Reliability of III-V concentrator solar cells

III–V concentrator solar cells are starting to be commercialized. However, no complete studies about their reliability have been carried out. A review about both the accelerated ageing tests and real time tests developed till now is presented. A proposal about the required tests is also done. In this stage, the tests show that III–V concentrator cells are robust devices with MTTFs well over the expected ones (30 years)

Modeling of GaInP/GaAs dual junction solar cells including tunnel junction

This paper presents research efforts conducted at the IES-UPM in the development of an accurate, physically-based solar cell model using the generalpurpose ATLASR device simulator by Silvaco. Unlike solar cell models based on a combination of discrete electrical components, this novel model extracts the electrical characteristics of a solar cell based on virtual fabrication of its physical structure, allowing for direct manipulation of materials, dimensions, and dopings. As single junction solar cells simulation was yet achieved, the next step towards advanced simulations of multi-junction cells (MJC) is the simulation of the tunnel diodes, which interconnect the subcells in a monolithic MJC. The first results simulating a Dual- Junction (DJ) GaInP/GaAs solar cells are shown in this paper including a complete Tunnel Junction (TJ) model and the resonant cavity effect occurring in the bottom cell. Simulation and experimental results were compared in order to test the accuracy of the models employed

One-watt fiber-based power-by-light system for satellite applications

In this work, a fiber-based optical powering (or power-by-light) system capable of providing more than 1 W is developed. The prototype was used in order to power a shunt regulator for controlling the activation and deactivation of solar panels in satellites. The work involves the manufacture of a light receiver (a GaAs multiple photovoltaic converter (MPC)), a power conditioning block, and a regulator and the implementation and characterization of the whole system. The MPC, with an active area of just 3.1 mm2, was able to supply 1 W at 5 V with an efficiency of 30%. The maximum measured device efficiency was over 40% at an input power (Pin) of 0.5 W. Open circuit voltage over 7 V was measured for Pin over 0.5 W. A system optoelectronic efficiency (including the optical fiber, connectors, and MPC) of 27% was measured at an output power (Pout) of 1 W. At Pout = 0.2 W, the efficiency was as high as 36%. The power conditioning block and the regulator were successfully powered with the system. The maximum supplied power in steady state was 0.2 W, whereas in transient state, it reached 0.44 W. The paper also describes the characterization of the system within the temperature range going from -70 to +100?°C

Tunnel diode modeling, including nonlocal trap-assisted tunneling: A focus on III-V multijunction solar cell simulation

Multijunction solar cells (MJCs) based on III-V semiconductors constitute the state-of-the-art approach for high-efficiency solar energy conversion. These devices, consisting of a stack of various solar cells, are interconnected by tunnel diodes. Reliable simulations of the tunnel diode behavior are still a challenge for solar cell applications. In this paper, a complete description of the model implemented in Silvaco ATLAS is shown, demonstrating the importance of local and nonlocal trap-assisted tunneling. We also explain how the measured doping profile and the metalization-induced series resistance influence the behavior of the tunnel diodes. Finally, we detail the different components of the series resistance and show that this can help extract the experimental voltage drop experienced by an MJC due to the tunnel junction. The value of this intrinsic voltage is important for achieving high efficiencies at concentrations near 1000 suns

Development and experimental evaluation of a complete solar thermophotovoltaic system

We present a practical implementation of a solar thermophotovoltaic (TPV) system. The system presented in this paper comprises a sunlight concentrator system, a cylindrical cup-shaped absorber/emitter (made of tungsten coated with HfO2), and an hexagonal-shaped water-cooled TPV generator comprising 24 germanium TPV cells, which is surrounding the cylindrical absorber/emitter. This paper focuses on the development of shingled TPV cell arrays, the characterization of the sunlight concentrator system, the estimation of the temperature achieved by the cylindrical emitters operated under concentrated sunlight, and the evaluation of the full system performance under real outdoor irradiance conditions. From the system characterization, we have measured short-circuit current densities up to 0.95 A/cm2, electric power densities of 67 mW/cm2, and a global conversion efficiency of about 0.8%. To our knowledge, this is the first overall solar-to-electricity efficiency reported for a complete solar thermophotovoltaic system. The very low efficiency is mainly due to the overheating of the cells (up to 120 °C) and to the high optical concentrator losses, which prevent the achievement of the optimum emitter temperature. The loss analysis shows that by improving both aspects, efficiencies above 5% could be achievable in the very short term and efficiencies above 10% could be achieved with further improvements

Optical Transmittance Maximization in Superior Performance Tunnel Junctions for Very High Concentration Applications.

