The neglected influence of zinc oxide light-soaking on stability measurements of inverted organic solar cells

Although zinc oxide (ZnO) is one of the most commonly used materials for electron transport layers in organic solar cells (OSCs), it also comes with disadvantages such as the so-called light-soaking issues, i.e., its need for exposure to UV light to reach its full potential in OSCs. Here, the impact of ZnO light-soaking issues on stability measurements of OSCs is investigated. It is found that in the absence of UV light a reversible degradation occurs, which is independent of the used active layer material and accelerates at higher temperatures but can be undone with a short UV exposure. This reversible aging is attributed to the re-adsorption of oxygen, which for manufacturing reasons is trapped at the interface of ZnO, even in an oxygen-free environment. This oxygen can be removed with a UV pretreatment of the ZnO but at the expense of device efficiency and production that has to take place in an oxygen-free environment. This study establishes that stability measurements of ZnO-containing OSCs must be performed exclusively with a light source including a UV part since the usage of a simple white light source - as often reported in the literature - can lead to erroneous results

Organizational culture, leadership style and effectiveness: A case study of middle eastern construction clients

During the last few decades, organizational effectiveness has received a great deal of attention in many industrial sectors. As a result, a variety of models have been formulated which measure organizational performance. In the construction industry, two factors have subsequently captured the imagination and interest of researchers and practitioners alike: the culture of the organization and the leadership style of project managers. This focus places a requirement upon construction organizations to recognize and understand their organizational culture, and equally, to clearly communicate it to their employees as part of their capitalist drive of constantly improving performance, productivity and profit. Traditional ways of conducting construction business require a sound understanding of the technical and managerial demands of executing projects, which in turn, places an increased emphasis upon the management and leadership competencies of individual project managers. The purpose of the research is to explore the relationship between organizational culture, authentic leadership style and effectiveness within the context of a case study investigation centred on Middle Eastern construction clients and their project managers. The outcomes of the investigation, which include the presentation of an explanatory model, indicate that organizational culture is directly and positively related to performance and effectiveness, while project managers' leadership style has an indirect relationship to effectiveness. A strong organizational culture is therefore deemed critical to organizational performance

Increasing Photostability of Inverted Nonfullerene Organic Solar Cells by using Fullerene Derivative Additives

Organic solar cells (OSCs) recently achieved efficiencies of over 18% and are well on their way to practical applications, but still considerable stability issues need to be overcome. One major problem emerges from the electron transport material zinc oxide (ZnO), which is mainly used in the inverted device architecture and decomposes many high-performance nonfullerene acceptors due to its photocatalytic activity. In this work, we add three different fullerene derivatives—PC71BM, ICMA, and BisPCBM—to an inverted binary PBDB-TF:IT-4F system in order to suppress the photocatalytic degradation of IT-4F on ZnO via the radical scavenging abilities of the fullerenes. We demonstrate that the addition of 5% fullerene not only increases the performance of the binary PBDB-TF:IT-4F system but also significantly improves the device lifetime under UV illumination in an inert atmosphere. While the binary devices lose 20% of their initial efficiency after only 3 h, this time is increased fivefold for the most promising ternary devices with ICMA. We attribute this improvement to a reduced photocatalytic decomposition of IT-4F in the ternary system, which results in a decreased recombination. We propose that the added fullerenes protect the IT-4F by acting as a sacrificial reagent, thereby suppressing the trap state formation. Furthermore, we show that the protective effect of the most promising fullerene ICMA is transferable to two other binary systems PBDB-TF:BTP-4F and PTB7-Th:IT-4F. Importantly, this effect can also increase the air stability of PBDB-TF:IT-4F. This work demonstrates that the addition of fullerene derivatives is a transferable and straightforward strategy to improve the stability of OSCs

The neglected influence of zinc oxide light‐soaking on stability measurements of inverted organic solar cells

Although zinc oxide (ZnO) is one of the most commonly used materials for electron transport layers in organic solar cells (OSCs), it also comes with disadvantages such as the so‐called light‐soaking issues, i.e., its need for exposure to UV light to reach its full potential in OSCs. Here, the impact of ZnO light‐soaking issues on stability measurements of OSCs is investigated. It is found that in the absence of UV light a reversible degradation occurs, which is independent of the used active layer material and accelerates at higher temperatures but can be undone with a short UV exposure. This reversible aging is attributed to the re‐adsorption of oxygen, which for manufacturing reasons is trapped at the interface of ZnO, even in an oxygen‐free environment. This oxygen can be removed with a UV pretreatment of the ZnO but at the expense of device efficiency and production that has to take place in an oxygen‐free environment. This study establishes that stability measurements of ZnO‐containing OSCs must be performed exclusively with a light source including a UV part since the usage of a simple white light source – as often reported in the literature – can lead to erroneous results

Favorable Mixing Thermodynamics in Ternary Polymer Blends for Realizing High Efficiency Plastic Solar Cells

