Bond-slip analysis via a cohesive-zone model simulating damage, friction and interlocking

A recently proposed cohesive-zone model which effectively combines damage, friction and mechanical interlocking has been revisited and further validated by numerically simulating the pull-out test, from a concrete block, of a ribbed steel bar in the post-yield deformation range. The simulated response is in good agreement with experimental measurements of the bond slip characteristics in the post-yield range of deformed bars reported in the literature. This study highlights the main features of the model: with physically justified and relatively simple arguments, and within the sound framework of thermodynamics with internal variables, the model effectively separates the three main sources of energy dissipation, i.e. loss of adhesion, friction along flat interfaces and mechanical interlocking. This study provides further evidence that the proposed approach allows easier and physically clearer procedures for the determination of the model parameters of such three elementary mechanical behaviours, and makes possible their interpretation and measurement as separate material property, as a viable alternative to lumping these parameters into single values of the fracture energy. In particular, the proposed approach allows to consider a single value of the adhesion energy for modes I and II

Modeling uncertainty in mountain pine beetle management systems

This study attempts to introduce elements of data uncertainty into the Shore and Safranyik model for approximating risk and susceptibility ratings for Mountain Pine Beetle attack in the Morice Forest District of British Columbia, Canada. Data uncertainty is introduced into the modeling procedure by introducing attribute uncertainty and spatial (boundary) vagueness into representations of Forest Inventory Polygon data, an essential component of the Shore and Safranyik modeling system, for the purposes of assessing the effects of uncertainty on the results of the Shore and Safranyik susceptibility modeling procedure. Introducing uncertainty into the forest inventory data is done by introducing spatial vagueness to the discrete forest polygon data (accomplished using a geostatistical approach) as well as attribute uncertainty through a neighbourhood-based weighting algorithm, resulting in a forest inventory representation which incorporates both spatial and attribute uncertainty and can be incorporated into the Shore and Safranyik modeling procedure. The impacts of data uncertainty are assessed by comparing the results of the Shore and Safranyik model derived using representations of forest data which incorporates uncertainty, versus the use of traditional or discrete data inputs

Analysis of performance characteristics in ground effect of a large scale V/STOL multi-fan-in-wing transport model

Performance characteristics from static tests in ground effect of V/STOL transport mode

Determining If Two Solid Ellipsoids Intersect

An analytical method is presented for determining if two ellipsoids share the same volume. The formulation involves adding an extra dimension to the solutions space and examining eignevalues that are associated with degenerate quadric surfaces. The eigenvalue behavior is characterized and then demonstrated with an example. The same method is also used to determine if two ellipsoids appear to share the same projected area based on an observer\u27s viewing angle. The following approach yields direct results without approximation, iteration, or any form of numerical search. It is computationally efficient in the sense that no dimensional distortions, coordinate rotations, transformations, or eigenvector computations are needed

Determining If Two Ellipsoids Share the Same Volume

An analytical method is presented for determining if two ellipsoids share the same volume. The formulation involves adding an extra dimension to the solution space and examining eigenvalues that are associated with degenerate quadric surfaces. The eigenvalue behavior is characterized and then demonstrated with an example. The same method is also used to determine if two ellipsoids appear to share the same projected area based on an oberver\u27s viewing angle. The following approach yields direct results without approximation, iteration, or any form of numerical search. It is computationally efficient in the sense that no dimensional distortions, coordinate rotations, transformations, or eigenvector computations are needed

Experimental and numerical study of rate-dependent mode-I failure of a structural adhesive

Copyright © 2022 The Author(s).. We present an experimental and numerical study of the rate dependence of the mode-I failure of adhesive joints, focussing on aluminium plates bonded with Araldite® 2015. For the experimental part, we tested 24 double-cantilever beams (DCB) at six different prescribed speeds, from 0.1 to 5000 mm/min. The numerical simulations use a previously proposed cohesive-zone model (CZM) based on fractional viscoelasticity and a novel finite element combining a Timoshenko beam and an interface element. The CZM had previously been validated for a rubber interface, so here we present a procedure to identify its input parameters and validate its capability to predict the failure of joints made with an epoxy adhesive. An effective procedure is also developed to evaluate the dependence of the fracture energy on the crack speed without experimentally measuring the crack speed. The adhesive response was found to be markedly rate dependent. Within the range of tested speeds, the fracture energy of the adhesive more than doubles its value and the shape of the ‘fracture energy-crack speed’ curve resembles a sigmoidal shape, but more tests are needed at higher speeds to better determine the maximum value of the fracture energy and the actual shape of the complete curve.European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 701032

