15 research outputs found
Detection of quantitative trait loci for locomotion and osteochondrosis-related traits in Large White x Meishan pigs.
Surface rupture of multiple crustal faults in the 2016 Mw 7.8 Kaikōura, New Zealand, earthquake
Multiple (>20
>20
) crustal faults ruptured to the ground surface and seafloor in the 14 November 2016 M w
Mw
7.8 Kaikōura earthquake, and many have been documented in detail, providing an opportunity to understand the factors controlling multifault ruptures, including the role of the subduction interface. We present a summary of the surface ruptures, as well as previous knowledge including paleoseismic data, and use these data and a 3D geological model to calculate cumulative geological moment magnitudes (M G w
MwG
) and seismic moments for comparison with those from geophysical datasets. The earthquake ruptured faults with a wide range of orientations, sense of movement, slip rates, and recurrence intervals, and crossed a tectonic domain boundary, the Hope fault. The maximum net surface displacement was ∼12 m
∼12 m
on the Kekerengu and the Papatea faults, and average displacements for the major faults were 0.7–1.5 m south of the Hope fault, and 5.5–6.4 m to the north. M G w
MwG
using two different methods are M G w
MwG
7.7 +0.3 −0.2
7.7−0.2+0.3
and the seismic moment is 33%–67% of geophysical datasets. However, these are minimum values and a best estimate M G w
MwG
incorporating probable larger slip at depth, a 20 km seismogenic depth, and likely listric geometry is M G w
MwG
7.8±0.2
7.8±0.2
, suggests ≤32%
≤32%
of the moment may be attributed to slip on the subduction interface and/or a midcrustal detachment. Likely factors contributing to multifault rupture in the Kaikōura earthquake include (1) the presence of the subduction interface, (2) physical linkages between faults, (3) rupture of geologically immature faults in the south, and (4) inherited geological structure. The estimated recurrence interval for the Kaikōura earthquake is ≥5,000–10,000 yrs
≥5,000–10,000 yrs
, and so it is a relatively rare event. Nevertheless, these findings support the need for continued advances in seismic hazard modeling to ensure that they incorporate multifault ruptures that cross tectonic domain boundaries
Quantitative geometric description of fracture systems in an andesite lava flow using terrestrial laser scanner data
Permeability hosted in andesitic lava flows is dominantly controlled by fracture systems, with geometries that are often poorly constrained. This paper explores the fracture system geometry of an andesitic lava flow formed during its emplacement and cooling over gentle paleo-topography, on the active Ruapehu volcano, New Zealand. The fracture system comprises column-forming and platy fractures within the blocky interior of the lava flow, bounded by autobreccias partially observed at the base and top of the outcrop. We use a terrestrial laser scanner (TLS) dataset to extract column-forming fractures directly from the point-cloud shape over an outcrop area of ∼3090 m2. Fracture processing is validated using manual scanlines and high-resolution panoramic photographs. Column-forming fractures are either steeply or gently dipping with no preferred strike orientation. Geometric analysis of fractures derived from the TLS, in combination with virtual scanlines and trace maps, reveals that: (1) steeply dipping column-forming fracture lengths follow a scale-dependent exponential or log-normal distribution rather than a scale-independent power-law; (2) fracture intensities (combining density and size) vary throughout the blocky zone but have similar mean values up and along the lava flow; and (3) the areal fracture intensity is higher in the autobreccia than in the blocky zone. The inter-connected fracture network has a connected porosity of ∼0.5 % that promote fluid flow vertically and laterally within the blocky zone, and is partially connected to the autobreccias. Autobreccias may act either as lateral permeability connections or barriers in reservoirs, depending on burial and alteration history. A discrete fracture network model generated from these geometrical parameters yields a highly connected fracture network, consistent with outcrop observations.peer-reviewed2019-06-0
Fracture geometries and processes in andesites at Mt Ruapehu, New Zealand: implications for the fracture modelling of the Rotokawa Geothermal Field
