193 research outputs found

    Effect of stocking density on growth of tiger shrimp (Penaeus monodon Fab.) fed on commercial formulated diets

    Get PDF
    Three different stocking rates in a semi-intensive pilot shrimp project was adopted in duplicates of three treatments designated as T1, T2 and T3 having initial per meter square stocking density of shrimp of 40, 44 and 51 respectively of 0.025g size post larva. The study was conducted for 84 days. Commercial pelleted diets designated as starter - 1, 2, 3 and grower were fed at a satiation level during the study period with a feeding frequency of 4 to 5 times per day. Feed rationing was based on the survivability, body weight and tray checking. 5-25% of the pond water was exchanged daily. Sampling was done for growth after every 2nd week. Monthly sampling was done for mortality in the ponds. Mean weight gain of the shrimp in treatments T1, T2 and T3 were 16.96 ± 1.14, 16.04 ± 1.38 and 14.08 ± 1.17g respectively and T1 with a low stocking density showed a significantly best growth among the treatments. Total mortality in treatments T1, T2 and T3 were as 30.00, 39.77 and 31.37% respectively. Significantly higher feed conversion ratio (FCR) of 1.87 was obtained with shrimp in treatment T3 followed by shrimp in T1 and T2 with FCR values of 1.70 and 1.41 respectively. A positive correlation of growth and salinity was observed during the study. Total production per unit area was the highest in the treatment T3 (4928 kg/ha) and followed by T1 (4747 kg/ha) and T2 (4251 kg/ha). The result show significantly negative correlation between individual growth and density

    Studies on the growth and production of six major and exotic carps in Nasti baor, Jhenaidah, Bangladesh

    Get PDF
    An investigation on growth, production and fishery of three Indian major carps: rohu, Labeo rohita, catla, Catla catla and mrigal, Cirrhinus mrigala and three exotic carps: silver carp, Hypophthalmichthys molitrix, grass carp, Ctenopharyngodon idella, and common carp, Cyprinus carpio was carried out in Nasti baor during February to April months. In catch per unit effort (CPUE) study the highest catch/day/person (3.13 kg) and catch/day/gear (40.65 kg) was recorded in the month of March for kochal fishing. In komar fishing catch/day/person (15.08 kg) and catch/day/gear (1206 kg) was also found higher in March. Komar fishing was done only in March and April and its CPUE was greater in both the months than that of kochal. The average recovery rate (combination of all six species) was 37.80 considering the stocking from July month of the previous year. The recovery rate of common carp (54.1) was the highest and lowest (13.90) in case of silver carp. When the recovery was calculated on the basis of one year data and stocking, it was 55.6%. Analysis of production model revealed that the present production (54,806 kg/year) is less than both theoretical production (model I- 85,285 kg/year and model II -75,952 kg/year) estimated. Therefore, it may be concluded that the fish production from Nasti baor could still be increased from the present level of production

    Effects of oxytetracycline residues in Thai Koi (Anabas testudineus Bloch) collected from Sylhet, Bangladesh

    Get PDF
    The present study was conducted to determine the levels of oxytetracycline residues in Thai Koi (Anabas testudineus Bloch) collected from some local fish markets of Sylhet Sadar Upazilla, Bangladesh during March to August, 2016. For the purpose of the study, 24 fresh Thai Koi fish samples were randomly collected from four (4) local markets of Sylhet Sadar Upazilla. Concentration of oxytetracycline residues in collected fish samples were determined by High Performance Liquid Chromatography (HPLC) at the Food Toxicology Laboratory of Institute of Food Science and Technology, Bangladesh Council of Scientific and Industrial Research, Dhaka. The results showed that 9 (37.50%) samples with detectable amount of oxytetracycline residues (mean = 42.30±3.00 ppb) were found in Thai Koi. Oxytetracycline residues level below detection limit was also reported in 15 (62.50%) samples of Thai Koi during this study. The detected residues of oxytetracycline in this fish sample did not exceed the maximum residue limit (MRL) 100 ppb recommended by the European Commission. Though residue level of oxytetracycline is lower than the MRL but long term exposure could be hazardous for human health. For that reason, control of antibiotic usage in aquaculture, regular residue monitoring, legislations and regulations for the use of antimicrobials in aquaculture and food safety education are utmost things in this regard

    Experimental investigation of performance, emission and combustion characteristics of an indirect injection multi-cylinder CI engine fuelled by blends of de-inking sludge pyrolysis oil with biodiesel

