Design concepts for large reflector antenna structures

Practical approaches for establishing large, precise antenna reflectors in space are described. Reflector surfaces consisting of either solid panels or knitted mesh are considered. The approach using a deep articulated truss structure to support a mesh reflector is selected for detailed investigations. A new sequential deployment concept for the tetrahedral truss is explained. Good joint design is discussed, and examples are described both analytically and by means of demonstration models. The influence of curvature on the design and its vibration characteristics are investigated

Batten augmented triangular beam

The BAT (Batten-Augmented Triangular) BEAM is characterized by battens which are buckled in the deployed state, thus preloading the truss. The preload distribution is determined, and the effects of various external loading conditions are investigated. The conceptual design of a deployer is described and loads are predicted. The influence of joint imperfections on effective member stiffness is investigated. The beam is assessed structurally

Why does low intensity, long-day lighting promote growth in Petunia, Impatiens, and tomato?

Numerous reports demonstrate that low intensity, long-day (LD) lighting treatments can promote growth. However, there are conflicting suggestions as to the mechanisms involved. This study examines the responses of Petunia, Impatiens, and tomato to LD lighting treatments and concludes that no single mechanism can explain the growth promotion observed in each case. Petunia showed the most dramatic response to photoperiod; up to a doubling in dry weight (DW) as a result of increasing daylength from 8 h d–1 to 16 h d–1.This could be explained by an increase in specific leaf area (SLA) comparable to that seen with shading. At low photosynthetic photon flux densities (PPFD), the increased leaf area more than compensated for any loss in photosynthetic capacity per unit leaf area. In Petunia, the response may, in part, have also been due to changes in growth habit. Impatiens and tomato showed less dramatic increases in DW as a result of LD lighting, but no consistent effects on SLA or growth habit were observed. In tomato, increased growth was accompanied by increased chlorophyll content, but this had no significant effect on photosynthesis. In both species, increased growth may have been due to a direct effect of LD lighting on photosynthesis. This is contrary to the generally held view that light of approx. 3 – 4 μmol m–2 s–1 is unlikely to have any significant impact on net photosynthesis. Nevertheless, we show that the relationship between PPFD and net photosynthesis is non-linear at low light levels, and therefore low intensity LD lighting can offset respiration very efficiently. Furthermore, a small increase in photosynthesis will have a greater impact when ambient light levels are low

A methodology for exploiting parallelism in the finite element process

A methodology is described for developing a parallel system using a top down approach taking into account the requirements of the user. Substructuring, a popular technique in structural analysis, is used to illustrate this approach

Semianalytic modeling of aerodynamic shapes

Equations for the semianalytic representation of a class of surfaces that vary smoothly in cross-sectional shape are presented. Some methods of fitting together and superimposing such surfaces are described. A brief discussion is also included of the application of the theory in various contexts such as computerized lofting of aerodynamic surfaces and grid generation

The Ultimate Halo Mass in a LCDM Universe

In the far future of an accelerating LCDM cosmology, the cosmic web of large-scale structure consists of a set of increasingly isolated halos in dynamical equilibrium. We examine the approach of collisionless dark matter to hydrostatic equilibrium using a large N-body simulation evolved to scale factor a = 100, well beyond the vacuum--matter equality epoch, a_eq ~ 0.75, and 53/h Gyr into the future for a concordance model universe (Omega_m ~ 0.3, Omega_Lambda ~ 0.7). The radial phase-space structure of halos -- characterized at a < a_eq by a pair of zero-velocity surfaces that bracket a dynamically active accretion region -- simplifies at a > 10 a_eq when these surfaces merge to create a single zero-velocity surface, clearly defining the halo outer boundary, rhalo, and its enclosed mass, mhalo. This boundary approaches a fixed physical size encompassing a mean interior density ~ 5 times the critical density, similar to the turnaround value in a classical Einstein-deSitter model. We relate mhalo to other scales currently used to define halo mass (m200, mvir, m180b) and find that m200 is approximately half of the total asymptotic cluster mass, while m180b follows the evolution of the inner zero velocity surface for a < 2 but becomes much larger than the total bound mass for a > 3. The radial density profile of all bound halo material is well fit by a truncated Hernquist profile. An NFW profile provides a somewhat better fit interior to r200 but is much too shallow in the range r200 < r < rhalo.Comment: 5 pages, 3 figures, submitted to MNRAS letter

Efficient structures for geosynchronous spacecraft solar arrays. Phase 1, 2 and 3

Structural concepts for deploying and supporting lightweight solar-array blankets for geosynchronous electrical power are evaluated. It is recommended that the STACBEAM solar-array system should be the object of further study and detailed evaluation. The STACBEAM system provides high stiffness at low mass, and with the use of a low mass deployment mechanism, full structural properties can be maintained throughout deployment. The stowed volume of the STACBEAM is acceptably small, and its linear deployment characteristic allows periodic attachments to the solar-array blanket to be established in the stowed configuration and maintained during deployment

Design, development and use of the finite element machine

Some of the considerations that went into the design of the Finite Element Machine, a research asynchronous parallel computer are described. The present status of the system is also discussed along with some indication of the type of results that were obtained