Agarwood Leaf Essential Oil Characterization and Effects on MCF-7 Breast Cancer Cells

Breast cancer continues to remain as the leading cause of cancer mortality among women worldwide. Agents for prevention and cure for breast cancer are contiuously being researched. İn particular, agarwood essential oil from resin infiltrated heartwood has been reported to have substantial evidences of medicinal benefits. Nevertheless, there is very limited report on agarwood leaf essential oil (ALEO). Hence, this present study was conducted to evaluate the physicochemical properties, chemical constituents and anticancer activity of ALEO. ALEO was observed to be of pale-yellow colour with sweet smell. Other physicochemical properties include refractive index of 1.44, specific gravity of 0.886, saponification value of 131.88 mg KOH/g, acid value of 2.80 mg KOH/g and iodine value of 105.07 gI2/100g. The profiling of chemical constituents using gas chromatography-mass spectrometry (GCMS) revealed 19 compounds. Hexadecanoic acid was the major compound (64.41%). The biomarkers of agarwood; azulene (0.619%) and guaiol (0.2997%) were also detected. ALEO was tested for anticancer activity against MCF-7 cancer cells using WST-8 assay. ALEO showed the IC50 value of 31% (v/v) against MCF-7 cells after 36 hours of treatment. In conclusion, this study provides information on ALEO physicochemical properties and chemical constituents that can be used as benchmark for quality assurance as well as proof that ALEO holds a potential as anticancer agent

Application of Genetic Algorithm to the Design Optimization of Complex Energy Saving Glass Coating Structure

Attenuation of GSM, GPS and personal communication signal leads to poor communication inside the building using regular shapes of energy saving glass coating. Thus, the transmission is very low. A brand new type of band pass frequency selective surface (FSS) for energy saving glass application is presented in this paper for one unit cell. Numerical Periodic Method of Moment approach according to a previous study has been applied to determine the new optimum design of one unit cell energy saving glass coating structure. Optimization technique based on the Genetic Algorithm (GA) is used to obtain an improved in return loss and transmission signal. The unit cell of FSS is designed and simulated using the CST Microwave Studio software at based on industrial, scientific and medical bands (ISM). A unique and irregular shape of an energy saving glass coating structure is obtained with lower return loss and improved transmission coefficient

Topical piroxicam in vitro release and in vivo anti-inflammatory and analgesic effects from palm oil esters-based nanocream

During recent years, there has been growing interest in use of topical vehicle systems to assist in drug permeation through the skin. Drugs of interest are usually those that are problematic when given orally, such as piroxicam, a highly effective anti-inflammatory, anti-pyretic, and analgesic, but with the adverse effect of causing gastrointestinal ulcers. The present study investigated the in vitro and in vivo pharmacodynamic activity of a newly synthesized palm oil esters (POEs)-based nanocream containing piroxicam for topical delivery

Study of Pseudoternary Phase Diagram Behaviour and the Effect of Several Tweens and Spans on Palm Oil Esters Characteristics

Palm oil esters are high molecular weight esters oil that has been newly synthesized by University Putra Malaysia researchers. It has received a lot of attention for its pharmaceutical and chemical application. The aim of this study is to study the effects of the palm oil esters with different HLB surfactant mixture on the ternary diagrams behaviour and to confine the various systems resulted from these combinations. These systems include traditional emulsion, gel area, transpernat micro-emulsion area, O/W and W/O emulsions. In this study, pseudoternary phase diagrams of water, POEs and non-ionic surfactant mixture of several HLB values were constructed using water titration method. The resultant mixtures collected after each addition and mixing of water were analysed visually, along with conductivity, dilution in water and dye test (methylene blue) to classify them as O/W emulsion (transparent and opaque) or W/O (opaque) and liquid or gel. As a conclusion, palm oil esters were found to be suitable for the formulation of different types of emulsion. Additionally, different HLB value of non-ionic surfactant(s) exhibited different pseudoternary phase diagram characteristics.Keywords: palm oil esters, Tween, Span, Pseudoternary phase diagram, O/W emulsio

Stability Studies of Nano-Scaled Emulsions Containing Ibuprofen for Topical Delivery

Biphasic systems, like emulsions and nano-scaled emulsions, are naturally unstable. The extent and rate of the destabilization process differ from system to another. The stability of such systems upon storage is an important aspect to ensure their abilities to exert the expected effects and consequently render them pharmaceutically acceptable. In the present study, the stability of the nano-scaled emulsion containing newly synthesized palm oil esters (POEs) was assessed under different storage conditions and over specified durations. Three nano-scaled emulsion formulae were chosen for this investigation. They basically comprised ibuprofen as the active ingredient, triethanolamine aqueous solution pH 7.4 as the external phase, POEs as the oil phase, Tween 80 as an emulsifier, Carbopol® 940 as the rheology modifier and menthol or limonene as penetration promoters. The evaluation processes were carried out at several temperatures (4, 25 and 40 °C) with factors, such as droplets size, electrical conductivity, drug content, pH and flow properties were relatively held constant. The data collectively showed that all formulations were stable over an observation period of three months.Keywords: Ibuprofen, nano-scaled emulsion, palm oil esters, stabilit