    Get PDF
    De-inking sludge can be converted into useful forms of energy to provide economic and environmental benefits. In this study, pyrolysis oil produced from de-inking sludge through an intermediate pyrolysis technique was blended with biodiesel derived from waste cooking oil, and tested in a multi-cylinder indirect injection type CI engine. The physical and chemical properties of pyrolysis oil and its blends (20 and 30 vol.%) were measured and compared with those of fossil diesel and pure biodiesel (B100). Full engine power was achieved with both blends, and very little difference in engine performance and emission results were observed between 20% and 30% blends. At full engine load, the brake specific fuel consumption on a volume basis was around 6% higher for the blends when compared to fossil diesel. The brake thermal efficiencies were about 3-6% lower than biodiesel and were similar to fossil diesel. Exhaust gas emissions of the blends contained 4% higher CO2 and 6-12% lower NOx, as compared to fossil diesel. At full load, CO emissions of the blends were decreased by 5-10 times. The cylinder gas pressure diagram showed stable engine operation with the 20% blend, but indicated minor knocking with 30% blend. Peak cylinder pressure of the 30% blend was about 5-6% higher compared to fossil diesel. At full load, the peak burn rate of combustion from the 30% blend was about 26% and 12% higher than fossil diesel and biodiesel respectively. In comparison to fossil diesel the combustion duration was decreased for both blends; for 30% blend at full load, the duration was almost 12% lower. The study concludes that up to 20% blend of de-inking sludge pyrolysis oil with biodiesel can be used in an indirect injection CI engine without adding any ignition additives or surfactants

    Quantifying the impact of Ramadan on global raw sugar prices

    Get PDF
    Each year during the month of Ramadan (Muslim fasting month) consumption of sugar increased dramatically across the globe as Muslims traditionally break their fast with some sweet drinks or products. Since Muslims use lunar calendar, the months are not fully aligned with the Gregorian calendar or with the seasonal calendar for agricultural crops. In this paper, we quantify the impact of Ramadan on both the price and its growth of global raw sugar price. To set the stage for the empirical work that follows, we employ a dummy and a fractional variable to capture Ramadan in order to overcome the asynchronicity of time between Ramadan fasting (which is based on Islamic lunar calendar) and movement in prices (which follows the Gregorian solar calendar). In order to capture seasonality of production in sugar production, data on sugar price spans over thirty-four years so that the Islamic calendar makes a complete cycle of the Gregorian calendar. Using ARIMA and UCM models, we find strong evidence that monthly raw sugar prices in the global market increases by roughly 6.06% (or $17.78 per metric ton) every year ahead of Ramadan

    Quantifying the impact of Ramadan on global raw sugar prices

    Get PDF
    Each year during the month of Ramadan (Muslim fasting month) consumption of sugar increased dramatically across the globe as Muslims traditionally break their fast with some sweet drinks or products. Since Muslims use lunar calendar, the months are not fully aligned with the Gregorian calendar or with the seasonal calendar for agricultural crops. In this paper, we quantify the impact of Ramadan on both the price and its growth of global raw sugar price. To set the stage for the empirical work that follows, we employ a dummy and a fractional variable to capture Ramadan in order to overcome the asynchronicity of time between Ramadan fasting (which is based on Islamic lunar calendar) and movement in prices (which follows the Gregorian solar calendar). In order to capture seasonality of production in sugar production, data on sugar price spans over thirty-four years so that the Islamic calendar makes a complete cycle of the Gregorian calendar. Using ARIMA and UCM models, we find strong evidence that monthly raw sugar prices in the global market increases by roughly 6.06% (or $17.78 per metric ton) every year ahead of Ramadan

    Combustion of fuel blends containing digestate pyrolysis oil in a multi-cylinder compression ignition engine

