Trace analysis of environmental matrices by large-volume injection and liquid chromatography-mass spectrometry

The time-honored convention of concentrating aqueous samples by solid-phase extraction (SPE) is being challenged by the increasingly widespread use of large-volume injection (LVI) liquid chromatography–mass spectrometry (LC–MS) for the determination of traces of polar organic contaminants in environmental samples. Although different LVI approaches have been proposed over the last 40 years, the simplest and most popular way of performing LVI is known as single-column LVI (SC-LVI), in which a large-volume of an aqueous sample is directly injected into an analytical column. For the purposes of this critical review, LVI is defined as an injected sample volume that is ≥10% of the void volume of the analytical column. Compared with other techniques, SC-LVI is easier to set up, because it requires only small hardware modifications to existing autosamplers and, thus, it will be the main focus of this review. Although not new, SC-LVI is gaining acceptance and the approach is emerging as a technique that will render SPE nearly obsolete for many environmental applications.In this review, we discuss: the history and development of various forms of LVI; the critical factors that must be considered when creating and optimizing SC-LVI methods; and typical applications that demonstrate the range of environmental matrices to which LVI is applicable, for example drinking water, groundwater, and surface water including seawater and wastewater. Furthermore, we indicate direction and areas that must be addressed to fully delineate the limits of SC-LVI

SPE and LC-MS/MS determination of 14 illicit drugs in surface waters from the Natural Park of L'Albufera (Valencia, Spain)

14 páginas, 4 figuras, 4 tablas.A simple and robust method using solid-phase extraction (SPE) and liquid chromatography tandem mass spectrometry (LC-MS/MS) for the simultaneous determination of 14 drugs of abuse and their metabolites (cocainics, amphetamine-like compounds, cannabinoids, and opiates) in surface waters has been developed. Seven SPE adsorbents (Oasis HLB, Oasis MCX, Oasis Wax, Supelselect HLB, Strata-X, Strata-XCW), amount of sorbent bed, water volume, and pH were investigated. The highest recoveries, as well as the simplest protocol, were obtained for Oasis HLB cartridges (6 mL/200 mg) using 250 mL of water. The proposed method was linear in a concentration range from 0.03-6 to 300-60,000 ng/L depending on the compound, with correlation coefficients higher than 0.998. Matrix effects have been studied in surface water samples, and several isotope-labeled internal standards have been evaluated as a way to compensate the signal suppression observed. Limits of detection (LODs) and quantification (LOQs) ranged from 0.01 to 1.54 ng/L and from 0.03 to 5.13 ng/L, respectively. Recoveries were 71-102% at the LOQ level and 77-104 at 50 ng/L. The intra-day and intermediate precisions were from 1% to 8% and from 2% to 11%, respectively. The present work reports for the first time the occurrence of drugs of abuse residues in surface water samples from the Natural Park of L'Albufera (Valencia, Spain). Codeine, cocaine, benzoylecgonine, ecgonine methylester, amphetamine, 3,4-methylendioxy methamphetamine, morphine, and methadone were quantified with median values of 11.10, 0.02, 5.59, 0.08, 0.21, 0.75 and 0.14 ng/L respectively, and 11-nor-9-carboxy-Delta 9-tetrahydrocannabinol was detected in one sample at levels < LOQ.This work has been supported by Spanish Ministry of Science and Innovation through the project Consolider-Ingenio 2010 CSD2009-00065 and by this Ministry together with the European Regional Development Funds (ERDF) (projects GCL2007-66687-C02-01/BOS, CGL2008-01693/BTE and the project Consolider-Ingenio 2010 CSD2009-00065). P.V.R thanks the Spanish Ministry of Science and Innovation for the FPI grant.We are also in debt to Supelco, Waters and Phenomenex for providing some free sample cartridges.Peer reviewe