2,537 research outputs found
The Greek Current Account Deficit:Is it Sustainable after all?
The large Greek current account deficit figures reported during the past few years have become the source of increasing concern regarding its sustainability. Bearing in mind the variety of techniques employed and the views expressed as regards the analysis and the assessment of the size of the current account deficit, this paper resorts to using neural network architectures to demonstrate that, despite its size, the current account deficit of Greece can be considered sustainable. This conclusion, however, is not meant to neglect the structural weaknesses that lead to such a deficit. In fact, even in the absence of any financing requirements these high deficit figures point to serious competitiveness losses with everything that these may entail for the future performance of the Greek economy.Neural Networks; Current Account Deficit Sustainability
Atomic force microscopy for university students: applications in biomaterials
Atomic Force Microscopy (AFM) is a powerful tool regarding the investigation of the structural and the mechanical properties of a wide range of materials including biomaterials. It provides the ability to acquire high resolution images of biomaterials in nanoscale. In addition, it provides information about the response of specific areas under controlled applied force which leads to the mechanical characterization of the sample in nanoscale. The broad band of information provided by AFM have been established it as a complete scientific instrument with tremendous impact in modern research activity. In this paper, a general overview of the basic operation and functions of AFM is presented for applications in biomaterials. The basic operation is explained in detail with focus on the real interactions which are taking place in nanoscale during imaging. Furthermore, its ability to provide the mechanical characterization (force curves) of specific areas in nanoscale is presented. The basic models of applied mechanics which are used for the processing of the data obtained by force curves are presented. In conclusion, a general overview of the Atomic Force Microscopy for biophysics applications is provided which will contribute to the complete presentation of the instrument for university students and young researchers
Mucosal delivery of tuberculosis vaccines: a review of current approaches and challenges.
Introduction: Tuberculosis (TB) remains a major health threat and it is now clear that the current vaccine, BCG, is unable to arrest the global TB epidemic. A new vaccine is needed to either replace or boost BCG so that a better level of protection could be achieved. The route of entry of Mycobacterium tuberculosis, the causative organism, is via inhalation making TB primarily a respiratory disease. There is therefore good reason to hypothesize that a mucosally delivered vaccine against TB could be more effective than one delivered via the systemic route.Areas covered: This review summarizes the progress that has been made in the area of TB mucosal vaccines in the last few years. It highlights some of the strengths and shortcomings of the published evidence and aims to discuss immunological and practical considerations in the development of mucosal vaccines.Expert opinion: There is a growing body of evidence that the mucosal approach to vaccination against TB is feasible and should be pursued. However, further key studies are necessary to both improve our understanding of the protective immune mechanisms operating in the mucosa and the technical aspects of aerosolized delivery, before such a vaccine could become a feasible, deployable strategy
Two-phase homogeneous diffusion model for the fixed bed sorption of heavy metals on natural zeolites
In this work, the fixed bed removal kinetics of Pb2+, Zn2+, Mn2+, Cr3+, Fe3+ and Cu2+ from aqueous solutions on natural zeolites was studied. For this aim, a non-dimensional two-phase homogeneous solid diffusion model including axial dispersion and equipped with a universal double-selectivity equilibrium model is developed and applied. In total 9 isotherms, representing 128 experimental points and 25 breakthrough curves, representing 764 experimental points are used in modeling. The application of the model is satisfactory resulted in an average deviation from the experimental data of 11.19 ± 5.53%. The solid phase diffusion coefficients are between 10â7 and 10â9 cm2/s depending on the metal, flow rate and particle size in the decreasing order of Cu > Fe, Cr > Zn, Pb > Mn. The study is supplemented by an extended literature review on fixed bed models and experimentally derived solid phase diffusion coefficients in zeolites
Sustainable treatment method of a high concentrated NH3 wastewater by using natural zeolite in closed-loop fixed bed systems
The aim of this study is to investigate ammonium removal from a wastewater resulted after homogenization and anaerobic digestion of a mixture of wastes and wastewater from animal processing units and sewage sludge, by using natural zeolite clinoptilolite. Batches as well as closed loop fixed bed system (CLFB) are studied, offering an alternative to conventional fixed bed systems. The experimental results showed that the optimum pH is in the vicinity of 6.48, where the achieved removal in the batch system reached 46%. The CLFB system, under the same experimental conditions and relative flow rate of 2.56 BV hâ1, reached a removal of 55%, which is almost 22% higher. In the CLFB the removal of ammonia could be further increased by diluting the initial solution by 1/8, reaching the level of 96%. The achieved zeolite loading, for all studied systems, is between 2.62 and 13 mg gâ1. This kind of operation is very useful for relatively high concentration and small volumes of wastewater and in systems that there is no need for continuous flow operation
Preparing DARIAH
In this paper, a preparatory project for an integrated European research infrastructure in the humanities is presented. This project, Preparing for the construction of the Digital Research Infrastructure for the Arts and Humanities - or Preparing DARIAH for short, is part of the ESFRI e-infrastructures programme and supports the emergence of a new collaborative framework in which researchers are able to maximise the impact of their work on the international stage and aims at providing the foundations for the timely construction of the infrastructure requisite for the arts, humanities and cultural heritage communities in the digital age. DARIAH uses an interdisciplinary approach and involves tackling a number of interrelated issues such as strategic, organisational, financial, technical and conceptual in order to facilitate long-term access to and use of all European humanities and cultural heritage information for the purposes of enhancing and expanding research, thereby increasing our knowledge and understanding of our histories, heritage, languages and cultures. The DARIAH network will act as a place where the incubation of new ideas and ways of working can be facilitated and developed, and then transitioned into established organisations thus ensuring long-term sustainability and stability and the integration of these methods and techniques into everyday research practice. DARIAH will support research practitioners at all stages in the research process, and at differing levels of sophistication, from beginners through to those employing advanced techniques and methodologies
Learnings from LCA-based methods: should chemicals in food packaging be a priority focus to protect human health?
The Serums Tool-Chain:Ensuring Security and Privacy of Medical Data in Smart Patient-Centric Healthcare Systems
Digital technology is permeating all aspects of human society and life. This leads to humans becoming highly dependent on digital devices, including upon digital: assistance, intelligence, and decisions. A major concern of this digital dependence is the lack of human oversight or intervention in many of the ways humans use this technology. This dependence and reliance on digital technology raises concerns in how humans trust such systems, and how to ensure digital technology behaves appropriately. This works considers recent developments and projects that combine digital technology and artificial intelligence with human society. The focus is on critical scenarios where failure of digital technology can lead to significant harm or even death. We explore how to build trust for users of digital technology in such scenarios and considering many different challenges for digital technology. The approaches applied and proposed here address user trust along many dimensions and aim to build collaborative and empowering use of digital technologies in critical aspects of human society
- âŠ