Modification and Validation of an HPLC Method for Quantification of Piroxicam

Piroxicam is a NSAID that is widely used in the treatment of joint pain and osteoarthritis. The objectives of the study were to modify and validate HPLC method so as to obtain an accurate, sensitive and precise method to quantify piroxicam concentrations without interference from the other ingredients presence in the formulation. The method published by Owen et al. was adapted and modified to suit the above requirements. The modification was carried out on the mobile phase as the mobile phase used by the authors was not able to separate the drug peak from the interference of the formulation excipients. The modified mobile phase consisted of 5 mM of disodium hydrogen phosphate adjusted to pH 3 with concentrated ortho phosphoric acid, methanol, acetonitrile and glacial acetic acid at ratios of 27:20:52:1 respectively. The method was validated and found to be specific, precise, accurate and reproducible even when run at different times of the same day or on different times on different days. The limit of detection and quantification were determined to be 0.035 μg/ml and 0.0625 μg/ml respectively. It could be concluded that this method could be used to determine piroxicam concentration in the samples collected from in vitro study of permeability through the synthetic membrane and excised rat skin.Keywords: Piroxicam, HPLC, Quantification analysis, Modification

Study of Pseudoternary Phase Diagram Behaviour and the Effect of Several Tweens and Spans on Palm Oil Esters Characteristics

Palm oil esters are high molecular weight esters oil that has been newly synthesized by University Putra Malaysia researchers. It has received a lot of attention for its pharmaceutical and chemical application. The aim of this study is to study the effects of the palm oil esters with different HLB surfactant mixture on the ternary diagrams behaviour and to confine the various systems resulted from these combinations. These systems include traditional emulsion, gel area, transpernat micro-emulsion area, O/W and W/O emulsions. In this study, pseudoternary phase diagrams of water, POEs and non-ionic surfactant mixture of several HLB values were constructed using water titration method. The resultant mixtures collected after each addition and mixing of water were analysed visually, along with conductivity, dilution in water and dye test (methylene blue) to classify them as O/W emulsion (transparent and opaque) or W/O (opaque) and liquid or gel. As a conclusion, palm oil esters were found to be suitable for the formulation of different types of emulsion. Additionally, different HLB value of non-ionic surfactant(s) exhibited different pseudoternary phase diagram characteristics.Keywords: palm oil esters, Tween, Span, Pseudoternary phase diagram, O/W emulsio

Stability Studies of Nano-Scaled Emulsions Containing Ibuprofen for Topical Delivery

Biphasic systems, like emulsions and nano-scaled emulsions, are naturally unstable. The extent and rate of the destabilization process differ from system to another. The stability of such systems upon storage is an important aspect to ensure their abilities to exert the expected effects and consequently render them pharmaceutically acceptable. In the present study, the stability of the nano-scaled emulsion containing newly synthesized palm oil esters (POEs) was assessed under different storage conditions and over specified durations. Three nano-scaled emulsion formulae were chosen for this investigation. They basically comprised ibuprofen as the active ingredient, triethanolamine aqueous solution pH 7.4 as the external phase, POEs as the oil phase, Tween 80 as an emulsifier, Carbopol® 940 as the rheology modifier and menthol or limonene as penetration promoters. The evaluation processes were carried out at several temperatures (4, 25 and 40 °C) with factors, such as droplets size, electrical conductivity, drug content, pH and flow properties were relatively held constant. The data collectively showed that all formulations were stable over an observation period of three months.Keywords: Ibuprofen, nano-scaled emulsion, palm oil esters, stabilit

Modification and Validation of an HPLC Method for Quantification of Piroxicam

Piroxicam is a NSAID that is widely used in the treatment of joint pain and osteoarthritis. The objectives of the study were to modify and validate HPLC method so as to obtain an accurate, sensitive and precise method to quantify piroxicam concentrations without interference from the other ingredients presence in the formulation. The method published by Owen et al. was adapted and modified to suit the above requirements. The modification was carried out on the mobile phase as the mobile phase used by the authors was not able to separate the drug peak from the interference of the formulation excipients. The modified mobile phase consisted of 5 mM of disodium hydrogen phosphate adjusted to pH 3 with concentrated ortho phosphoric acid, methanol, acetonitrile and glacial acetic acid at ratios of 27:20:52:1 respectively. The method was validated and found to be specific, precise, accurate and reproducible even when run at different times of the same day or on different times on different days. The limit of detection and quantification were determined to be 0.035 μg/ml and 0.0625 μg/ml respectively. It could be concluded that this method could be used to determine piroxicam concentration in the samples collected from in vitro study of permeability through the synthetic membrane and excised rat skin.Keywords: Piroxicam, HPLC, Quantification analysis, Modification