Wall-Resolved Large Eddy Simulations of Transonic Shock-Induced Flow Separation

This paper reports the wall-resolved large eddy simulations of shock-induced boundary layer separation over an axisymmetric bump for a flow Mach number of 0.875 and a chord-based Reynolds number of 2.763 million. The incoming boundary layer has a momentum-thickness Reynolds number of 6600 at one and a half chord lengths upstream of the leading edge. The calculations simulate the experiment by Bachalo and Johnson (AIAA Journal, Vol. 24, No. 3, 1986), except that the tunnel walls are ignored and the simulations are performed assuming free air with as many as 24 billion grid points. The effects of domain span, grid resolution and time step on the predictions are examined. The results are found to show some sensitivity to the studied parameters. Owing to the outer boundary conditions, the predicted surface pressure distribution as well as the flow separation and reattachment locations tend to agree better with the experimental results from the larger (6 6 ft) tunnel than those from the smaller (2 2 ft) tunnel. The predicted Reynolds shear stress profiles in the separated region differ by as much as 31%from the experimental results that were only obtained in the smaller tunnel. The most accurate surface pressure distribution obtained in this study lies within the scatter of the measurements taken in the two facilities

Epidemiology and Outcome of Fungemia in a Cancer Cohort of the Infectious Diseases Group (IDG) of the European Organization for Research and Treatment of Cancer (EORTC 65031)

In a prospective cohort study of 145 030 admissions of cancer patients from 13 European Organisation for Research and Treatment of Cancer centers fungemia occurred in 0.23%. Candida albicans was the predominant pathogen. Fungemia was associated with substantial mortality. Antifungal prophylaxis and remission of cancer predicted better surviva

Novel insights into host-fungal pathogen interactions derived from live-cell imaging

Acknowledgments The authors acknowledge funding from the Wellcome Trust (080088, 086827, 075470 and 099215) including a Wellcome Trust Strategic Award for Medical Mycology and Fungal Immunology 097377 and FP7-2007–2013 grant agreement HEALTH-F2-2010-260338–ALLFUN to NARG.Peer reviewedPublisher PD

Stories of Hell and Healing: Internet Users’ Construction of Benzodiazepine Distress and Withdrawal

Abstract Benzodiazepines are a group of drugs used mainly as sedatives, hypnotics, antiepileptics, and muscle relaxants. Consumption is recommended for 2 to 4 weeks only, due to fast onset of dependency and potentially distressing withdrawal symptoms. Few peer-review studies have drawn on the user experiences and language to appreciate firsthand experiences of benzodiazepine withdrawal or discontinuation syndrome. We looked extensively at patient stories of benzodiazepine withdrawal and recovery on Internet support sites and YouTube. Our analysis indicated that users employ rich metaphors to portray the psychologically disturbing and protracted nature of their suffering. We identified seven major themes: hell and isolation, anxiety and depression, alienation, physical distress, anger and remorse, waves and windows, and healing and renewal. By posting success stories, ex-users make known that “healing” can be a long, unpredictable process, but distress does lessen, and recovery can happen

Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

Apical extrusion of debris using reciprocating files and rotary instrumentation systems

Background: To compare the preparation time and amount of apically extruded debris after the  preparation of root canals in extracted human teeth using the reciprocating files and rotary nickel.titanium systems.Procedure: Sixty extracted human mandibular premolars were used. The root canals were instrumented using reciprocating (WaveOne, Reciproc, SafeSider) or rotary motion (Typhoon, ProTaper Universal,  Mtwo), and the debris produced was collected in glass vials. The remaining debris was assessed using a microbalance and statistically analyzed using the one.way ANOVA and Duncan multiple range tests at a significance level of P < 0.05. The time required to prepare the canals with different instruments was also recorded.Results: The Reciproc group produced significantly less debris when compared to the Typhoon group (P < 0.05), and instrumentation with the single.file systems was significantly faster than in the multi.file systems (P < 0.05). The WaveOne group extruded significantly more debris per unit of time than the other groups, with the exception of the Typhoon group (P < 0.05).Conclusion: According to our study, all systems caused apical debris extrusion. However, the Reciproc group was associated with less debris extrusion when compared to the other groups.Key words: Apical extrusion, endodontics, single file system

Anatomy of parotid gland and its secretory ducts in sheep

Background: The parotid gland in sheep ends freely in front of the masseter muscle, and paracondylary section of occipital bone and extends deep until pterygoid extends of sphenoid bone and hyoid bone. The structure of salivary glands in mammals has been thoroughly studied using histological and sialographic method. This study aimed to reveal the detailed anatomic features and race-specific differences of the canal system of the parotid glands in Akkaraman sheep by using the corrosion cast technique. Materials and methods: Thirteen sheep parotid glands from 7 Akkaraman sheep were used in this study. Parotid glands were removed from their places with ducts. Measurements were made with a calliper from back to front, top to bottom and inside to outside. After dissection of the parotid glands, their volumes were measured according to the ‘Archimedes principle’. Also, 13 sheep parotid glands were examined using the polyester resin method. Results: In the present study, our average metric results were: length of parotid duct was 10.92 ± 1.027 cm, length of parotid gland was 5.87 ± 1.04 cm, volume of parotid gland was 12.50 ± 2.48 cm3, thickness of parotid gland was 0.75 ± ± 0.36 cm and width of parotid gland was 4.07 ± 0.43 cm. The average weight of the parotid gland of Akkaraman sheep was identified as 25.3 g. Accessory parotid gland was not encountered in the current study. Conclusions: It was observed that polyester entered into the parotid duct and filled up until the acinus and made both acinus and secretory ducts well-examined in this study. It was also observed that the parotid gland consisted of lobes and lobules. The average number of lobes was 12. The number of lobules in a lobe varied between 3 and 16, each lobe consisted of an average of 9 lobules. It was found that each lobe has its own lobar duct. Copyright © 2022 Via Medica

Performance and Operation of the CMS Electromagnetic Calorimeter

The operation and general performance of the CMS electromagnetic calorimeter using cosmic-ray muons are described. These muons were recorded after the closure of the CMS detector in late 2008. The calorimeter is made of lead tungstate crystals and the overall status of the 75848 channels corresponding to the barrel and endcap detectors is reported. The stability of crucial operational parameters, such as high voltage, temperature and electronic noise, is summarised and the performance of the light monitoring system is presented