The light transmission through a tunnel junction in a multijunction solar cell depends on the optical properties and thickness of the whole solar cell layers stack, which configure the light absorption, reflection and interference processes taking place inside the semiconductor structure. In this paper the focus is put on the AlGaAs barrier layers of p++AlGaAs/n++GaAs and p++AlGaAs/n++GaInP tunnel junctions inserted into a GaInP/GaAs dualjunction solar cell. The aim is to analyze the effect of the thickness and Al-composition of these barrier layers on the light transmittance of the tunnel junction, using the bottom cell Jsc as the merit figure to appraise it. An intricate relation between this Jsc and the barrier layers parameters, caused by interferential reflectance, was observed. The importance of an appropriate optical design of the semiconductor structure was corroborated by a non-negligible gain in the bottom cell Jsc when choosing the appropriate barrier layers Al-compositions and thicknesses from a range of practical values for which the optical absorption is not the main contributor to the optical losses

Detailed balance analysis of solar thermophotovoltaic systems made up of single junction photovoltaic cells and broadband thermal emitters

This paper presents a detailed balance analysis of a solar thermophotovoltaic system comprising an optical concentrator, a cut-off broad band absorber and emitter, and single junction photovoltaic cells working at the radiative limit with an integrated back-side reflector in a configuration in which the cells enclose the emitter to form an optical cavity. The analysis includes the effect of multiple variables on the system performance (efficiency and electrical power density), such as the concentration factor, the emitter-to-absorber area ratio, the absorber and emitter cut-off energies, the semiconductor band-gap energy and the voltage of the cells. Furthermore, the effect of optical losses within the cavity such as those attributed to a back-side reflector with reflectivity lower than one or to a semi-open optical cavity is also included. One of our main conclusions is that for a planar system configuration (the emitter, the cells and the absorber have the same area) the combination of low concentration and a spectrally selective absorber provides the highest system efficiencies. The efficiency limit of this kind of systems is 45.3%, which exceeds the Shockley–Queisser limit of 40.8% (obtained for a single junction solar cell, directly illuminated by the sun, working under maximum concentration and with an optimized band-gap). This system also has the great benefit of requiring a very low concentration factor of 4.4 suns

Global optimization of solar thermophotovoltaic systems

n this paper, we present a theoretical model based on the detailed balance theory of solar thermophotovoltaic systems comprising multijunction photovoltaic cells, a sunlight concentrator and spectrally selective surfaces. The full system has been defined by means of 2n + 8 variables (being n the number of sub-cells of the multijunction cell). These variables are as follows: the sunlight concentration factor, the absorber cut-off energy, the emitter-to-absorber area ratio, the emitter cut-off energy, the band-gap energy(ies) and voltage(s) of the sub-cells, the reflectivity of the cells' back-side reflector, the emitter-to-cell and cell-to-cell view factors and the emitter-to-cell area ratio. We have used this model for carrying out a multi-variable system optimization by means of a multidimensional direct-search algorithm. This analysis allows to find the set of system variables whose combined effects results in the maximum overall system efficiency. From this analysis, we have seen that multijunction cells are excellent candidates to enhance the system efficiency and the electrical power density. Particularly, multijunction cells report great benefits for systems with a notable presence of optical losses, which are unavoidable in practical systems. Also, we have seen that the use of spectrally selective absorbers, rather than black-body absorbers, allows to achieve higher system efficiencies for both lower concentration and lower emitter-to-absorber area ratio. Finally, we have seen that sun-to-electricity conversion efficiencies above 30% and electrical power densities above 50 W/cm2 are achievable for this kind of systems

Analysis of Chromatic Aberration Effects in Triple-Junction Solar Cells Using Advanced Distributed Models

The consideration of real operating conditions for the design and optimization of a multijunction solar cell receiver-concentrator assembly is indispensable. Such a requirement involves the need for suitable modeling and simulation tools in order to complement the experimental work and circumvent its well-known burdens and restrictions. Three-dimensional distributed models have been demonstrated in the past to be a powerful choice for the analysis of distributed phenomena in single- and dual-junction solar cells, as well as for the design of strategies to minimize the solar cell losses when operating under high concentrations. In this paper, we present the application of these models for the analysis of triple-junction solar cells under real operating conditions. The impact of different chromatic aberration profiles on the short-circuit current of triple-junction solar cells is analyzed in detail using the developed distributed model. Current spreading conditions the impact of a given chromatic aberration profile on the solar cell I-V curve. The focus is put on determining the role of current spreading in the connection between photocurrent profile, subcell voltage and current, and semiconductor layers sheet resistance

Energía Solar Termofotovoltaica

La energía solar fotovoltaica es una de las alternativas renovables más interesantes para afrontar el futuro energético del planeta desde el punto de vista de la sostenibilidad. Sin embargo, actualmente los sistemas fotovoltaicos comerciales son poco eficientes –aprovechan sólo el 10% de la radiación incidente– y económicamente menos atractivos que las fuentes de energía convencionales. En este trabajo se analizan las principales causas que limitan la eficiencia de conversión de radiación en electricidad y, tras ello, se presenta una novedosa línea de investigación basada en la utilización de sistemas termofotovoltaicos conjuntamente con concentradores solares, estrategia que permite incrementar la eficiencia de conversión hasta alcanzar valores por encima del 30%, algo fundamental para aumentar la competitividad de las técnicas fotovoltaicas. Por último se presenta el prototipo de Sistema Solar Termofotovoltaico que se está construyendo en el Instituto de Energía Solar en colaboración con los principales laboratorios de investigación europeos en la materia