Fluid flow in the high-temperature (300 C), andesite-hosted Rotokawa geothermal reservoir (Taupo Volcanic Zone (TVZ), New Zealand) is largely controlled by fractures and faults but their geometries are still poorly understood. The aim of this study is to measure and derive geometric parameters characterising fractures in andesitic formations in order to use these as input for dis-crete fracture network models (DFN) and predictive fluid flow models of the Rotokawa geothermal reservoir. We make use of two complementary fracture datasets. (1) The fracture geometry in-trinsic to andesitic formations are studied on outcrops at Mt Ruapehu (TVZ volcano), with the measurement of c. 200 fractures along a 100 m long scanline, and the acquisition of a Terrestrial Laser Scanner (TLS) scan acquired over the entire outcrop. (2) Fracture orientation, width and spacing are determined for three acoustic borehole televiewer (BHTV) logs and 33 m of cores from the Rotokawa Geothermal Field. Two types of fractures are observed at the Mt Ruapehu outcrop. The majority of fractures form sub-vertical cooling joints. The TLS scan samples six dip directions suggesting an hexagonal section typical of basaltic lava flows. The scanline survey did not fully sample the six directions. The preliminary analysis of fracture length on the scanline survey highlights the high degree of fracture connectivity and a weak spatial clustering. A subset of the fractures are sub-horizontal, highly clustered and are aligned with possible changes of crystallinity, viscosity and flow banding within the flow. Further analysis is required to make firm conclusions about the fracture length and spacing. Fractures are conchoidal which enhances the fracture linkages, which cannot be easily quantified from scanline surveys and will be evaluated on the TLS scans. The BHTV and core analysis reveals that fractures within the reservoir are predominantly steeply dipping and NE SW-striking, parallel to the trend of the maximum horizontal compressive stress (S Hmax) and the rift axis. Fractures in the reservoir are preferentially oriented with respect to the in-situ stress and the tectonic faults but may be locally inherited from cooling joints and fractures associated with the internal fabric of the lava flows. BHTV logs indicate that the 8 50 mm wide fractures follow an exponential distribution. The log-normal, power-exponential or power-law distributions have similar likelihoods for fracture spacing of 0.005 50 m. Low spacing are best fitted by either an exponential, gamma or power-exponential distribution. This change at c. 1 m spacing may correspond to the threshold at which fracture interaction occurs. The lithological controls on the fractures is observed at both the outcrop and core scale, with fracture being less numerous and more tortuous in breccias than in massive lava. The breccias are typically more permeable than the massive interior, and offer lateral and vertical connectivity in reservoirs. Breccias also affect the propagation of the fractures due to their heterogeneity. Integrating these observations into fracture models will be fundamental to the prediction capability of the fracture models of the Rotokawa andesitic reservoir. Observations made at Ruapehu and Rotokawa have wide implication for the successful development of geothermal resources in volcanic-hosted geothermal reservoirs
Remnants of Early Mesozoic basalt of the Central Atlantic Magmatic Province in Cape Breton Island, Nova Scotia, Canada
Amygdaloidal basaltic flows of the Ashfield Formation were encountered in two drill holes in areas of positive aeromagnetic anomalies in the Carboniferous River Denys Basin in southwestern Cape Breton Island, Nova Scotia. One sample of medium-grained basalt yielded a plateau age of 201.8 ± 2.0 Ma, similar to the U–Pb and 40Ar/39Ar crystallization ages from basaltic flows and dykes in the Newark Supergroup. A second sample of zeolite-bearing basalt yielded a discordant age spectrum and a younger age of ca. 190 Ma, which is interpreted to date a widespread hydrothermal event related to zeolite formation. Whole-rock chemical data show that the Ashfield Formation basalt is low-Ti continental tholeiite, consistent with its within-plate tectonic setting. Chemically, it resembles basaltic flows in the Mesozoic Fundy and Grand Manan basins exposed in southern Nova Scotia and eastern New Brunswick and elsewhere in Central Atlantic Magmatic Province (CAMP). The age and geochemical data from the Ashfield Formation provide the first evidence for early Mesozoic CAMP volcanism in Cape Breton Island and demonstrate that the event was more widespread in Nova Scotia than previously thought, which has implications for its continuity and extent elsewhere within CAMP.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author
Detection of quantitative trait loci for locomotion and osteochondrosis-related traits in Large White 5 Meishan pigs
Petrochemistry and hydrothermal alteration within the Tyrone Igneous Complex, Northern Ireland: implications for VMS mineralization in the British and Irish Caledonides
