Stress intensity factor for multiple inclined or curved cracks problem in circular positions in plane elasticity

The problems of multiple inclined or curved cracks in circular positions is treated by using the hypersingular integral equation method. The cracks center are placed at the edge of a virtual circle with radius R. The first crack is fixed on the x-axis while the second crack is located on the boundary of a circle with the varying angle, θ. A system of hypersingular integral equations is formulated and solved numerically for the stress intensity factor (SIF). Numerical examples demonstrate the effect of interaction between two cracks in circular positions are given. It is found that, the severity at the second crack tips are significant when the ratio length of the second to the first crack is small and it is placed at a small angle of θ

Oil palm leaf fibre and its suitability for paper-based products

Due to the shortage of wood as origin materials for paper-based production, agro-residue materials have been explored in the quest of finding the best alternative fibre. Oil palm leaf (OPL) is one of agro-residue that has potential due to its comparable characteristics with wood fibre. Studies on chemical compositions, fibre morphology, and mechanical property of OPL have been carried out aiming to evaluate its potential as a substitute raw material for pulp and paper-based production. The chemical compositions were analysed according to the TAPPI standard, Kurscher-Hoffner and chlorite methods accordingly. The mechanical property (tensile, tearing and bursting strengths) were determined as described in TAPPI test methods. Fibre dimensions were determined using Franklin method and analysed under the optical microscope. The content of cellulose in the OPL is determined to be 43.8%. Although, this result is lower than wood fibre (53%), OPL has higher hemicellulose content (36.4%) than the wood fibre (27.5%). In addition, the lignin content (19.7%) of OPL is in the low range of those in wood resources (18 - 25%). These parameters are important components to produce good quality pulp and will provide high mechanical strength of the paper-based products. The measured fibre length of oil palm leaf (1.13 mm) is shorter than the wood fibre (1.90 mm). Meanwhile, the mechanical property of OPL showed lower indexes than wood resources, however, tear (1.80 mN.m2/g) and burst (0.95 kPa.m2/g) indexes of OPL are higher than other published and successful wood resources (Eucalyptus). Based on the analyses, the oil palm leaf is indeed a suitable alternative of raw material for pulp and paper-based industries

Purification and characterization of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. G1

A cyclodextrin glucanotransferase (CGTase) was successively purified by ammonium sulphate precipitation, and affinity chromatography on a-CD (epoxy)-Sepharose 6B column. The specific activity of the CGTase was increased approximately 2200-fold, from 8.43 U/mg protein to 18,866 U/mg protein. SDS-PAGE showed that the purified CGTase was homogeneous and the molecular weight of the purified CGTase was about 75 kDa. The molecular weight of the enzyme that was estimated by gel filtration under native condition was 79 kDa. This has indicated that Bacillus sp. G1 CGTase is a monomeric protein. The isoelectric point (pI) of the enzyme was about 8.8. Characterization of the enzyme exhibited optimum pH and temperature of 6.0 and 60 8C, respectively. The enzyme was stable from pH 7.0 to 9.0 and retained its high activity up to 60 8C. However, in the presence of 20 mM Ca2+, the purified CGTase is able to prolong its thermal stability up to 70 8C. CGTase was strongly inhibited by ZnSO4, CuSO4, CoCl2, FeSO4, FeCl3 and EDTA. Km and Vmax for the purified enzyme were 0.15 mg/ml and 60.39 mg bcyclodextrin/( ml min), respectively, with soluble starch as substrate. In cyclodextrin production, tapioca starch was found to be the best substrate used to produce CDs. The enzyme produced g- and b-CD in the ratio of 0.11:0.89 after 24 h incubation at 60 8C, without the presence of any selective agents

Battery cell balancing optimisation for battery management system

Battery cell balancing in every electrical component such as home electronic equipment and electric vehicle is very important to extend battery run time which is simplified known as battery life. The underlying solution to equalize the balance of cell voltage and SOC between the cells when they are in complete charge. In order to control and extend the battery life, the battery cell balancing is design and manipulated in such way as well as shorten the charging process. Active and passive cell balancing strategies as a unique hallmark enables the balancing of the battery with the excellent performances configuration so that the charging process will be faster. The experimental and simulation covers an analysis of how fast the battery can balance for certain time. The simulation based analysis is conducted to certify the use of optimisation in active or passive cell balancing to extend battery life for long periods of time

A review on activated carbon: process, application and prospects

Activated carbon (AC) is used in different states of applications after its discovery as a strong and reliable adsorbent. An overview on AC is presented together with revisiting the sources of AC generation; methods used to generate AC comprising of pyrolysis activation; physical activation; chemical activation and steam pyrolysis. The important factors affecting the AC production, the possible applications of AC and their future prospects are also discussed. AC is applied in water, wastewater and leachate treatments in many countries, especially to polish the color, remove the odor and some heavy metals. It is cheap and available, and can be produced from agricultural waste materials, e.g. rice husk, palm oil shell and coconut shell. The AC’s fine and porous structure and an extremely large particle surface area (>1000 m2/g) results in making it possessed powerful adsorptive properties. Therefore, the adsorption process using AC is found to be a potentially viable method of removing pollutants from aqueous solutions

The Influence of Self-Regard on Response of Belief in God and Awareness of Prophetic Teaching

Personality and religion relationship has long been studied by Western and Muslim researchers in order to find any association between religious factors anda person\u27s behavior and thought. The present study sought to expand research by investigating the differences in the latent factors, namely Tawhid (Belief in God), Nubuwwa(Awareness of Prophetic Teaching), Self-striving, and Self-regard, in a newly developed scale of Integrative Islamic Personality Inventory (IIPI). The sample of this study was a group of undergraduate students (n= 1235) in ten universities in Turkey. Data were analyzed using Confirmatory Factor Analysis and Structural Equation Modeling. The main goal of this study was to investigate the statistical properties of this scale and examine if it could be applied across university students. It is apparent that Belief in God and Awareness of Prophetic Teaching, Self-regard and Self-striving represent psychological and social implications for individuals. Thus, the model of this research makes an important contribution to understanding and predicting how Muslims think, act, and experience Islam

Distance Properties of Short LDPC Codes and their Impact on the BP, ML and Near-ML Decoding Performance

Parameters of LDPC codes, such as minimum distance, stopping distance, stopping redundancy, girth of the Tanner graph, and their influence on the frame error rate performance of the BP, ML and near-ML decoding over a BEC and an AWGN channel are studied. Both random and structured LDPC codes are considered. In particular, the BP decoding is applied to the code parity-check matrices with an increasing number of redundant rows, and the convergence of the performance to that of the ML decoding is analyzed. A comparison of the simulated BP, ML, and near-ML performance with the improved theoretical bounds on the error probability based on the exact weight spectrum coefficients and the exact stopping size spectrum coefficients is presented. It is observed that decoding performance very close to the ML decoding performance can be achieved with a relatively small number of redundant rows for some codes, for both the BEC and the AWGN channels