Investigation of the Effect of Biodiesel Blends on Fuel Injection Pumps based on Vibration and Pressure Measurements

Amongst alternative fuels for diesel-engine application, biodiesel is very attractive because it is biodegradable, an environmentally-friendly and sustainable source that can meet future energy demands. However, there are few published studies of the impact of biodiesel fuel and its blends on fuel injection pumps (FIPs). This study will investigate the influence of biodiesels derived from waste cooking oils with incremental blends of B10, B20, B30, B40 and B100. The FIP in this study is a rotary type attached to a four-cylinder, four-stroke direct injection, turbocharged diesel engine. Vibration and pressure measurements were made on the FIP. The results show the peak pressure close to the pump increases slightly the higher the proportion of biodiesel because of increased viscosity, density and bulk modulus of the fuel. Low frequency vibration increased as the proportion of biodiesel increased. These results demonstrate an increase in dynamic load on the pump components. However, high frequency vibration levels are lowest for the blends B10, B20 and B30, which may be helpful for improving the service life of the delivery

An explicit height bound for the classical modular polynomial

For a prime m, let Phi_m be the classical modular polynomial, and let h(Phi_m) denote its logarithmic height. By specializing a theorem of Cohen, we prove that h(Phi_m) <= 6 m log m + 16 m + 14 sqrt m log m. As a corollary, we find that h(Phi_m) <= 6 m log m + 18 m also holds. A table of h(Phi_m) values is provided for m <= 3607.Comment: Minor correction to the constants in Theorem 1 and Corollary 9. To appear in the Ramanujan Journal. 17 pages

3D printed fluidics with embedded analytic functionality for automated reaction optimisation

Additive manufacturing or ‘3D printing’ is being developed as a novel manufacturing process for the production of bespoke micro- and milliscale fluidic devices. When coupled with online monitoring and optimisation software, this offers an advanced, customised method for performing automated chemical synthesis. This paper reports the use of two additive manufacturing processes, stereolithography and selective laser melting, to create multifunctional fluidic devices with embedded reaction monitoring capability. The selectively laser melted parts are the first published examples of multifunctional 3D printed metal fluidic devices. These devices allow high temperature and pressure chemistry to be performed in solvent systems destructive to the majority of devices manufactured via stereolithography, polymer jetting and fused deposition modelling processes previously utilised for this application. These devices were integrated with commercially available flow chemistry, chromatographic and spectroscopic analysis equipment, allowing automated online and inline optimisation of the reaction medium. This set-up allowed the optimisation of two reactions, a ketone functional group interconversion and a fused polycyclic heterocycle formation, via spectroscopic and chromatographic analysis

Transcriptomic, lipid, and histological profiles suggest changes in health in fish from a pesticide hot spot.

Barramundi (Lates calcarifer) were collected at the beginning (1st sampling) and end (2nd sampling) of the wet season from Sandy Creek, an agriculturally impacted catchment in the Mackay Whitsundays region of the Great Barrier Reef catchment area, and from Repulse Creek, located approximately 100 km north in Conway National Park, to assess the impacts of pesticide exposure. Gill and liver histology, lipid class composition in muscle, and the hepatic transcriptome were examined. The first sample of Repulse Creek fish showed little tissue damage and low transcript levels of xenobiotic metabolism enzymes. Sandy Creek fish showed altered transcriptomic patterns, including those that regulate lipid metabolism, xenobiotic metabolism, and immune response; gross histological alterations including lipidosis; and differences in some lipid classes. The second sampling of Repulse Creek fish showed similar alterations in hepatic transcriptome and tissue structure as fish from Sandy Creek. These changes may indicate a decrease in health of pesticide exposed fish

Charged AdS Black Holes and Catastrophic Holography

We compute the properties of a class of charged black holes in anti-de Sitter space-time, in diverse dimensions. These black holes are solutions of consistent Einstein-Maxwell truncations of gauged supergravities, which are shown to arise from the inclusion of rotation in the transverse space. We uncover rich thermodynamic phase structures for these systems, which display classic critical phenomena, including structures isomorphic to the van der Waals-Maxwell liquid-gas system. In that case, the phases are controlled by the universal `cusp' and `swallowtail' shapes familiar from catastrophe theory. All of the thermodynamics is consistent with field theory interpretations via holography, where the dual field theories can sometimes be found on the world volumes of coincident rotating branes.Comment: 19 pages, revtex, psfig, 6 multicomponent figures, typos, references and a few remarks have been repaired, and adde

Combinatorial activity of flavonoids with antibiotics against drug resistant Staphylococcus aureus