Although volcanogenic massive sulfide (VMS) deposits can form within a wide variety of rift-related tectonic environments, most are preserved within suprasubduction affinity crust related to ocean closure. In stark contrast to the VMS-rich Appalachian sector of the Grampian-Taconic orogeny, VMS mineralization is rare in the peri-Laurentian British and Irish Caledonides. Economic peri-Gondwanan affinity deposits are limited to Avoca and Parys Mountain. The Tyrone Igneous Complex of Northern Ireland represents a ca. 484–464 Ma peri-Laurentian affinity arc–ophiolite complex and a possible broad correlative of the Buchans-Robert’s Arm belt of Newfoundland, host to some of the most metal-rich VMS deposits globally. Stratigraphic horizons prospective for VMS mineralization in the Tyrone Igneous Complex are associated with rift-related magmatism, hydrothermal alteration, synvolcanic faults, and high-level subvolcanic intrusions (gabbro, diorite, and/or tonalite). Locally intense hydrothermal alteration is characterized by Na-depletion, elevated SiO2, MgO, Ba/Sr, Bi, Sb, chlorite–carbonate–pyrite alteration index (CCPI) and Hashimoto alteration index (AI) values. Rift-related mafic lavas typically occur in the hanging wall sequences to base and precious metal mineralization, closely associated with ironstones and/or argillaceous sedimentary rocks representing low temperature hydrothermal venting and volcanic quiescence. In the ca. 475 Ma pre-collisional, calc-alkaline lower Tyrone Volcanic Group rift-related magmatism is characterized by abundant non-arc type Fe-Ti-rich eMORB, island-arc tholeiite, and low-Zr tholeiitic rhyolite breccias. These petrochemical characteristics are typical of units associated with VMS mineralization in bimodal mafic, primitive post-Archean arc terranes. Following arc-accretion at ca. 470 Ma, late rifting in the ensialic upper Tyrone Volcanic Group is dominated by OIB-like, subalkaline to alkali basalt and A-type, high-Zr rhyolites. These units are petrochemically favorable for Kuroko-type VMS mineralization in bimodal-felsic evolved arc terranes. The scarcity of discovered peri-Laurentian VMS mineralization in the British and Irish Caledonides is due to a combination of minimal exploration, poor-preservation of upper ophiolite sequences, and limited rifting in the Lough Nafooey arc of western Ireland. The geological and geochemical characteristics of the Tyrone Volcanic Group of Northern Ireland and peri-Gondwanan affinity arc/backarc sequences of Ireland and northwest Wales represent the most prospective sequences in the British and Irish Caledonides for VMS mineralization
Distribution, mineralogy and geochemistry of silica-iron exhalites and related rocks from the Tyrone Igneous Complex: Implications for VMS mineralization in Northern Ireland
Iron formations, hematitic cherts (jaspers), ‘tuffites’, silica-iron exhalites and other metalliferous chemical sedimentary rocks are important stratigraphic marker horizons in a number of volcanogenic massive sulfide (VMS) districts worldwide, forming during episodes of regional hydrothermal activity. The VMS prospective ca. 484–464 Ma Tyrone Igneous Complex of Northern Ireland represents a structurally dissected arc-ophiolite complex that was accreted to the composite margin of Laurentia during the Grampian orogeny (ca. 475–465 Ma), and a potential broad correlative to the VMS-rich Buchans–Robert's Arm arc system of the Newfoundland Appalachians. Silica-iron-rich rocks occur at several stratigraphic levels in the Tyrone Igneous Complex spatially and temporally associated with rift-related basalts (e.g., Fe–Ti-rich eMORB, IAT, OIB) and zones of locally intense hydrothermal alteration. In the ca. 475–474 Ma lower Tyrone Volcanic Group, these rocks are characterized by massive, 1–5 m thick blood-red jaspers, hematitic siltstones and mudstones, and intensely silica-hematite altered tuffs and flows. Their mineralogy is dominated by quartz–hematite ± magnetite–(chlorite-sericite ± tremolite/actinolite), with Fe concentrations rarely exceeding 10 wt.%. Relict textures (including the presence of coalesced spherules of silica-iron oxides) in rocks exposed at Tanderagee NW, Creggan Lough and Tory's Hole are indicative of seafloor exhalation, whereas replacement of the original volcanic stratigraphy is evident to varying degrees at Tanderagee, Beaghbeg and Bonnety Bush. In the structurally overlying ca. 473–469 Ma upper Tyrone Volcanic Group, chemical sedimentary rocks include recrystallized: (i) thin and laterally-restricted jaspers in thick sequences of graphitic pelite at Boheragh; and (ii) laterally-persistent sulfidic cherts and ironstones dominated by quartz–hematite–magnetite–(chlorite) or quartz–pyrite–(chlorite) in sequences of tuff at Broughderg. Compared to chemical sedimentary rocks associated with VMS deposits worldwide, their geochemical characteristics are most similar to silica-iron exhalites of the Mount Windsor Subprovince (SE Australia) and jaspers of Central Arizona, Bald Mountain (Northern Maine), the Urals, Iberian Pyrite Belt and Løkken ophiolite (Norway). Positive Eu anomalies (at Slieve Gallion and Tanderagee NW), elevated Cu + Pb + Zn, Au, Fe/Ti, Fe/Mn, Sb, Ba/Zr and Fe + Mn/Al, together with low REE, Sc, Zr and Th, are indicative of a greater hydrothermal component and potentially more VMS-proximal signatures. Based on bulk ironstone geochemistry, Bonnety Bush, Tanderagee NW-Creggan Lough, Broughderg and Drummuck (Slieve Gallion) are considered the most VMS prospective areas in the Tyrone Igneous Complex and warrant further exploration
Episodic arc-ophiolite emplacement and the growth of continental margins: Late accretion in the Northern Irish sector of the Grampian-Taconic orogeny
