Evaluation of Biological Activities of Chemically Synthesized Silver Nanoparticles

Silver nanoparticles were synthesized by the earlier reported methods. The synthesized nanoparticles were characterized using ultraviolet-visible spectrophotometry (UV/Vis), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and X-ray powder diffraction (XRD). The synthesized materials were also evaluated for their antibacterial activity against Gram positive and Gram negative bacterial strains. TEM micrograph showed the spherical morphology of AgNPs with size range of 40–60 nm. The synthesized nanoparticles showed a strong antimicrobial activity and their effect depends upon bacterial strain as AgNPs exhibited greater inhibition zone for Pseudomonas aeruginosa (19.1 mm) followed by Staphylococcus aureus (14.8 mm) and S. pyogenes (13.6 mm) while the least activity was observed for Salmonella typhi (12.5 mm) at concentration of 5 µg/disc. The minimum inhibitory concentration (MIC) of AgNPs against S. aureus was 2.5 µg/disc and less than 2.5 µg/disc for P. aeruginosa. These results suggested that AgNPs can be used as an effective antiseptic agent for infectious control in medical field

Comparative Catalytic Evaluation of Nano-ZrO x

This work reports the zirconia (ZrOx) nanoparticles doped MnCO3 catalysts prepared by facile and simple coprecipitation technique and the synthesis of zirconia-manganese carbonate [X% ZrOx–MnCO3] (where X% = 0–7%) catalyst which upon calcination at 400°C is converted to zirconia-manganese dioxide [1% ZrOx–MnO2] and when calcined at 500°C is converted to zirconia-manganic trioxide [1% ZrOx–Mn2O3]. A comparative catalytic study was performed to investigate the catalytic efficiency between carbonate and oxides for the selective oxidation of 1-phenylethanol by using molecular O2 as a clean oxidant. The influence of several parameters such as w/w% of ZrOx, reaction time, calcination temperature, catalyst amount, and reaction temperature has been thoroughly examined using oxidation of 1-phenylethanol as a model substrate. The 1% ZrOx–MnCO3 precalcined at 300°C exhibited the best catalytic efficiency. It was found that ZrOx nanoparticles also play an essential role in enhancing the effectiveness of the catalytic system for the aerobic oxidation of alcohols. Furthermore, the physical and chemical properties of synthesized catalysts were evaluated by microscopic and spectroscopic techniques. An extremely high specific activity of 40 mmol·g−1·h−1 with a 100% conversion of oxidation product and selectivity of >99% was achieved within extremely short reaction time (6 min)

Heterocyclic scaffolds: centrality in anticancer drug development

Cancer has been cursed for human beings for long time. Millions people lost their lives due to cancer. Despite of the several anticancer drugs available, cancer cannot be cured; especially at the late stages without showing any side effect. Heterocyclic compounds exhibit exciting medicinal properties including anticancer. Some market selling heterocyclic anticancer drugs include 5-flourouracil, methortrexate, doxorubicin, daunorubicin, etc. Besides, some natural products such as vinblastine and vincristine are also used as anticancer drugs. Overall, heterocyclic moeities have always been core parts in the expansion of anticancer drugs. This article describes the importance of heterocyclic nuclei in the development of anticancer drugs. Besides, the attempts have been made to discuss both naturally occurring and synthetic heterocyclic compounds as anticancer agents. In addition, some market selling anticancer heterocyclic compounds have been described. Moreover, the efforts have been made to discuss the mechanisms of actions and recent advances in heterocyclic compounds as anticancer agents. The current challenges and future prospectives of heterocyclic compounds have also been discussed. Finally, the suggestions for syntheses of effective, selective, fast and human friendly anticancer agents are discussed into the different section

Preperation of sodium alginate-based SA-g-poly(ITA-co-VBS)/RC hydrogel nanocomposites: And their application towards dye adsorption

