Testing gravity with motion of satellites around galaxies: Newtonian gravity against Modified Newtonian Dynamics

The motion of satellite galaxies around normal galaxies at distances 50-500 kpc provides a sensitive test for the theories. We study the surface density and the velocities of satellites around isolated galaxies in the Sloan Digital Sky Survey. We find that the surface number-density of satellites declines with the projected distance as a power law with the slope -1.5-2. The rms velocities gradually decline: observations exclude constant velocities at a 10 sigma level. We show that observational data strongly favor the standard model: all three major statistics of satellites - the number-density profile, the line-of-sight velocity dispersion, and the distribution function of the velocities -- agree remarkably well with the predictions of the standard cosmological model. Thus, that the success of the standard model extends to scales (50-500) kpc, much lower than what was previously considered. MOND fails on these scales for models which assume any single power-law number-density profile of satellites and any constant velocity anisotropy by predicting nearly constant rms velocities of satellites. Satellite data can be fit by fine-tuned models, which require (1) specific non-power-law density profile, (2) very radial orbits at large distances (velocity anisotropy beta =0.6-0.7 at 200-300 kpc), and (3) 2-2.5 times more stellar mass than what is found in the galaxies. The external gravity force - a necessary component for MOND -- makes the situation even worse. We argue that a combination of satellite data and observational constraints on stellar masses make these models very problematic.Comment: 14 pages, 7 figures. Accepted for publication in Ap

Improving access to a multi-component intervention for caregivers and people with dementia

Acknowledgements We thank staff and volunteers from Voluntary Service Aberdeen, Forget Me Not Club, NHS Grampian, Alzheimer’s Scotland, Quarrier’s Carer Support, and Aberdeenshire Council who participated as trainers, and Zahid Quayyum at the Health Economics Research Unit of the University of Aberdeen who contributed to the economic analysis. Funding The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Aberdeenshire Change Fund (Study 1), NHS Grampian Carers Information Strategy and Alzheimer Scotland (Study 2).Peer reviewedPostprin

Effect of stress and temperature on the optical properties of silicon nitride membranes at 1550 nm

Future gravitational-wave detectors operated at cryogenic temperatures are expected to be limited by thermal noise of the highly reflective mirror coatings. Silicon nitride is an interesting material for such coatings as it shows very low mechanical loss, a property related to low thermal noise, which is known to further decrease under stress. Low optical absorption is also required to maintain the low mirror temperature. Here, we investigate the effect of stress on the optical properties at 1,550 nm of silicon nitride membranes attached to a silicon frame. Our approach includes the measurement of the thermal expansion coefficient and the thermal conductivity of the membranes. The membrane and frame temperatures are varied, and translated into a change in stress using finite element modeling. The resulting product of the optical absorption and thermo-optic coefficient (dn/dT) is measured using photothermal common-path interferometry

Anomalous optical surface absorption in nominally pure silicon samples at 1550 nm

The announcement of the direct detection of Gravitational Waves (GW) by the LIGO and Virgo collaboration in February 2016 has removed any uncertainty around the possibility of GW astronomy. It has demonstrated that future detectors with sensitivities ten times greater than the Advanced LIGO detectors would see thousands of events per year. Many proposals for such future interferometric GW detectors assume the use of silicon test masses. Silicon has low mechanical loss at low temperatures, which leads to low displacement noise for a suspended interferometer mirror. In addition to the low mechanical loss, it is a requirement that the test masses have a low optical loss. Measurements at 1550 nm have indicated that material with a low enough bulk absorption is available; however there have been suggestions that this low absorption material has a surface absorption of > 100 ppm which could preclude its use in future cryogenic detectors. We show in this paper that this surface loss is not intrinsic but is likely to be a result of particular polishing techniques and can be removed or avoided by the correct polishing procedure. This is an important step towards high gravitational wave detection rates in silicon based instruments

Optical absorption of ion-beam sputtered amorphous silicon coatings

Low mechanical loss at low temperatures and a high index of refraction should make silicon optimally suited for thermal noise reduction in highly reflective mirror coatings for gravitational wave detectors. However, due to high optical absorption, amorphous silicon (aSi) is unsuitable for being used as a direct high-index coating material to replace tantala. A possible solution is a multimaterial design, which enables exploitation of the excellent mechanical properties of aSi in the lower coating layers. The possible number of aSi layers increases with absorption reduction. In this work, the optimum heat treatment temperature of aSi deposited via ion-beam sputtering was investigated and found to be 450 °C. For this temperature, the absorption after deposition of a single layer of aSi at 1064 nm and 1550 nm was reduced by more than 80%

Mapping the optical absorption of a substrate-transferred crystalline AlGaAs coating at 1.5 µm

The sensitivity of 2nd and 3rd generations of interferometric gravitational wave detectors will be limited by thermal noise of the test-mass mirrors and highly reflective coatings. Recently developed crystalline coatings show a promising thermal noise reduction compared to presently used amorphous coatings. However, stringent requirements apply to the optical properties of the coatings as well. We have mapped the optical absorption of a crystalline AlGaAs coating which is optimized for high reflectivity for a wavelength of 1064nm. The absorption was measured at 1550nm where the coating stack transmits approximately 70% of the laser light. The measured absorption was lower than (30.2 +/- 11.1)ppm which is equivalent to (3.6 +/- 1.3)ppm for a coating stack that is highly reflective at 1530nm. While this is a very promising low absorption result for alternative low--loss coating materials, further work will be necessary to reach the requirements of <1ppm for future gravitational wave detectors. Jessica Steinlechner, Iain W Martin, Angus Bell, Garrett Cole, Jim Hough, Steven Penn, Sheila Rowan, Sebastian Steinlechne

