Design of fibre reinforced PV concepts for building integrated applications

Fibre reinforced polymers present an interesting encapsulation medium for PV-modules. Glass fibres can provide increased strength and stiffness to thin polymer layers overcoming the brittleness and limited deformability of glass-panes. Glass fibre reinforced polymers allows for transparency over a broad range of the solar spectrum while the material properties and integral production processes create possibilities for novel product concepts with embedded PV technology. To explore such possibilities, innovative design methods were used to design novel PV product concepts for applications in the build environment.\ud In our paper three conceptual designs are presented; (1) a thin film module with an adjoining interconnection system functioning as structural element for geodetic roofing structures, (2) a PV lamella with single-axis tracking utilizing a linear concentration effect caused by the geometry of the product and the materials applied, and (3) a prepreg PV-material which allows for easy shaping during the production of PV modules with complex geometries. Each concept employs a specific PV technology and demonstrates a possible application aimed at a specific market. In this way we show the potential of integration of PV technology in fibre reinforced composites. The paper will be illustrated by concept renderings

The catalytic oxidation of organic contaminants in a packed bed reactor

The catalytic oxidation of several hydrocarbons was studied over noble metal and metal oxide catalysts. A fast empirical method was developed to determine the minimum operating temperature required to guarantee complete conversion of the hydrocarbon.\ud \ud The influence of the operating parameters such as the inlet concentration and residence time, as well as the chemical character of the component to be oxidized, have been investigated. The results can be described satisfactorily by a simple isothermal, plug flow reactor model and first-order reaction kinetics. In the case of simultaneous oxidation of different components a significant mixture effect was not observed. The presence of water in the feed did significantly inhibit the oxidation of alkanes.\ud \ud Of the applied catalysts, Pt was the most effective for the combustion of the alkenes, whereas Pd showed a higher activity for the oxidation of alkanes

Predicative Ability of QCD Sum Rules for Decuplet Baryons

QCD sum rules for decuplet baryon two-point functions are investigated using a comprehensive Monte-Carlo based procedure. In this procedure, all uncertainties in the QCD input parameters are incorporated simultaneously, resulting in realistic estimates of the uncertainties in the extracted phenomenological parameters. Correlations between the QCD input parameters and the phenomenological parameters are studied by way of scatter plots. The predicted couplings are useful in evaluating matrix elements of decuplet baryons in the QCD sum rule approach. They are also used to check a cubic scaling law between baryon couplings and masses, as recently found by Dey and coworkers. The results show a significant reduction in the scaling constant and some possible deviations from the cubic law.Comment: 13 pages, RevTeX, 5 PS figures embedded with psfig.st

Transport Activity of Rice Sucrose Transporters OsSUT1 and OsSUT5

Expression in Xenopus oocytes and electrophysiology was used to test for transport activity of the five sucrose transporter (SUT) homologs from rice. Expression of OsSUT1 and OsSUT5 resulted in sucrose-dependent currents that were analyzed by two-electrode voltage clamping. We examined the transport kinetics, substrate specificity and pH dependence of sucrose transport and K0.5 for sucrose. OsSUT1 showed similar features to those of other type II SUTs from monocots examined previously, with a K0.5 value of 7.50 mM at pH 5.6. In contrast, OsSUT5 had a higher substrate affinity (K0.5 = 2.32 mM at pH 5.6), less substrate specificity and less pH dependence compared with all type II SUTs tested to date. Regulation of the rice SUTs, as well as ZmSUT1 from maize and HvSUT1 from barley, by reduced (GSH) and oxidized (GSSG) forms of glutathione was tested. GSSG and GSH were found to have no significant effect on the activity of sucrose transporters when expressed in Xenopus oocytes. In conclusion, differences in transport activity between OsSUT1 and OsSUT5 indicate that type II SUTs have a range of transport activities that are tuned to their function in the plant

Calculation of coupling constant g_phi-pi-gamma in QCD sum rules

The coupling constant of g_phi-pi-gamma decay is calculated in the method of QCD sum rules. A comparison of our prediction on the coupling constant with the result obtained from analysis of the experimental data is performed.Comment: 6 pages, 3 figure

Positive and negative-parity flavor-octet baryons in coupled QCD sum rules

We apply the method of the QCD sum rule, in which positive- and negative-parity baryons couple with each other, to the flavor-octet hyperons and investigate the parity splittings. We also reexamine the nucleon in the method, which was studied in our previous paper, by carefully choosing the Borel weight. Both in the nucleon and hyperon channels the obtained sum rules turn out to have a very good Borel stability and also have a Borel window, an energy region in which the OPE converges and the pole contribution dominates over the continuum contribution. The predicted masses of the positive- and negative-parity baryons reproduce the experimental ones fairly well in the $\Lambda$ and $\Sigma$ channels, if we assign the $\Lambda(1670)$ and the $\Sigma(1620)$ to the parity partners of the $\Lambda$ and the $\Sigma$, respectively. This implies that the $\Lambda(1405)$ is not the party partner of the $\Lambda$ and may be a flavor-singlet or exotic state. In the $\Xi$ channel, the sum rule predicts the mass of the negative-parity state to be about 1.8 GeV, which leads to two possibilities; one is that the observed state with the closest mass, $\Xi(1690)$, is the parity partner and the other is that the parity partner is not yet found but exists around 1.8 GeV.Comment: 15 pages, 4 figure

Comparison of anti-mydriatic effects and patient comfort fo the recommended and reduced doses of Rev-Eyes (0.5% dapiprazole HCL)

The effect on reversal of dilation of two different doses of REV-EYES (dapiprazole HCI), the recently introduced anti-mydriatic, was investigated in this study. The manufacturer\u27s recommended dose, and exactly half that dose were compared in a double masked crossover study design. Subjects were dilated with 2.5% phenylephrine and 1% tropicamide. The pre and post dilation variables examined were near and far visual acuity, accommodative amplitude, pupil diameter, subjective symptoms, conjunctival injection, and corneal epithelial integrity by fluorescein staining. The 60 subjects that participated ranged in age from 21 to 67 years (mean = 28.6 years), in eye color (32 light and 28 dark), and in refractive status (11 emmetropes, 42 myopes, and 7 hyperopes). The results demonstrated that the half dose was functionally equivalent to the full dose in reversing the effects of dilation with fewer subjective symptoms of discomfort. No dependent relationship was found between iris color and the two different doses of REV -EYES

Blocked All-Pairs Shortest Paths Algorithm on Intel Xeon Phi KNL Processor: A Case Study

Manycores are consolidating in HPC community as a way of improving performance while keeping power efficiency. Knights Landing is the recently released second generation of Intel Xeon Phi architecture. While optimizing applications on CPUs, GPUs and first Xeon Phi's has been largely studied in the last years, the new features in Knights Landing processors require the revision of programming and optimization techniques for these devices. In this work, we selected the Floyd-Warshall algorithm as a representative case study of graph and memory-bound applications. Starting from the default serial version, we show how data, thread and compiler level optimizations help the parallel implementation to reach 338 GFLOPS.Comment: Computer Science - CACIC 2017. Springer Communications in Computer and Information Science, vol 79