A superabsorbent polymer, Sodium Alginate-g-Poly (Itaconic acid-co-Sodium 4-vinyl benzenesulfonate)/ Ricinus communis (SA-g-P(ITA-co-VBS)/ RC) hydrogel, was prepared by free-radical graft co-polymerization for sequestration of toxic malachite green (MG) dye as a cationic dye model. The surface morphological of shape and composition of the prepared hydrogel used have been characterized by FESEM, EDX, TEM, FTIR, X-ray diffraction XRD, and TGA. Optimizing the synthesis conditions for prepared a hydrogel with the highest swelling ratio have been studied, the results show that employing 0.08 g KPS and 0.09 g MBA, 1.0 g ITA, 2.0 g VBS, 1.0 g SA, and 1.0 g RC, the composites greatest swelling capacity in distilled water was 3400 %. It was discovered that the dye adsorption capacity of the polymer was greatly impacted by the monomer VBS level in the hydrogel, which gives it a better ability to swell. The porosity of the hydrogel spheres, thus significantly enhancing the MG adsorption capacity with the rate-limiting controlled by chemical adsorption, intraparticle diffusion, and film diffusion. Study the influence of different reaction conditions on the removal of MG dye from aqueous solution are adsorbent dose, pH, zero-point charge, temperature, thermodynamic adsorption, adsorption isotherm, and kinetic models have been done. Additionally, (SA-g-P(ITA-co-VBS)/RC) demonstrated strong MG dye adsorption capabilities and reusability in at least four adsorption-desorption cycles this process indicating its considerable potential for use as the adsorbent for dye removals from aqueous solution

Hydrazine High-Performance Oxidation and Sensing Using a Copper Oxide Nanosheet Electrocatalyst Prepared via a Foam-Surfactant Dual Template

This work demonstrates hydrazine electro-oxidation and sensing using an ultrathin copper oxide nanosheet (CuO-NS) architecture prepared via a versatile foam-surfactant dual template (FSDT) approach. CuO-NS was synthesised by chemical deposition of the hexagonal surfactant Brij®58 liquid crystal template containing dissolved copper ions using hydrogen foam that was concurrently generated by a sodium borohydride reducing agent. The physical characterisations of the CuO-NS showed the formation of a two-dimensional (2D) ultrathin nanosheet architecture of crystalline CuO with a specific surface area of ~39 m2/g. The electrochemical CuO-NS oxidation and sensing performance for hydrazine oxidation revealed that the CuO nanosheets had a superior oxidation performance compared with bare-CuO, and the reported state-of-the-art catalysts had a high hydrazine sensitivity of 1.47 mA/cm2 mM, a low detection limit of 15 μM (S/N = 3), and a linear concentration range of up to 45 mM. Moreover, CuO-NS shows considerable potential for the practical use of hydrazine detection in tap and bottled water samples with a good recovery achieved. Furthermore, the foam-surfactant dual template (FSDT) one-pot synthesis approach could be used to produce a wide range of nanomaterials with various compositions and nanoarchitectures at ambient conditions for boosting the electrochemical catalytic reactions

Modified Polyacrylic Acid-Zinc Composites: Synthesis, Characterization and Biological Activity

Polyacrylic acid (PAA) is an important industrial chemical, which has been extensively applied in various fields, including for several biomedical purposes. In this study, we report the synthesis and modification of this polymer with various phenol imides, such as succinimide, phthalimide and 1,8-naphthalimide. The as-synthesized derivatives were used to prepare polymer metal composites by the reaction with Zn+2. These composites were characterized by using various techniques, including NMR, FT-IR, TGA, SEM and DSC. The as-prepared PAA-based composites were further evaluated for their anti-microbial properties against various pathogens, which include both Gram-positive and Gram-negative bacteria and different fungal strains. The synthesized composites have displayed considerable biocidal properties, ranging from mild to moderate activities against different strains tested

Mixed Zinc/Manganese on Highly Reduced Graphene Oxide: A Highly Active Nanocomposite Catalyst for Aerial Oxidation of Benzylic Alcohols