In order to understand the progressive growth of continental margins and the evolution of continental crust, we must first understand the formation of allochthonous ophiolitic and island-arc terranes within ancient orogens and the nature of their accretion. During the early Paleozoic closure of the Iapetus Ocean, diverse sets of arc terranes, oceanic tracts, and ribbon-shaped microcontinental blocks were accreted to the passive continental margin of Laurentia during the Grampian-Taconic orogeny. In the northern Appalachians in central Newfoundland, Canada, three distinct phases of arc-ophiolite accretion have been recognized. New field mapping, high-resolution airborne geophysics, whole-rock and Nd-isotope geochemistry, and U-Pb zircon geochronology within the Tyrone Volcanic Group of Northern Ireland have allowed all three episodes to now be correlated into the British and Irish Caledonides. The Tyrone Volcanic Group (ca. 475–469 Ma) is characterized by mafic to intermediate lavas, tuffs, rhyolite, banded chert, ferruginous jasperoid, and argillaceous sedimentary rocks cut by numerous high-level intrusive rocks. Geochemical signatures are consistent with formation within an evolving peri-Laurentian island-arc/backarc, which underwent several episodes of intra-arc rifting prior to its accretion at ca. 470 Ma to an outboard peri-Laurentian microcontinental block. Outriding microcontinental blocks played a fundamental role within the orogen, explaining the range of ages for Iapetan ophiolites and the timing of their accretion, as well as discrepancies between the timing of ophiolite emplacement and the termination of the Laurentian Cambrian–Ordovician shelf sequences. Accretion of the Tyrone arc and its associated suprasubduction-zone ophiolite represents the third stage of arc-ophiolite emplacement to the Laurentian margin during the Grampian-Taconic orogeny in the British and Irish Caledonides
Landslides caused by the M<sub>w</sub>7.8 Kaikōura earthquake and the immediate response
Tens of thousands of landslides were generated over 10, 000 km2 of North Canterbury and Marlborough as a consequence of the 14 November 2016, MW7.8 Kaikōura Earthquake. The most intense landslide damage was concentrated in 3500 km2 around the areas of fault rupture. Given the sparsely populated area affected by landslides, only a few homes were impacted and there were no recorded deaths due to landslides. Landslides caused major disruption with all road and rail links with Kaikōura being severed. The landslides affecting State Highway 1 (the main road link in the South Island of New Zealand) and the South Island main trunk railway extended from Ward in Marlborough all the way to the south of Oaro in North Canterbury. The majority of landslides occurred in two geological and geotechnically distinct materials reflective of the dominant rock types in the affected area. In the Neogene sedimentary rocks (sandstones, limestones and siltstones) of the Hurunui District, North Canterbury and around Cape Campbell in Marlborough, first-time and reactivated rock-slides and rock-block slides were the dominant landslide type. These rocks also tend to have rock material strength values in the range of 5-20 MPa. In the Torlesse 'basement' rocks (greywacke sandstones and argillite) of the Kaikōura Ranges, first-time rock and debris avalanches were the dominant landslide type. These rocks tend to have material strength values in the range of 20-50 MPa. A feature of this earthquake is the large number (more than 200) of valley blocking landslides it generated. This was partly due to the steep and confined slopes in the area and the widely distributed strong ground shaking. The largest landslide dam has an approximate volume of 12(±2) M m3 and the debris from this travelled about 2.7 km2 downslope where it formed a dam blocking the Hapuku River. The long-term stability of cracked slopes and landslide dams from future strong earthquakes and large rainstorms are an ongoing concern to central and local government agencies responsible for rebuilding homes and infrastructure. A particular concern is the potential for debris floods to affect downstream assets and infrastructure should some of the landslide dams breach catastrophically. At least twenty-one faults ruptured to the ground surface or sea floor, with these surface ruptures extending from the Emu Plain in North Canterbury to offshore of Cape Campbell in Marlborough. The mapped landslide distribution reflects the complexity of the earthquake rupture. Landslides are distributed across a broad area of intense ground shaking reflective of the elongate area affected by fault rupture, and are not clustered around the earthquake epicentre. The largest landslides triggered by the earthquake are located either on or adjacent to faults that ruptured to the ground surface. Surface faults may provide a plane of weakness or hydrological discontinuity and adversely oriented surface faults may be indicative of the location of future large landslides. Their location appears to have a strong structural geological control. Initial results from our landslide investigations suggest predictive models relying only on ground-shaking estimates underestimate the number and size of the largest landslides that occurred.</p