2,000 research outputs found
Effects of Partial Homogenization of Milk on Yield and Quality of Cheddar Cheese
In the past decade, the cheese industry in the United States (US) has grown rapidly, with cheese sales increasing by 33% (36). The cheese industry, in 1983, utilized 29.2% of total US milkfat supply as compared to 20.3% utilization in 1973 (36). Compared to the total cheese production of 2,059,2Z8 kg (4,539,822 lb) in 1982, 2,185,611 kg (4,818,449 lb) of cheese were manufactured in 1983 in the .US (36). The increased production of cheese was made possible by modifications in the cheese making process and advent of modern equipment; and it was fostered by increased demand .and higher prices. One of the recent concepts in the cheese industry is use of preconcentrated milk for cheese making. Preconcentration of cheesemilk lessens the problems related to whey disposal. With reduced bulk and increased solids level in the raw material, increase in cheese production can be attained without increase in labor or equipment. Research also has indicated increased cheese yields can be obtained by preconcentrating cheesemilk (6). Since ultrafiltration is not legal for treating milk to be used in Cheddar cheese manufacture, vacuum concentration is employed. Vacuum concentration of milk involves considerable amount of agitation by pumping. This physical abuse of milk has a shattering effect on milk fat globules, which is similar in nature to homogenization, but not to as great an extent. Since the natural distribution of milk fat globules and milk proteins is modified by homogenization, it is presumed that this process modifies the properties of cheese curd. Even though some researchers (15,30,38) found increased cheese yields with homogenized milk, the reports (18,39) of its adverse effects on flavor and body of cheese cast doubt on the feasibility of homogenization of milk in Cheddar cheese making. As earlier research with homogenized milk was not totally applicable to cheese making with the modern equipment used in the dairy industry, it seemed practical to investigate the effects of homogenization of milk at various pressures on the properties of the resultant Cheddar cheese during making and curing
Flavor development in lactic fermentation of ultrafiltered cottage cheese whey
Fermented dairy products based on ultrafiltered proteins often seem lacking in flavor particularly if the protein is washed by diafiltration. A model system based on protein collected from cottage cheese whey was used to investigate this phenomenon;The whey proteins were concentrated 10-fold by ultrafiltration through a membrane with 30,000 MW cutoff, diluted 1:1 with water and reconcentrated to a final concentration of 6-7% of the initial whey volume. This resulted in approximately 15-fold concentration of whey. The whey protein concentrate was diluted to 3.5% protein, various constituents were added, and the mixtures fermented with Leuconostoc dextranicum for 16 h at 32°C. The fermented samples were heat-coagulated in a water bath at 90°C for 10 min and cooled to room temperature. The resulting products were evaluated for flavor by a trained panel, who tasted three replicates of each sample;Retentate diluted with distilled water lacked flavor and developed a gritty texture after fermentation and coagulation. When permeate was used to dilute the whey protein before fermentation, the product had a much more intense flavor than when water was used as a diluent;Various techniques were used to isolate and identify components of whey permeate that were responsible for flavor development in the mixture. Constituents in the permeate that were important for flavor development were: ions (sodium, potassium, calcium, magnesium, phosphorus, chlorine, and citrate), dihydroxyacetone, lactose, and acetic acid. Addition of dihydroxyacetone prior to fermentation increased the production of glyoxal, methylglyoxal, and diacetyl as detected by high performance liquid chromatography
Dynamic reasoning in a knowledge-based system
Any space based system, whether it is a robot arm assembling parts in space or an onboard system monitoring the space station, has to react to changes which cannot be foreseen. As a result, apart from having domain-specific knowledge as in current expert systems, a space based AI system should also have general principles of change. This paper presents a modal logic which can not only represent change but also reason with it. Three primitive operations, expansion, contraction and revision are introduced and axioms which specify how the knowledge base should change when the external world changes are also specified. Accordingly the notion of dynamic reasoning is introduced, which unlike the existing forms of reasoning, provide general principles of change. Dynamic reasoning is based on two main principles, namely minimize change and maximize coherence. A possible-world semantics which incorporates the above two principles is also discussed. The paper concludes by discussing how the dynamic reasoning system can be used to specify actions and hence form an integral part of an autonomous reasoning and planning system
Resource Devolution from the Centre to States: Enhancing the Revenue Capacity of States for Implementation of Essential Health Interventions
Access to adequate health care services is an important component of empowering people with human capital. This, however, can be achieved only when the spending on health care is adequate and delivery systems efficient. Improving health indicators is an important component of the Millennium Development Goals (MDGs) set by the United Nations. There are also important targets on health status achievements set for the Tenth Plan. The Common Minimum Programme of the ruling UPA government also seeks to increase the public expenditure by the Centre and States on health and family welfare schemes from the present level of less than 1% to 2%-3% of the gross domestic product (GDP). The provision of health and family welfare services falls in the realm of concurrent responsibility of the Centre and the States, but the latter have a predominant role in the delivery of these services. However, fiscal pressures at the State level lead to compression of expenditures by the State Governments resulting in an increase in Central financing of these services, particularly for some prioritized programmes implemented through the Centre and Centrally sponsored schemes. Thus, over 85% of the public expenditure on medical and public health is incurred by the State Governments, though the proportion of financing the expenditure by the State Governments is lower. This paper identifies the resource gap between the desired and the actual health expenditure in 15 major States in India (14 large, non-special category States and Assam), and highlights the extent to which the gap can be reduced by augmenting resources at the State level. Further, it estimates the resource gap that cannot be met through States’ own resources and therefore, requires Central transfers. The design of Central transfers needed for meeting the required health expenditure of various States is also discussed.Federal Transfers to Provinces; Public Expenditure on Health
