6,215 research outputs found
Method and system for near-field spectroscopy using targeted deposition of nanoparticles
There is provided in one embodiment of the invention a method for analyzing a sample material using surface enhanced spectroscopy. The method comprises the steps of imaging the sample material with an atomic force microscope (AFM) to select an area of interest for analysis, depositing nanoparticles onto the area of interest with an AFM tip, illuminating the deposited nanoparticles with a spectrometer excitation beam, and disengaging the AFM tip and acquiring a localized surface enhanced spectrum. The method may further comprise the step of using the AFM tip to modulate the spectrometer excitation beam above the deposited nanoparticles to obtain improved sensitivity data and higher spatial resolution data from the sample material. The invention further comprises in one embodiment a system for analyzing a sample material using surface enhanced spectroscopy
A very high accuracy potential energy surface for H3
An exact quantum Monte Carlo (EQMC) method was used to calculate the potential energy surface (PES) for the ground electronic state of H3 over a grid of about 76000 nuclear geometries. The absolute abinitio statistical or sampling error of the calculation was ±0.01 kcal mol^-1 for energies (V) smaller than 3 eV. This PES was fitted by a three-dimensional cubic spline method and the fitting accuracy was determined from a set of 3684 randomly selected nuclear geometries not used in the fitting. For the range V3 eV the rms fitting error was ±0.010 kcal mol^-1, and the absolute value of the corresponding maximum error was 0.018 kcal mol^-1. This fitted EQMC PES is an order of magnitude more accurate than the best PES previously obtained for this system. Detailed comparisons are made with previous PESs, for the more dynamically important nuclear configurations
Hunters of the Shining Mountains| The history of hunting on the Western Slope of the Colorado Front Range
Near-Field Spectroscopy with Nanoparticles Deposited by AFM
An alternative approach to apertureless near-field optical spectroscopy involving an atomic-force microscope (AFM) entails less complexity of equipment than does a prior approach. The alternative approach has been demonstrated to be applicable to apertureless near-field optical spectroscopy of the type using an AFM and surface enhanced Raman scattering (SERS), and is expected to be equally applicable in cases in which infrared or fluorescence spectroscopy is used. Apertureless near-field optical spectroscopy is a means of performing spatially resolved analyses of chemical compositions of surface regions of nanostructured materials. In apertureless near-field spectroscopy, it is common practice to utilize nanostructured probe tips or nanoparticles (usually of gold) having shapes and dimensions chosen to exploit plasmon resonances so as to increase spectroscopic-signal strengths. To implement the particular prior approach to which the present approach is an alternative, it is necessary to integrate a Raman spectrometer with an AFM and to utilize a special SERS-active probe tip. The resulting instrumentation system is complex, and the tasks of designing and constructing the system and using the system to acquire spectro-chemical information from nanometer-scale regions on a surface are correspondingly demanding
Atomic Force Microscope Mediated Chromatography
The atomic force microscope (AFM) is used to inject a sample, provide shear-driven liquid flow over a functionalized substrate, and detect separated components. This is demonstrated using lipophilic dyes and normal phase chromatography. A significant reduction in both size and separation time scales is achieved with a 25-micron-length column scale, and one-second separation times. The approach has general applications to trace chemical and microfluidic analysis. The AFM is now a common tool for ultra-microscopy and nanotechnology. It has also been demonstrated to provide a number of microfluidic functions necessary for miniaturized chromatography. These include injection of sub-femtoliter samples, fluidic switching, and sheardriven pumping. The AFM probe tip can be used to selectively remove surface layers for subsequent microchemical analysis using infrared and tip-enhanced Raman spectroscopy. With its ability to image individual atoms, the AFM is a remarkably sensitive detector that can be used to detect separated components. These diverse functional components of microfluidic manipulation have been combined in this work to demonstrate AFM mediated chromatography. AFM mediated chromatography uses channel-less, shear-driven pumping. This is demonstrated with a thin, aluminum oxide substrate and a non-polar solvent system to separate a mixture of lipophilic dyes. In conventional chromatographic terms, this is analogous to thin-layer chromatography using normal phase alumina substrate with sheardriven pumping provided by the AFM tip-cantilever mechanism. The AFM detection of separated components is accomplished by exploiting the variation in the localized friction of the separated components. The AFM tip-cantilever provides the mechanism for producing shear-induced flows and rapid pumping. Shear-driven chromatography (SDC) is a relatively new concept that overcomes the speed and miniaturization limitations of conventional liquid chromatography. SDC is based on a sliding plate system, consisting of two flat surfaces, one of which has a recessed channel. A fluid flow is produced by axially sliding one plate past another, where the fluid has mechanical shear forces imposed at each point along the channel length. The shear-induced flow rates are very reproducible, and do not have pressure or voltage gradient limitations. SDC opens up a new range of enhanced separation kinetics by permitting the sample confinement with submicron dimensions. Small, highly confined liquid is advantageous for chromatographic separation because the separation rate is known to scale according to the square of the confined sample diameter. In addition, because shear-driven flows are not limited by fluid velocity, shear-driven liquid chromatography may provide up to 100,000 plate efficiency
