Contemporary Prevalence of Byssinosis in Low- and Middle-Income Countries: A Systematic Review

We aimed to identify the contemporary prevalence of byssinosis through a systematic review. Medline, Web of Science, Embase, and Global Health databases were used to identify studies published in any language between 2000 and 2019, reporting primary data on byssinosis among adults. We used the Joanna Briggs Institute checklist to estimate the risk of bias in studies and undertook a qualitative, narrative data analysis. The review considered the prevalence of byssinosis, chest tightness, and airflow obstruction in textile workers in low- and middle-income countries (LMICs). We found 26 relevant studies that included 6930 workers across 12 countries. Most of the studies (n = 19) were from Asia, and seven from African countries. Twenty-five studies were cross-sectional surveys while one was a cohort study. The prevalence of byssinosis was reported by 18 studies, and ranged from 8% to 38%, without any clear associations, at the group level, between the prevalence of byssinosis and durations of workers’ exposures. Prevalence of chest tightness ranged between 4% and 58% and that of airflow obstruction between 10% and 30%. A strong correlation (r = 0.72) was found between prevalence of byssinosis and cotton dust levels. Our findings indicate that byssinosis remains a significant, contemporary problem in some parts of the textile sector in LMICs

Use of low-cost particle counters for cotton dust exposure assessment in textile mills in low- and middle-income countries

OBJECTIVE: There is a lack of consensus on methods for cotton dust measurement in the textile industry, and techniques vary between countries-relying mostly on cumbersome, traditional approaches. We undertook comparisons of standard, gravimetric methods with low-cost optical particle counters for personal and area dust measurements in textile mills in Pakistan. METHODS: We included male textile workers from the weaving sections of seven cotton mills in Karachi. We used the Institute of Occupational Medicine (IOM) sampler with a Casella Apex 2 standard pump and the Purple Air (PA-II-SD) for measuring personal exposures to inhalable airborne particles (n = 31). We used the Dylos DC1700 particle counter, in addition to the two above, for area-level measurements (n = 29). RESULTS: There were no significant correlations between the IOM and PA for personal dust measurements using the original (r = -0.15, P = 0.4) or log-transformed data (r = -0.32, P = 0.07). Similarly, there were no significant correlations when comparing the IOM with either of the particle counters (PA and Dylos) for area dust measurements, using the original (r = -0.07, P = 0.7; r = 0.10, P = 0.6) or log-transformed data (r = -0.09, P = 0.6; r = 0.07, P = 0.7). CONCLUSION: Our findings show a lack of correlation between the gravimetric method and the use of particle counters in both personal and area measurements of cotton dust, precluding their use for measuring occupational exposures to airborne dust in textile mills. There continues to be a need to develop low-cost instruments to help textile industries in low- and middle-income countries to perform cotton dust exposure assessment

The association of spirometric small airways obstruction with respiratory symptoms, cardiometabolic diseases, and quality of life: Results from the Burden of Obstructive Lung Disease (BOLD) study