Isolated and non-isolated dwarfs in terms of modified Newtonian dynamics

Within the framework of modified Newtonian dynamics (MOND) we investigate the kinematics of two dwarf spiral galaxies belonging to very different environments, namely KK 246 in the Local Void and Holmberg II in the M81 group. A mass model of the rotation curve of KK 246 is presented for the first time, and we show that its observed kinematics are consistent with MOND. We re-derive the outer rotation curve of Holmberg II, by modelling its HI data cube, and find that its inclination should be closer to face-on than previously derived. This implies that Holmberg II has a higher rotation velocity in its outer parts, which, although not very precisely constrained, is consistent with the MOND prediction.Comment: Accepted in A&A as a Research Note. 6 pages, 3 figure

Galactic kinematics with modified Newtonian dynamics

We look for observational signatures that could discriminate between Newtonian and modified Newtonian (MOND) dynamics in the Milky Way, in view of the advent of large astrometric and spectroscopic surveys. Indeed, a typical signature of MOND is an apparent disk of "phantom" dark matter, which is uniquely correlated with the visible disk-density distribution. Due to this phantom dark disk, Newtonian models with a spherical halo have different signatures from MOND models close to the Galactic plane. The models can thus be differentiated by measuring dynamically (within Newtonian dynamics) the disk surface density at the solar radius, the radial mass gradient within the disk, or the velocity ellipsoid tilt angle above the Galactic plane. Using the most realistic possible baryonic mass model for the Milky Way, we predict that, if MOND applies, the local surface density measured by a Newtonist will be approximately 78 Msun/pc2 within 1.1 kpc of the Galactic plane, the dynamically measured disk scale-length will be enhanced by a factor of 1.25 with respect to the visible disk scale-length, and the local vertical tilt of the velocity ellipsoid at 1 kpc above the plane will be approximately 6 degrees. None of these tests can be conclusive for the present-day accuracy of Milky Way data, but they will be of prime interest with the advent of large surveys such as GAIA.Comment: 5 page

Effects of static and dynamic higher-order optical modes in balanced homodyne readout for future gravitational waves detectors

With the recent detection of Gravitational waves (GW), marking the start of the new field of GW astronomy, the push for building more sensitive laser-interferometric gravitational wave detectors (GWD) has never been stronger. Balanced homodyne detection (BHD) allows for a quantum noise (QN) limited readout of arbitrary light field quadratures, and has therefore been suggested as a vital building block for upgrades to Advanced LIGO and third generation observatories. In terms of the practical implementation of BHD, we develop a full framework for analyzing the static optical high order modes (HOMs) occurring in the BHD paths related to the misalignment or mode matching at the input and output ports of the laser interferometer. We find the effects of HOMs on the quantum noise limited sensitivity is independent of the actual interferometer configuration, e.g. Michelson and Sagnac interferometers are effected in the same way. We show that misalignment of the output ports of the interferometer (output misalignment) only effects the high frequency part of the quantum noise limited sensitivity (detection noise). However, at low frequencies, HOMs reduce the interferometer response and the radiation pressure noise (back action noise) by the same amount and hence the quantum noise limited sensitivity is not negatively effected in that frequency range. We show that the misalignment of laser into the interferometer (input misalignment) produces the same effect as output misalignment and additionally decreases the power inside the interferometer. We also analyze dynamic HOM effects, such as beam jitter created by the suspended mirrors of the BHD. Our analyses can be directly applied to any BHD implementation in a future GWD. Moreover, we apply our analytical techniques to the example of the speed meter proof of concept experiment under construction in Glasgow. We find that for our experimental parameters, the performance of our seismic isolation system in the BHD paths is compatible with the design sensitivity of the experiment

Peptidyl-prolyl cis-trans isomerases (immunophilins) and their roles in parasite biochemistry, host-parasite interaction and antiparasitic drug action.

Immunophilin is the collective name given to the cyclophilin and FK506-binding protein (FKBP) families. As the name suggests, these include the major binding proteins of certain immunosuppressive drugs: cyclophilins for the cyclic peptide cyclosporin A and FKBPs for the macrolactones FK506 and rapamycin. Both families, although dissimilar in sequence, possess peptidyl-prolyl <i>cis-trans</i> isomerase activity in vitro and can play roles in protein folding and transport, RNA splicing and the regulation of multiprotein complexes in cells. In addition to enzymic activity, many immunophilins act as molecular chaperones. This property may be conferred by the isomerase domain and/or by additional domains. Recent years have seen a great increase in the number of known immunophilin genes in parasitic protozoa and helminths and in many cases their products have been characterized biochemically and their temporal and spatial expression patterns have been examined. Some of these genes represent novel types: one example is a <i>Toxoplasma gondii</i> gene encoding a protein with both cyclophilin and FKBP domains. Likely roles in protein folding and oligomerisation, RNA splicing and sexual differentiation have been suggested for parasite immunophilins. In addition, unexpected roles in parasite virulence (Mip FKBP of <i>Trypanosoma cruzi</i>) and host immuno-modulation (e.g. 18-kDa cyclophilin of <i>Toxoplasma gondii</i>) have been established. Furthermore, in view of the potent antiparasitic activities of cyclosporins, macrolactones and nonimmunosuppressive derivatives of these compounds, immunophilins may mediate drug action and/or may themselves represent potential drug targets. Investigation of the mechanisms of action of these agents may lead to the design of potent and selective antimalarial and other antiparasitic drugs. This review discusses the properties of immunophilins in parasites and the 'animal model' <i>Caenorhabditis elegans</i> and relates these to our understanding of the roles of these proteins in cellular biochemistry, host-parasite interaction and the antiparasitic mechanisms of the drugs that bind to them