Ternary blends with broad spectral absorption have the potential to increase charge generation in organic solar cells but feature additional complexity due to limited intermixing and electronic mismatch. Here, a model system comprising the polymers poly[5,5-bis(2-butyloctyl)-(2,2-bithiophene)-4,4-dicarboxylate-alt-5,5-2,2-bithiophene] (PDCBT) and PTB7-Th and PC70BM as an electron accepting unit is presented. The power conversion efficiency (PCE) of the ternary system clearly surpasses the performance of either of the binary systems. The photophysics is governed by a fast energy transfer process from PDCBT to PTB7-Th, followed by electron transfer at the PTB7-Th:fullerene interface. The morphological motif in the ternary blend is characterized by polymer fibers. Based on a combination of photophysical analysis, GIWAXS measurements and calculation of the intermolecular parameter, the latter indicating a very favorable molecular affinity between PDCBT and PTB7-Th, it is proposed that an efficient charge generation mechanism is possible because PTB7-Th predominantly orients around PDCBT filaments, allowing energy to be effectively relayed from PDCBT to PTB7-Th. Fullerene can be replaced by a nonfullerene acceptor without sacrifices in charge generation, achieving a PCE above 11%. These results support the idea that thermodynamic mixing and energetics of the polymer-polymer interface are critical design parameter for realizing highly efficient ternary solar cells with variable electron acceptors

Real-time evaluation of thin film drying kinetics using an advanced, multi-probe optical setup

Solution-processed organic photovoltaic devices are advantageous due to their low-cost large area manufacturing techniques, such as slot-die coating, gravure printing and roll-to-roll coating. The final microstructure of a polymer:fullerene bulk-heterojunction (BHJ) film is a fine interplay between solution thermodynamics (e.g. solubility, miscibility…) and kinetics (e.g. solvent evaporation, polymer ordering, phase separation…) during the drying process. In order to design better performing organic photovoltaic devices, gaining knowledge over the drying properties of polymer:fullerene thin films is essential. A novel in situ thin film drying characterization chamber, equipped with white-light reflectometry, laser light scattering and photoluminescence, is presented in combination with grazing-incidence X-ray diffraction on two different polymer:fullerene bulk heterojunctions based on poly-(3-hexylthiophene-2,5-diyl) (P3HT) and polythieno[3,2b]thiophene-diketopyrrolopyrrole-co-thiophene (DPP-TT-T) polymers. With photoluminescence applied for the first time as an in situ method for such drying studies, these single-chamber measurements track the fine interplay between thermodynamics and kinetics of thin film drying and provide invaluable information on solution behavior and microstructure formation

A Novel Multi‐Functional Thiophene‐Based Organic Cation as Passivation, Crystalline Orientation, and Organic Spacer Agent for Low‐Dimensional 3D/1D Perovskite Solar Cells

Recently, the mixed-dimensional (3D/2D or 3D/1D) perovskite solar cells using small organic spacers have attracted interest due to their outstanding long-term stability. Here, a new type of thiophene-based organic cation 2-(thiophene-2yl-)pyridine-1-ium iodide (ThPyI), which is used to fabricate mixed-dimensional 3D/1D perovskite solar cells, is presented. The ThPyI-based 1D perovskitoid is applied as a passivator on top of a 3D methyl ammonium lead iodide (MAPI) to fabricate surface-passivated 3D/1D perovskite films or added alone into the 3D perovskite precursor to generate bulk-passivated 3D MAPI. The 1D perovskitoid acts as a passivating agent at the grain boundaries of surface-passivated 3D/1D, which improves the power conversion efficiency (PCE) of the solar cells. Grazing incidence wide-angle X-ray scattering (GIWAXS) studies confirm that ThPyI triggers the preferential orientation of the bulk MAPI slabs, which is essential to enhance charge transport. Champion bulk-passivated 3D and surface-passivated 3D/1D devices yield 14.10% and 19.60% PCE, respectively. The bulk-passivated 3D offers favorable stability, with 84% PCE retained after 2000 h without encapsulation. This study brings a new perspective to the design of organic spacers having a different binding motif and a passivation strategy to mitigate the impact of defects in hybrid 3D/1D perovskite solar cells

Organic and perovskite solar modules innovated by adhesive top electrode and depth-resolved laser patterning

We demonstrate an innovative solution-processing fabrication route for organic and perovskite solar modules via depth-selective laser patterning of an adhesive top electrode. This yields unprecedented power conversion efficiencies of up to 5.3% and 9.8%, respectively. We employ a PEDOT:PSS–Ag nanowire composite electrode and depth-resolved post-patterning through beforehand laminated devices using ultra-fast laser scribing. This process affords low-loss interconnects of consecutive solar cells while overcoming typical alignment constraints. Our strategy informs a highly simplified and universal approach for solar module fabrication that could be extended to other thin-film photovoltaic technologies