belonging to the Rac subfamily, but there are no representatives of the Cdc42 and Rho subfamilies. Here we present protocols suitable for monitoring the actin polymerization response and the activation of Rac upon stimulation of aggregation competent cells with the chemoattractant cAMP, and for monitoring the localization and dynamics of Rac activity in live cells

Ergonomics observation: harvesting tasks at oil palm plantation

Objectives: Production agriculture is commonly associated with high prevalence of ergonomic injuries, particularly during intensive manual labor and during harvesting. This paper intends to briefly describe an overview of oil palm plantation management highlighting the ergonomics problem each of the breakdown task analysis. Methods: Although cross-sectional field visits were conducted in the current study, insight into past and present occupational safety and health concerns particularly regarding the ergonomics of oil palm plantations was further exploited. Besides discussion, video recordings were extensively used for ergonomics analysis. Results: The unique commodity of oil palm plantations presents significantly different ergonomics risk factors for fresh fruit bunch (FFB) cutters during different stages of harvesting. Although the ergonomics risk factors remain the same for FFB collectors, the intensity of manual lifting increases significantly with the age of the oil palm trees-weight of FFB. Conclusions: There is urgent need to establish surveillance in order to determine the current prevalence of ergonomic injuries. Thereafter, ergonomics interventions that are holistic and comprehensive should be conducted and evaluated for their efficacy using approaches that are integrated, participatory and cost-effective

Planck intermediate results. XLI. A map of lensing-induced B-modes

The secondary cosmic microwave background (CMB) $B$-modes stem from the post-decoupling distortion of the polarization $E$-modes due to the gravitational lensing effect of large-scale structures. These lensing-induced $B$-modes constitute both a valuable probe of the dark matter distribution and an important contaminant for the extraction of the primary CMB $B$-modes from inflation. Planck provides accurate nearly all-sky measurements of both the polarization $E$-modes and the integrated mass distribution via the reconstruction of the CMB lensing potential. By combining these two data products, we have produced an all-sky template map of the lensing-induced $B$-modes using a real-space algorithm that minimizes the impact of sky masks. The cross-correlation of this template with an observed (primordial and secondary) $B$-mode map can be used to measure the lensing $B$-mode power spectrum at multipoles up to $2000$. In particular, when cross-correlating with the $B$-mode contribution directly derived from the Planck polarization maps, we obtain lensing-induced $B$-mode power spectrum measurement at a significance level of $12\,\sigma$, which agrees with the theoretical expectation derived from the Planck best-fit $\Lambda$CDM model. This unique nearly all-sky secondary $B$-mode template, which includes the lensing-induced information from intermediate to small ($10\lesssim \ell\lesssim 1000$) angular scales, is delivered as part of the Planck 2015 public data release. It will be particularly useful for experiments searching for primordial $B$-modes, such as BICEP2/Keck Array or LiteBIRD, since it will enable an estimate to be made of the lensing-induced contribution to the measured total CMB $B$-modes.Comment: 20 pages, 12 figures; Accepted for publication in A&A; The B-mode map is part of the PR2-2015 Cosmology Products; available as Lensing Products in the Planck Legacy Archive http://pla.esac.esa.int/pla/#cosmology; and described in the 'Explanatory Supplement' https://wiki.cosmos.esa.int/planckpla2015/index.php/Specially_processed_maps#2015_Lensing-induced_B-mode_ma

Blood lead, cadmium and mercury among children from urban, industrial and rural areas of Fez Boulemane Region (Morocco): Relevant factors and early renal effects

Objectives: To describe blood lead (Pb-B), cadmium (Cd-B) and mercury (Hg-B) levels in children living in urban, industrial and rural areas in Fez city (north of Morocco) and to identify the determinants and some renal effects of exposure. Material and Methods: The study was conducted from June 2007 to January 2008 in 209 school children (113 girls, 96 boys), aged 6-12 years, from urban, industrial and rural areas in Fez city. Interview and questionnaires data were obtained. Blood and urinary samples were analyzed. Results: The mean of blood lead levels (Pb-B) in our population was 55.53 μg/l (range: 7.5-231.1 μg/l). Children from the urban area had higher blood lead levels (BLLs) mean (82.36 μg/l) than children from industrial and rural areas (48.23 and 35.99 μg/l, respectively); with no significant difference between boys and girls. BLLs were associated with traffic intensity, passive smoking and infancy in the urban area. The mean of blood cadmium levels (BCLs) was 0.22 μg/l (range: 0.06-0.68 μg/l), with no difference between various areas. Rural boys had higher BCLs mean than rural girls, but no gender influence was noticed in the other areas. BCLs were associated with the number of cigarettes smoked at children's homes. The blood mercury levels (BMLs) mean was 0.49 μg/l (range: 0.01-5.31 μg/l). The BMLs mean was higher in urban and industrial areas than in the rural area with no gender-related difference. BMLs were associated with amalgam fillings and infancy in the urban area. About 8% of the children had BLLs ≥ 100 μg/l particularly in the urban area, microalbuminuria and a decrease in height were noticed in girls from the inner city of Fez and that can be related to high BLLs (89.45 μg/l). Conclusions: There is a need to control and regulate potential sources of contamination by these trace elements in children; particularly for lead

Stochastic Gravity: Theory and Applications

Whereas semiclassical gravity is based on the semiclassical Einstein equation with sources given by the expectation value of the stress-energy tensor of quantum fields, stochastic semiclassical gravity is based on the Einstein-Langevin equation, which has in addition sources due to the noise kernel. In the first part, we describe the fundamentals of this new theory via two approaches: the axiomatic and the functional. In the second part, we describe three applications of stochastic gravity theory. First, we consider metric perturbations in a Minkowski spacetime, compute the two-point correlation functions of these perturbations and prove that Minkowski spacetime is a stable solution of semiclassical gravity. Second, we discuss structure formation from the stochastic gravity viewpoint. Third, we discuss the backreaction of Hawking radiation in the gravitational background of a black hole and describe the metric fluctuations near the event horizon of an evaporating black holeComment: 100 pages, no figures; an update of the 2003 review in Living Reviews in Relativity gr-qc/0307032 ; it includes new sections on the Validity of Semiclassical Gravity, the Stability of Minkowski Spacetime, and the Metric Fluctuations of an Evaporating Black Hol

Mechanisms of Vasorelaxation

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72633/1/j.1527-3466.1992.tb00249.x.pd

Stochastic Gravity: Theory and Applications

Whereas semiclassical gravity is based on the semiclassical Einstein equation with sources given by the expectation value of the stress-energy tensor of quantum fields, stochastic semiclassical gravity is based on the Einstein-Langevin equation, which has in addition sources due to the noise kernel.In the first part, we describe the fundamentals of this new theory via two approaches: the axiomatic and the functional. In the second part, we describe three applications of stochastic gravity theory. First, we consider metric perturbations in a Minkowski spacetime: we compute the two-point correlation functions for the linearized Einstein tensor and for the metric perturbations. Second, we discuss structure formation from the stochastic gravity viewpoint. Third, we discuss the backreaction of Hawking radiation in the gravitational background of a quasi-static black hole.Comment: 75 pages, no figures, submitted to Living Reviews in Relativit