Influence of the state of light on the optically induced interparticle interaction

A general expression for the energy of interparticle interaction induced by an arbitrary mode of light is determined using quantum electrodynamics, and it is shown that the Casimir-Polder potential is included within this quantum result. Equations are also derived for the corresponding coupling induced by multimode number states of light, and the dependence of the pair energy on the Poynting vector and polarization state is determined. Attention is then focused on the interactions between particles trapped in counterpropagating coherent beams, both with and without interference, and it is shown that the results afford insights into the multiparticle structures that can be optically fabricated with counterpropagating input. Brief consideration is also given to the effect of squeezing the optical coherent state. Extending previous studies of optical binding in Laguerre-Gaussian beams, results are given for the case of particles trapped at radially different locations within the beam structure. Finally, consideration is given to interparticle interactions induced by broadband light, and it is shown how the length of optically fabricated particle chains can be controlled by the use of wavelength filters

Pruning biomass potential in Italy related to crop characteristics, agricultural practices and agro-climatic conditions

This work, developed under the EuroPruning Project, aims to look at relations between pruning biomass production and several factors related both to crop species and management. The aim is to find out mathematical relations that allow improvement of the biomass potential assessment. This is generally calculated using biomass production ratios. These ratios are variable due to the influence of several aspects. On the one hand there are crop characteristics—such as species, cultivar, and age—and on the other, crop management, which is often associated to local habits and conditions such as the training system, planting pattern, density, pruning methods, irrigation and climate. This work has been produced by gathering data from literature reviews and surveying. The subset of Italian records in the EuroPruning database consists of 70 records. Each record contains the biomass production ratio and eight agronomic variables. Additionally, a set of six climatic and agro-climatic groups of variables (in total 28 variables) have been added to each record. Moderate to good correlations have been found, especially with few climatic factors. As a result, two regression models are proposed for the evaluation of the vineyard and olive tree pruning biomass ratios for Italy, and applied to assess pruning biomass potential

Action Boundary Proximity Effects on Perceptual-Motor Judgments

INTRODUCTION: Designed as a more ecological measure of reaction times, the Perception-Action Coupling Task (PACT) has shown good reliability and within-subject stability. However, a lengthy testing period was required. Perceptual-motor judgments are known to be affected by proximity of the stimulus to the action boundary. The current study sought to determine the effects of action boundary proximity on PACT performance, and whether redundant levels of stimuli, eliciting similar responses, can be eliminated to shorten the PACT.METHODS: There were 9 men and 7 women who completed 4 testing sessions, consisting of 3 familiarization cycles and 6 testing cycles of the PACT. For the PACT, subjects made judgments on whether a series of balls presented on a tablet afford "posting" (can fit) through a series of apertures. There were 8 ratios of ball to aperture size (B-AR) presented, ranging from 0.2 to 1.8, with each ratio appearing 12 times (12 trials) per cycle. Reaction times and judgment accuracy were calculated, and averaged across all B-ARs. Ratios and individual trials within each B-AR were systematically eliminated. Variables were re-averaged, and intraclass correlation coefficients (ICC) and coefficients of variation (CVTE) were calculated in an iterative manner.RESULTS: With elimination of the 0.2 and 1.8 B-ARs, the PACT showed good reliability (ICC = 0.81-0.99) and consistent within-subject stability (CVTE = 2.2-14.7%). Reliability (ICC = 0.81-0.97) and stability (CVTE = 2.6-15.6%) were unaffected with elimination of up to 8 trials from each B-AR.DISCUSSION: The shortened PACT resulted in an almost 50% reduction in total familiarization/testing time required, significantly increasing usability.Johnson CD, LaGoy AD, Pepping G-J, Eagle SR, Beethe AZ, Bower JL, Alfano CA, Simpson RJ, Connaboy C. Action boundary proximity effects on perceptual-motor judgments. Aerosp Med Hum Perform. 2019; 90(12):1000-1008