Machining of Tungsten Heavy Alloy under Cryogenic Environment
AbstractThe machining of tungsten heavy alloy is very difficult as it has high strength and hardness, which requires special cutting tools and cutting process. Though carbide tools are extensively used in conventional cutting, these lead take high machining time and tool failures which cause to decrease in productivity. To overcome the above, special techniques are being practiced in machining of tungsten alloys, one such technique is machining under cryogenic environment. In this paper, liquid nitrogen is used as coolant in machining of tungsten heavy alloys, because it is cost effective, safe, non flammable and environmental friendly gas, in addition to that it cannot contaminate the work piece and no separate mechanism required for disposal. An experimental investigation has been carried out on machining of tungsten heavy alloys by the solid carbide cutting tools under cryogenic and conventional coolants. The material removal rate, surface integrity and cutting forces were studied for both the coolants. The chip morphology also measured for evaluation of shear stress and shear strain. The cryogenic coolant has enhanced the machinability of tungsten heavy alloys. It is observed that the material removal rate was three times higher in cryogenic cooling method when compared with conventional coolant method and the surface finish of the machined surfaces are extremely good and the magnitude of cutting forces are lesser in cryogenic coolant
Research Notes : United States : Screening for cytoplasmic/maternal effects in resistance to soybean cyst nematode
With the discovery of soybean cyst nematode (SCN) in the U.S. in 1954, the research for resistance was initiated. Ross and Brim (1957) identified several soybean plant introductions resistant to the North Carolina SCN populations. Epps and Hartwig (1972) reported PI lines resistant to race 4
Electrical and Magnetic behaviour of PrFeAsO0.8F0.2 superconductor
The superconducting and ground state samples of PrFeAsO0.8F0.2 and PrFeAsO
have been synthesised via easy and versatile single step solid state reaction
route. X-ray & Reitveld refine parameters of the synthesised samples are in
good agreement to the earlier reported value of the structure. The ground state
of the pristine compound (PrFeAsO) exhibited a metallic like step in
resistivity below 150K followed by another step at 12K. The former is
associated with the spin density wave (SDW) like ordering of Fe spins and later
to the anomalous magnetic ordering for Pr moments. Both the resistivity
anomalies are absent in case of superconducting PrFeAsO0.8F0.2 sample. Detailed
high field (up to 12Tesla) electrical and magnetization measurements are
carried out for superconducting PrFeAsO0.8F0.2 sample. The PrFeAsO0.8F0.2
exhibited superconducting onset (Tconset) at around 47K with Tc({\rho} =0) at
38K. Though the Tconset remains nearly invariant, the Tc({\rho} =0) is
decreased with applied field, and the same is around 23K under applied field of
12Tesla. The upper critical field (Hc2) is estimated from the Ginzburg Landau
equation (GL) fitting, which is found to be ~ 182Tesla. Critical current
density (Jc) being calculated from high field isothermal magnetization (MH)
loops with the help of Beans critical state model, is found to be of the order
of 103 A/cm2. Summarily, the superconductivity characterization of single step
synthesised PrFeAsO0.8F0.2 superconductor is presented.Comment: 15 Pages Text + Fig
The carboxyl terminal mutational hotspot of the ciliary disease protein RPGRORF15 (retinitis pigmentosa GTPase regulator) is glutamylated in vivo
Mutations inRPGR(ORF15)(retinitis pigmentosa GTPase regulator) are a major cause of inherited retinal degenerative diseases. RPGR(ORF15)(1152 residues) is a ciliary protein involved in regulating the composition and function of photoreceptor cilia. The mutational hotspot in RPGR(ORF15)is an unusual C-terminal domain encoded by exon ORF15, which is rich in polyglutamates and glycine residues (Glu-Gly domain) followed by a short stretch of basic amino acid residues (RPGR(C2)domain; residues 1072-1152). However, the properties of the ORF15-encoded domain and its involvement in the pathogenesis of the disease are unclear. Here we show that RPGR(ORF15)is glutamylated at the C-terminus, as determined by binding to GT335, which recognizes glutamylated substrates. This reactivity is lost in two mouse mutants ofRpgr, which do not express RPGR(ORF15)due to disease-causing mutations in exon ORF15. Our results indicate that RPGR(ORF15)is posttranslationally glutamylated in the Glu-Gly domain and that the GT335 antibody predominantly recognizes RPGR(ORF15)in photoreceptor cilia
A Mathematical Model for Neutrophil Gradient Sensing and Polarization
Directed cell migration in response to chemical cues, also known as chemotaxis, is an important physiological process involved in wound healing, foraging, and the immune response. Cell migration requires the simultaneous formation of actin polymers at the leading edge and actomyosin complexes at the sides and back of the cell. An unresolved question in eukaryotic chemotaxis is how the same chemoattractant signal determines both the cell's front and back. Recent experimental studies have begun to reveal the biochemical mechanisms necessary for this polarized cellular response. We propose a mathematical model of neutrophil gradient sensing and polarization based on experimentally characterized biochemical mechanisms. The model demonstrates that the known dynamics for Rho GTPase and phosphatidylinositol-3-kinase (PI3K) activation are sufficient for both gradient sensing and polarization. In particular, the model demonstrates that these mechanisms can correctly localize the “front” and “rear” pathways in response to both uniform concentrations and gradients of chemical attractants, including in actin-inhibited cells. Furthermore, the model predictions are robust to the values of many parameters. A key result of the model is the proposed coincidence circuit involving PI3K and Ras that obviates the need for the “global inhibitors” proposed, though never experimentally verified, in many previous mathematical models of eukaryotic chemotaxis. Finally, experiments are proposed to (in)validate this model and further our understanding of neutrophil chemotaxis
- …