Background: Spirometric small airways obstruction (SAO) is common in the general population. Whether spirometric SAO is associated with respiratory symptoms, cardiometabolic diseases, and quality of life (QoL) is unknown. Methods: Using data from the Burden of Obstructive Lung Disease study (N = 21,594), we defined spirometric SAO as the mean forced expiratory flow rate between 25 and 75% of the FVC (FEF25-75) less than the lower limit of normal (LLN) or the forced expiratory volume in 3 s to FVC ratio (FEV3/FVC) less than the LLN. We analysed data on respiratory symptoms, cardiometabolic diseases, and QoL collected using standardised questionnaires. We assessed the associations with spirometric SAO using multivariable regression models, and pooled site estimates using random effects meta-analysis. We conducted identical analyses for isolated spirometric SAO (i.e. with FEV1/FVC ≥ LLN). Results: Almost a fifth of the participants had spirometric SAO (19% for FEF25-75; 17% for FEV3/FVC). Using FEF25-75, spirometric SAO was associated with dyspnoea (OR = 2.16, 95% CI 1.77–2.70), chronic cough (OR = 2.56, 95% CI 2.08–3.15), chronic phlegm (OR = 2.29, 95% CI 1.77–4.05), wheeze (OR = 2.87, 95% CI 2.50–3.40) and cardiovascular disease (OR = 1.30, 95% CI 1.11–1.52), but not hypertension or diabetes. Spirometric SAO was associated with worse physical and mental QoL. These associations were similar for FEV3/FVC. Isolated spirometric SAO (10% for FEF25-75; 6% for FEV3/FVC), was also associated with respiratory symptoms and cardiovascular disease. Conclusion: Spirometric SAO is associated with respiratory symptoms, cardiovascular disease, and QoL. Consideration should be given to the measurement of FEF25-75 and FEV3/FVC, in addition to traditional spirometry parameters

The impact of surgical delay on resectability of colorectal cancer: An international prospective cohort study

AIM: The SARS-CoV-2 pandemic has provided a unique opportunity to explore the impact of surgical delays on cancer resectability. This study aimed to compare resectability for colorectal cancer patients undergoing delayed versus non-delayed surgery. METHODS: This was an international prospective cohort study of consecutive colorectal cancer patients with a decision for curative surgery (January-April 2020). Surgical delay was defined as an operation taking place more than 4 weeks after treatment decision, in a patient who did not receive neoadjuvant therapy. A subgroup analysis explored the effects of delay in elective patients only. The impact of longer delays was explored in a sensitivity analysis. The primary outcome was complete resection, defined as curative resection with an R0 margin. RESULTS: Overall, 5453 patients from 304 hospitals in 47 countries were included, of whom 6.6% (358/5453) did not receive their planned operation. Of the 4304 operated patients without neoadjuvant therapy, 40.5% (1744/4304) were delayed beyond 4 weeks. Delayed patients were more likely to be older, men, more comorbid, have higher body mass index and have rectal cancer and early stage disease. Delayed patients had higher unadjusted rates of complete resection (93.7% vs. 91.9%, P = 0.032) and lower rates of emergency surgery (4.5% vs. 22.5%, P < 0.001). After adjustment, delay was not associated with a lower rate of complete resection (OR 1.18, 95% CI 0.90-1.55, P = 0.224), which was consistent in elective patients only (OR 0.94, 95% CI 0.69-1.27, P = 0.672). Longer delays were not associated with poorer outcomes. CONCLUSION: One in 15 colorectal cancer patients did not receive their planned operation during the first wave of COVID-19. Surgical delay did not appear to compromise resectability, raising the hypothesis that any reduction in long-term survival attributable to delays is likely to be due to micro-metastatic disease

Use of Low-Cost Particle Counters for Cotton Dust Exposure Assessment in Textile Mills in Low- and Middle-Income Countries

Objective: There is a lack of consensus on methods for cotton dust measurement in the textile industry, and techniques vary between countries - relying mostly on cumbersome, traditional approaches. We undertook comparisons of standard, gravimetric methods with low-cost optical particle counters for personal and area dust measurements in textile mills in Pakistan. Methods: We included male textile workers from the weaving sections of seven cotton mills in Karachi. We used the Institute of Occupational Medicine (IOM) sampler with a Casella Apex 2 standard pump and the Purple Air (PA-II-SD) for measuring personal exposures to inhalable airborne particles (n = 31). We used the Dylos DC1700 particle counter, in addition to the two above, for area-level measurements (n = 29). Results: There were no significant correlations between the IOM and PA for personal dust measurements using the original (r = -0.15, P = 0.4) or log-transformed data (r = -0.32, P = 0.07). Similarly, there were no significant correlations when comparing the IOM with either of the particle counters (PA and Dylos) for area dust measurements, using the original (r = -0.07, P = 0.7; r = 0.10, P = 0.6) or log-transformed data (r = -0.09, P = 0.6; r = 0.07, P = 0.7). Conclusion: Our findings show a lack of correlation between the gravimetric method and the use of particle counters in both personal and area measurements of cotton dust, precluding their use for measuring occupational exposures to airborne dust in textile mills. There continues to be a need to develop low-cost instruments to help textile industries in low- and middle-income countries to perform cotton dust exposure assessmen