Surface-Enhanced Raman Scattering Using Silica Whispering-Gallery Mode Resonators
The motivation of this work was to have robust spectroscopic sensors for sensitive detection and chemical analysis of organic and molecular compounds. The solution is to use silica sphere optical resonators to provide surface-enhanced spectroscopic signal. Whispering-gallery mode (WGM) resonators made from silica microspheres were used for surface-enhanced Raman scattering (SERS) without coupling to a plasmonic mechanism. Large Raman signal enhancement is observed by exclusively using 5.08-micron silica spheres with 785-nm laser excitation. The advantage of this non-plasmonic approach is that the active substrate is chemically inert silica, thermally stable, and relatively simple to fabricate. The Raman signal enhancement is broadly applicable to a wide range of molecular functional groups including aliphatic hydrocarbons, siloxanes, and esters. Applications include trace organic analysis, particularly for in situ planetary instruments that require robust sensors with consistent response
Systems Architecting Heuristics for Systems Engineering Management and Embedded Systems Engineering
Software development for United States Air Force (USAF) weapon systems is a right here, right now prize captured by those who can rapidly develop requirements and deliver a quality product. The Air Logistics Centers (ALCs) located at Tinker Air Force Base (AFB), Oklahoma, Warner-Robins AFB, Georgia, and Hill AFB, Utah develop requirements utilizing 3400 funding to capture this prize. The ALCs identify these requirements as corrective maintenance or perfective and adaptive maintenance. Colleen A. Calimer and John L. BeVier introduce the concept of the Embedded Systems Engineer in their 2004 INCOSE paper Embedded Systems Engineering: Managing Systems Complexity, Change, and Crises . They present the case that insightful management and utilization of the embedded systems engineer is the critical component of successful engineering activity in the dynamic systems environment. This paper applies systems architecting heuristics to systems engineering management to suggest that embedded systems engineering is functionally beneficial to the operational demands of maintaining the capability of the Avionics Flight Software (AFS) of the B-1B strategic bomber weapon system
AIRE expands: new roles in immune tolerance and beyond
More than 15 years ago, mutations in the autoimmune regulator (AIRE) gene were identified as the cause of autoimmune polyglandular syndrome type 1 (APS1). It is now clear that this transcription factor has a crucial role in promoting self-tolerance in the thymus by regulating the expression of a wide array of self-antigens that have the commonality of being tissue-restricted in their expression pattern in the periphery. In this Review, we highlight many of the recent advances in our understanding of the complex biology that is related to AIRE, with a particular focus on advances in genetics, molecular interactions and the effect of AIRE on thymic selection of regulatory T cells. Furthermore, we highlight new areas of biology that are potentially affected by this key regulator of immune tolerance
Recommended from our members
Longitudinal Effects of Supplemental Forage on the Honey Bee (Apis mellifera) Microbiota and Inter- and Intra-Colony Variability
Synthesis and Characterization of Three-Coordinate Ni(III)-Imide Complexes
A new family of low-coordinate nickel imides supported by 1,2-bis(di-tert-butylphosphino)ethane was synthesized. Oxidation of nickel(II) complexes led to the formation of both aryl- and alkyl-substituted nickel(III)-imides, and examples of both types have been isolated and fully characterized. The aryl substituent that proved most useful in stabilizing the Ni(III)-imide moiety was the bulky 2,6-dimesitylphenyl. The two Ni(III)-imide compounds showed different variable-temperature magnetic properties but analogous EPR spectra at low temperatures. To account for this discrepancy, a low-spin/high-spin equilibrium was proposed to take place for the alkyl-substituted Ni(III)-imide complex. This proposal was supported by DFT calculations. DFT calculations also indicated that the unpaired electron is mostly localized on the imide nitrogen for the Ni(III) complexes. The results of reactions carried out in the presence of hydrogen donors supported the findings from DFT calculations that the adamantyl substituent was a significantly more reactive hydrogen-atom abstractor. Interestingly, the steric properties of the 2,6-dimesitylphenyl substituent are important not only in protecting the Ni═N core but also in favoring one rotamer of the resulting Ni(III)-imide, by locking the phenyl ring in a perpendicular orientation with respect to the NiPP plane
- …