The use of resistance-modifying agents is a potential strategy that is used to prolong the effective life of antibiotics in the face of increasing antibiotic resistance. Since certain flavonoids are potent bacterial efflux pump inhibitors, we assessed morin, rutin, quercetin, hesperidin, and (+)-catechin for their combined activity with the antibiotics ciprofloxacin, tetracycline, erythromycin, oxacillin, and ampicillin against drug-resistant strains of Staphylococcus aureus, including methicillin-resistant S. aureus. Four established methods were used to determine the combined efficacy of each combination: microdilution checkerboard assays, time-kill determinations, the Etest, and dual disc-diffusion methods. The cytotoxicity of the flavonoids was additionally evaluated in a mouse fibroblast cell line. Quercetin and its isomer morin decreased by 3- to 16-fold the minimal inhibitory concentration of ciprofloxacin, tetracycline, and erythromycin against some S. aureus strains. Rutin, hesperidin, and (+)-catechin did not promote any potentiation of antibiotics. Despite the potential cytotoxicity of these phytochemicals at a high concentration (fibroblast IC50 of 41.8 and 67.5mg/L, respectively), quercetin is commonly used as a supplement for several therapeutic purposes. All the methods, with exception of the time-kill assay, presented a high degree of congruence without any apparent strain specificity.This work was supported by Operational Program for Competitiveness Factors—COMPETE, FCT/MEC (PIDDAC), and FEDER through Projects Bioresist—PTDC/EBB-EBI/ 105085/2008; Phytodisinfectants—PTDC/DTP-SAP/1078/ 2012 (COMPETE: FCOMP-01-0124-FEDER-028765) and the PhD grants awarded to Ana Abreu (SFRH/BD/84393/ 2012) and Anabela Borges (SFRH/BD/63398/2009). The authors are very grateful to Professor Simon Gibbons (De- partment of Pharmaceutical and Biological Chemistry, The School of Pharmacy, UCL School of Pharmacy, London) for providing the bacterial strains.info:eu-repo/semantics/publishedVersio

Bailing Out the Milky Way: Variation in the Properties of Massive Dwarfs Among Galaxy-Sized Systems

Recent kinematical constraints on the internal densities of the Milky Way's dwarf satellites have revealed a discrepancy with the subhalo populations of simulated Galaxy-scale halos in the standard CDM model of hierarchical structure formation. This has been dubbed the "too big to fail" problem, with reference to the improbability of large and invisible companions existing in the Galactic environment. In this paper, we argue that both the Milky Way observations and simulated subhalos are consistent with the predictions of the standard model for structure formation. Specifically, we show that there is significant variation in the properties of subhalos among distinct host halos of fixed mass and suggest that this can reasonably account for the deficit of dense satellites in the Milky Way. We exploit well-tested analytic techniques to predict the properties in a large sample of distinct host halos with a variety of masses spanning the range expected of the Galactic halo. The analytic model produces subhalo populations consistent with both Via Lactea II and Aquarius, and our results suggest that natural variation in subhalo properties suffices to explain the discrepancy between Milky Way satellite kinematics and these numerical simulations. At least ~10% of Milky Way-sized halos host subhalo populations for which there is no "too big to fail" problem, even when the host halo mass is as large as M_host = 10^12.2 h^-1 M_sun. Follow-up studies consisting of high-resolution simulations of a large number of Milky Way-sized hosts are necessary to confirm our predictions. In the absence of such efforts, the "too big to fail" problem does not appear to be a significant challenge to the standard model of hierarchical formation. [abridged]Comment: 12 pages, 3 figures; accepted by JCAP. Replaced with published versio

Measurement of the Michel Parameters in Leptonic Tau Decays

The Michel parameters of the leptonic tau decays are measured using the OPAL detector at LEP. The Michel parameters are extracted from the energy spectra of the charged decay leptons and from their energy-energy correlations. A new method involving a global likelihood fit of Monte Carlo generated events with complete detector simulation and background treatment has been applied to the data recorded at center-of-mass energies close to sqrt(s) = M(Z) corresponding to an integrated luminosity of 155 pb-1 during the years 1990 to 1995. If e-mu universality is assumed and inferring the tau polarization from neutral current data, the measured Michel parameters are extracted. Limits on non-standard coupling constants and on the masses of new gauge bosons are obtained. The results are in agreement with the V-A prediction of the Standard Model.Comment: 32 pages, LaTeX, 9 eps figures included, submitted to the European Physical Journal

A Measurement of the Product Branching Ratio f(b->Lambda_b).BR(Lambda_b->Lambda X) in Z0 Decays

The product branching ratio, f(b->Lambda_b).BR(Lambda_b->Lambda X), where Lambda_b denotes any weakly-decaying b-baryon, has been measured using the OPAL detector at LEP. Lambda_b are selected by the presence of energetic Lambda particles in bottom events tagged by the presence of displaced secondary vertices. A fit to the momenta of the Lambda particles separates signal from B meson and fragmentation backgrounds. The measured product branching ratio is f(b->Lambda_b).BR(Lambda_b->Lambda X) = (2.67+-0.38(stat)+0.67-0.60(sys))% Combined with a previous OPAL measurement, one obtains f(b->Lambda_b).BR(Lambda_b->Lambda X) = (3.50+-0.32(stat)+-0.35(sys))%.Comment: 16 pages, LaTeX, 3 eps figs included, submitted to the European Physical Journal

Ventilation for swine

Cover title