Impact of using different predictive equations on the prevalence of chronic byssinosis in textile workers in Pakistan

OBJECTIVE: Byssinosis remains a significant problem among textile workers in low/middle-income countries. Here we share our experience of using different prediction equations for assessing 'chronic' byssinosis according to the standard WHO classification using measurements of forced expiratory volume in 1 s (FEV1). METHODS: We enrolled 1910 workers in a randomised controlled trial of an intervention to improve the health of textile workers in Pakistan. We included in analyses the 1724 (90%) men who performed pre-bronchodilator spirometry tests of acceptable quality. We compared four different equations for deriving lung function percentage predicted values among those with symptoms-based byssinosis: the third US National Health and Nutrition Examination Survey (NHANES-III, with 'North Indian and Pakistani' conversion factor); the Global Lung Function Initiative (GLI, 'other or mixed ethnicities'); a recent equation derived from survey of a western Indian population; and one based on an older and smaller survey of Karachi residents. RESULTS: 58 men (3.4%) had symptoms-based byssinosis according to WHO criteria. Of these, the proportions with a reduced FEV1 (&lt;80% predicted) identified using NHANES and GLI; Indian and Pakistani reference equations were 40%, 41%, 14% and 12%, respectively. Much of this variation was eliminated when we substituted FEV1/forced vital capacity (FVC) ratio

MultiTex RCT - a multifaceted intervention package for protection against cotton dust exposure among textile workers - a cluster randomized controlled trial in Pakistan: study protocol

Background: In the Pakistani textile industry the prevalence of workplace respiratory illnesses, including byssinosis, is high. The MultiTex RCT study aims to determine the effectiveness of a multifaceted intervention package in reducing dust levels in cotton mills, decreasing the frequency of respiratory symptoms among cotton textile workers, and improving their lung function. Methods/design: We will conduct a cluster-randomized controlled trial at 28 textile mills in Karachi. The intervention will comprise: training in occupational health for all workers and managers reinforced by regular refresher sessions; the formation of workplace committees to draw up, agree and promote a health and safety plan that includes wet mopping, safe disposal of cotton dust, and the use of simple face-masks, as well as further publicity about the risks from cotton dust; and provision of adequate supplies of face-masks to support the health and safety plan. Participating mills will be randomized to intervention and control arms following a baseline survey. The impact of the intervention will be determined through follow-up surveys conducted at 3, 12 and 18 months. Data collection in the surveys will include spirometry, questionnaire-based interviews and cotton-dust measurements. Discussion: If successful, the study may pave the way for simple, low-cost interventions that can help reduce cotton-dust levels in textile mills, and improve the respiratory health of textile workers in developing countries such as Pakistan. Trial registration: ClinicalTrials.gov, ID: NCT03738202. Registered on 12 November 2018

Chronic airflow obstruction attributable to poverty in the multinational Burden of Obstructive Lung Disease (BOLD) study.

Poverty is strongly associated with all-cause and chronic obstructive pulmonary disease (COPD) mortality. Less is known about the contribution of poverty to spirometrically defined chronic airflow obstruction (CAO)-a key characteristic of COPD. Using cross-sectional data from an asset-based questionnaire to define poverty in 21 sites of the Burden of Obstructive Lung Disease study, we estimated the risk of CAO attributable to poverty. Up to 6% of the population over 40 years had CAO attributable to poverty. Understanding the relationship between poverty and CAO might suggest ways to improve lung health, especially in low-income and middle-income countries