773 research outputs found
Evaluation of bearing technology in direct drive electrical generators
This paper presents an evaluation of mechanical contact less magnetic bearing against the conventional industry standard rolling element bearing in direct drive electrical generators. The evaluations are performed based on the energy consideration and their potential contribution in structural mass reduction of rotor. A cylindrical rolling element bearing is chosen to represent the conventional type and an approximate modelling of magnetic bearing is carried out to evaluate them. A finite element analysis in the rotor structure is performed to estimate its mass and to analyse any potential saving in mass by the use of magnetic bearing
Thermal modelling of a small wind turbine gearbox for condition monitoring
This paper details the development of a mathematical thermal model of a small wind turbine gearbox for use in condition monitoring. The model was optimised and partially validated using experimental data from a wind turbine drivetrain test rig. The model was then used to mimic bearing faults, by simulating additional heat losses at respective faulty components. The extent to which the thermal behaviour changed as a result of a fault was studied, with a view to use such an approach to detect and locate faults
Parametric lightweight design of a direct-drive wind turbine electrical generator supporting structure for minimizing dynamic response
Heavy, large and robust supporting structures are needed to keep the airgap clearance of direct-drive multi-MW wind turbine electrical generators open and stable. As rotating pieces of machinery, generators vibrate when their natural frequencies are excited introducing potentially large amplitude oscillations due to the forces acting on them that could cause structural fatigue, noise and, in the worst-case scenario, their sudden collapse. A novel procedure for cost-effective and dynamically efficient structural design of a generator has been developed through a series of different finite element studies for a proposed 3MW machine with a conical rotor structure working under extreme conditions. Following a parametric approach coupled with the use of a topology optimisation tool it was demonstrated that the structural mass and dynamic response of the machine can be minimised, while complying with the deflection requirements
Large and Almost Maximal Neutrino Mixing within the Type II See-Saw Mechanism
Within the type II see-saw mechanism the light neutrino mass matrix is given
by a sum of a direct (or triplet) mass term and the conventional (type I)
see-saw term. Both versions of the see-saw mechanism explain naturally small
neutrino masses, but the type II scenario offers interesting additional
possibilities to explain large or almost maximal or vanishing mixings which are
discussed in this paper. We first introduce ``type II enhancement'' of neutrino
mixing, where moderate cancellations between the two terms can lead to large
neutrino mixing even if all individual mass matrices and terms generate small
mixing. However, nearly maximal or vanishing mixings are not naturally
explained in this way, unless there is a certain initial structure (symmetry)
which enforces certain elements of the matrices to be identical or related in a
special way. We therefore assume that the leading structure of the neutrino
mass matrix is the triplet term and corresponds to zero U_{e3} and maximal
theta_{23}. Small but necessary corrections are generated by the conventional
see-saw term. Then we assume that one of the two terms corresponds to an
extreme mixing scenario, such as bimaximal or tri-bimaximal mixing. Deviations
from this scheme are introduced by the second term. One can mimic Quark-Lepton
Complementarity in this way. Finally, we note that the neutrino mass matrix for
tri-bimaximal mixing can be -- depending on the mass hierarchy -- written as a
sum of two terms with simple structure. Their origin could be the two terms of
type II see-saw.Comment: 25 pages. Comments and references added, to appear in JHE
Symmetry Nonrestoration in a Gross-Neveu Model with Random Chemical Potential
We study the symmetry behavior of the Gross-Neveu model in three and two
dimensions with random chemical potential. This is equivalent to a four-fermion
model with charge conjugation symmetry as well as Z_2 chiral symmetry. At high
temperature the Z_2 chiral symmetry is always restored. In three dimensions the
initially broken charge conjugation symmetry is not restored at high
temperature, irrespective of the value of the disorder strength. In two
dimensions and at zero temperature the charge conjugation symmetry undergoes a
quantum phase transition from a symmetric state (for weak disorder) to a broken
state (for strong disorder) as the disorder strength is varied. For any given
value of disorder strength, the high-temperature behavior of the charge
conjugation symmetry is the same as its zero-temperature behavior. Therefore,
in two dimensions and for strong disorder strength the charge conjugation
symmetry is not restored at high temperature.Comment: 16 pages, 3 figure
Implementation of a pharmacogenomics consult service to support the INGENIOUS trial
Hospital systems increasingly utilize pharmacogenomic testing to inform clinical prescribing. Successful implementation efforts have been modeled at many academic centers. In contrast, this report provides insights into the formation of a pharmacogenomics consultation service at a safety-net hospital, which predominantly serves low-income, uninsured, and vulnerable populations. The report describes the INdiana GENomics Implementation: an Opportunity for the UnderServed (INGENIOUS) trial and addresses concerns of adjudication, credentialing, and funding
Probing R-parity violating models of neutrino mass at the Tevatron via top Squark decays
We have estimated the limiting branching ratio of the R-parity violating
(RPV) decay of the lighter top squark, \tilde t_1 \ar l^+ d ( or
and d is a down type quark of any flavor), as a function of top squark
mass(\MST) for an observable signal in the di-lepton plus di-jet channel at
the Tevatron RUN-II experiment with 2 fb luminosity. Our simulations
indicate that the lepton number violating nature of the underlying decay
dynamics can be confirmed via the reconstruction of \MST. The above decay is
interesting in the context of RPV models of neutrino mass where the RPV
couplings () driving the above decay are constrained to be
small (\lsim 10^{-3} - 10^{-4} ). If is the next lightest super
particle - a theoretically well motivated scenario - then the RPV decay can
naturally compete with the R-parity conserving (RPC) modes which also have
suppressed widths. The model independent limiting BR can delineate the
parameter space in specific supersymmetric models, where the dominating RPV
decay is observable and predict the minimum magnitude of the RPV coupling that
will be sensitive to Run-II data. We have found it to be in the same ballpark
value required by models of neutrino mass, for a wide range of \MST. A
comprehensive future strategy for linking top squark decays with models of
neutrino mass is sketched.Comment: 28 pages, 14 Figure
Quantum Oscillation Studies of the Fermi Surface of LaFePO
We review recent experimental measurements of the Fermi surface of the
iron-pnictide superconductor LaFePO using quantum oscillation techniques. These
studies show that the Fermi surface topology is close to that predicted by
first principles density functional theory calculations, consisting of
quasi-two-dimensional electron-like and hole-like sheets. The total volume of
the two hole sheets is almost equal to that of the two electron sheets, and the
hole and electron Fermi surface sheets are close to a nesting condition. No
evidence for the predicted three dimensional pocket arising from the Fe
band is found. Measurements of the effective mass suggest a
renormalisation of around two, close to the value for the overall band
renormalisation found in recent angle resolved photoemission measurements.Comment: Submitted to Physica C special issue on iron-pnictide superconductor
First Measurement of Z/gamma* Production in Compton Scattering of Quasi-real Photons
We report the first observation of Z/gamma* production in Compton scattering
of quasi-real photons. This is a subprocess of the reaction e+e- to
e+e-Z/gamma*, where one of the final state electrons is undetected.
Approximately 55 pb-1 of data collected in the year 1997 at an e+e-
centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been
analysed. The Z/gamma* from Compton scattering has been detected in the
hadronic decay channel. Within well defined kinematic bounds, we measure the
product of cross-section and Z/gamma* branching ratio to hadrons to be
(0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV,
dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60
GeV, dominated by (e)egamma* production, this product is found to be
(4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo
event generators, grc4f and PYTHIA.Comment: 18 pages, LaTeX, 5 eps figures included, submitted to Physics Letters
- …