Nanocomposites of highly reduced graphene oxide (HRG) and ZnOx nanoparticles doped manganese carbonate containing different percentages of HRG were prepared via a facile co-precipitation method. The prepared sample calcined at 300 °C yielded i.e., ZnOx(1%)–MnCO3/(X%)HRG (where X = 0–7), calcination at 400 °C and 500 °C, yielded different manganese oxides i.e., ZnOx(1%)–MnO2/(X%)HRG and ZnOx(1%)–Mn2O3/(X%)HRG respectively. The prepared catalyst were subjected to catalytic evaluation and a comparative catalytic study between carbonates and oxides for the liquid-phase aerobic oxidation of benzylic alcohols to corresponding aldehydes using molecular oxygen as an eco-friendly oxidant without adding additives or bases. The influence of various parameters such as percentage of HRG, reaction time, catalyst amount, calcination and reaction temperature was systematically examined to optimize reaction conditions using oxidation of benzyl alcohol as a substrate model. It was found that the catalytic performance is remarkably enhanced after using HRG as catalyst co-dopant for the aerobic oxidation of alcohols, possibly owing to the presence of carbon defects and oxygenated functional groups on HRG surface. The as-synthesized catalysts were characterized by SEM, EDX, XRD, Raman, TGA, BET, and FT-IR. Under optimal conditions, the catalyst with composition ZnOx(1%)–MnCO3/(1%)HRG calcined at 300 °C exhibited remarkable specific activity (57.1 mmol·g−1·h−1) with 100% conversion of benzyl alcohol and more than 99% product selectivity within extremely short time (7 min). The as-prepared catalyst was re-used up to five consecutive times without significant decrease in its activity and selectivity. To the best of our knowledge, the achieved specific activity is the highest so far compared to the earlier reported catalysts used for the benzyl alcohol oxidation. A wide range of substituted benzylic and aliphatic alcohols were selectively oxidized into their corresponding aldehydes with complete convertibility and selectivity in short reaction times without over-oxidation to the acids. Due to their significant low cost, superior reproducibility, excellent catalytic efficiency, the ZnOx(1%)–MnCO3/(X%)HRG nanocomposites possess several application prospect in other organic chemistry reactions

Pulicaria glutinosa Extract: A Toolbox to Synthesize Highly Reduced Graphene Oxide-Silver Nanocomposites

A green, one-step approach for the preparation of graphene/Ag nanocomposites (PE-HRG-Ag) via simultaneous reduction of both graphene oxide (GRO) and silver ions using Pulicaria glutinosa plant extract (PE) as reducing agent is reported. The plant extract functionalizes the surfaces of highly reduced graphene oxide (HRG) which helps in conjugating the Ag NPs to HRG. Increasing amounts of Ag precursor enhanced the density of Ag nanoparticles (NPs) on HRG. The preparation of PE-HRG-Ag nanocomposite is monitored by using ultraviolet–visible (UV-Vis) spectroscopy, powder X-ray diffraction (XRD), and energy dispersive X-ray (EDX). The as-prepared PE-HRG-Ag nanocomposities display excellent surface-enhanced Raman scattering (SERS) activity, and significantly increased the intensities of the Raman signal of graphene

Synthesis, Characterization, and Relative Study on the Catalytic Activity of Zinc Oxide Nanoparticles Doped MnCO3, –MnO2, and –Mn2O3 Nanocomposites for Aerial Oxidation of Alcohols

Zinc oxide nanoparticles doped manganese carbonate catalysts [X% ZnOx–MnCO3] (where X = 0–7) were prepared via a facile and straightforward coprecipitation procedure, which upon different calcination treatments yields different manganese oxides, that is, [X% ZnOx–MnO2] and [X% ZnOx–Mn2O3]. A comparative catalytic study was conducted to evaluate the catalytic efficiency between carbonates and oxides for the selective oxidation of secondary alcohols to corresponding ketones using molecular oxygen as a green oxidizing agent without using any additives or bases. The prepared catalysts were characterized by different techniques such as SEM, EDX, XRD, TEM, TGA, BET, and FTIR spectroscopy. The 1% ZnOx–MnCO3 calcined at 300°C exhibited the best catalytic performance and possessed highest surface area, suggesting that the calcination temperature and surface area play a significant role in the alcohol oxidation. The 1% ZnOx–MnCO3 catalyst exhibited superior catalytic performance and selectivity in the aerial oxidation of 1-phenylethanol, where 100% alcohol conversion and more than 99% product selectivity were obtained in only 5 min with superior specific activity (48 mmol·g−1·h−1) and 390.6 turnover frequency (TOF). The specific activity obtained is the highest so far (to the best of our knowledge) compared to the catalysts already reported in the literatures used for the oxidation of 1-phenylethanol. It was found that ZnOx nanoparticles play an essential role in enhancing the catalytic efficiency for the selective oxidation of alcohols. The scope of the oxidation process is extended to different types of alcohols. A variety of primary, benzylic, aliphatic, allylic, and heteroaromatic alcohols were selectively oxidized into their corresponding carbonyls with 100% convertibility without overoxidation to the carboxylic acids under base-free conditions