    Get PDF
    Digestate from the anaerobic digestion conversion process is widely used as a farm land fertiliser. This study proposes an alternative use as a source of energy. Dried digestate was pyrolysed and the resulting oil was blended with waste cooking oil and butanol (10, 20 and 30 vol.%). The physical and chemical properties of the pyrolysis oil blends were measured and compared with pure fossil diesel and waste cooking oil. The blends were tested in a multi-cylinder indirect injection compression ignition engine.Engine combustion, exhaust gas emissions and performance parameters were measured and compared with pure fossil diesel operation. The ASTM copper corrosion values for 20% and 30% pyrolysis blends were 2c, compared to 1b for fossil diesel. The kinematic viscosities of the blends at 40 C were 5–7 times higher than that of fossil diesel. Digested pyrolysis oil blends produced lower in-cylinder peak pressures than fossil diesel and waste cooking oil operation. The maximum heat release rates of the blends were approximately 8% higher than with fossil diesel. The ignition delay periods of the blends were higher; pyrolysis oil blends started to combust late and once combustion started burnt quicker than fossil diesel. The total burning duration of the 20% and 30% blends were decreased by 12% and 3% compared to fossil diesel. At full engine load, the brake thermal efficiencies of the blends were decreased by about 3–7% when compared to fossil diesel. The pyrolysis blends gave lower smoke levels; at full engine load, smoke level of the 20% blend was 44% lower than fossil diesel. In comparison to fossil diesel and at full load, the brake specific fuel consumption (wt.) of the 30% and 20% blends were approximately 32% and 15% higher. At full engine load, the CO emission of the 20% and 30% blends were decreased by 39% and 66% with respect to the fossil diesel. Blends CO2 emissions were similar to that of fossil diesel; at full engine load, 30% blend produced approximately 5% higher CO2 emission than fossil diesel. The study concludes that on the basis of short term engine experiment up to 30% blend of pyrolysis oil from digestate of arable crops can be used in a compression ignition engine

    Genetic variability of kernel provitamin-A in sub-tropically adapted maize hybrids possessing rare allele of β-carotene hydroxylase

    Get PDF
    Vitamin-A deficiency is a major health concern. Traditional yellow maize possesses low provitamin-A (proA). Mutant crtRB1 gene significantly enhances proA. 24 experimental hybrids possessing crtRB1 allele were evaluated for β-carotene (BC), β-cryptoxanthin (BCX), lutein (LUT), zeaxanthin (ZEA), total carotenoids (TC) and grain yield at multi-locations. BC (0.64–17.24 µg/g), BCX (0.45–6.84 µg/g), proA (0.86–20.46 µg/g), LUT (9.60–31.03 µg/g), ZEA (1.24–12.73 µg/g) and TC (20.60–64.02 µg/g) showed wide variation. No significant genotype × location interaction was observed for carotenoids. The mean BC (8.61 µg/g), BCX (4.04 µg/g) and proA (10.63 µg/g) in crtRB1-based hybrids was significantly higher than normal hybrids lacking crtRB1-favourable allele (BC: 1.73 µg/g, BCX: 1.29 µg/g and proA: 2.37 µg/g). Selected crtRB1-based hybrids possessed 33% BC and 40% BCX compared to 6% BC and 5% BCX in normal hybrids. BC showed positive correlation with BCX (r = 0.90), proA (r = 0.99) and TC (r = 0.64) among crtRB1-based hybrids. Carotenoids didn't show association with grain yield. Average yield potential of proA rich hybrids (6794 kg/ha) was at par with normal hybrids (6961 kg/ha). PROAH-13, PROAH-21, PROAH-17, PROAH-11, PROAH-23, PROAH-24 and PROAH-3 were the most promising with >12 µg/g proA and >6000 kg/ha grain yield. The newly identified crtRB1-based hybrids assume significance in alleviating malnutrition

    Turbulent heat transfer enhancement in tubular heat exchangers with different twisted tape inserts

    Get PDF
    Experimental and numerical analyses are carried out to investigate the influence of twisted tape inserts on the heat transfer and the flow behavior in double tube heat exchangers. First, all the performance factors, namely the Nusselt number, friction factor, and thermal performance factor, were studied for a basic heat exchanger (BHE). Afterwards, twisted tapes with three different twist ratios (7.5, 6, and 4.5) were inserted inside the inner tube of the BHE, which resulted in three different modified heat exchangers (MHEs). For the numerical study, a 3D numerical model is developed with the k-ε RNG turbulent model to visualize the flow and the heat transfer behavior inside the heat exchangers. In both studies, turbulent flow field is maintained, ranging Reynolds number from 15000 to 50000. From the experimental result, an enhanced heat transfer, characterized by the performance factors, is found for all the MHEs compared to the BHE. The most enhanced thermal performance factor is achieved for the MHE with the lowest twist ratio. Finally, a good agreement between obtained numerical and experimental results reveals that the present numerical model can reliably predict the flow and heat transfer behavior in double tube heat exchangers
    • …
    corecore