A chip-scale integrated cavity-electro-optomechanics platform

We present an integrated optomechanical and electromechanical nanocavity, in which a common mechanical degree of freedom is coupled to an ultrahigh-Q photonic crystal defect cavity and an electrical circuit. The sys- tem allows for wide-range, fast electrical tuning of the optical nanocavity resonances, and for electrical control of optical radiation pressure back-action effects such as mechanical amplification (phonon lasing), cooling, and stiffening. These sort of integrated devices offer a new means to efficiently interconvert weak microwave and optical signals, and are expected to pave the way for a new class of micro-sensors utilizing optomechanical back-action for thermal noise reduction and low-noise optical read-out.Comment: 11 pages, 7 figure

Using dark modes for high-fidelity optomechanical quantum state transfer

In a recent publication [Y.D. Wang and A.A. Clerk, Phys. Rev. Lett. 108, 153603 (2012)], we demonstrated that one can use interference to significantly increase the fidelity of state transfer between two electromagnetic cavities coupled to a common mechanical resonator over a naive sequential-transfer scheme based on two swap operations. This involved making use of a delocalized electromagnetic mode which is decoupled from the mechanical resonator, a so-called "mechanically-dark" mode. Here, we demonstrate the existence of a new "hybrid" state transfer scheme which incorporates the best elements of the dark-mode scheme (protection against mechanical dissipation) and the double-swap scheme (fast operation time). Importantly, this new scheme also does not require the mechanical resonator to be prepared initially in its ground state. We also provide additional details on the previously-described interference-enhanced transfer schemes, and provide an enhanced discussion of how the interference physics here is intimately related to the optomechanical analogue of electromagnetically-induced transparency (EIT). We also compare the various transfer schemes over a wide range of relevant experimental parameters, producing a "phase diagram" showing the the optimal transfer scheme for different points in parameter space.Comment: 39 pages, 11 figures NJP 14 (Focus issue on Optomechanics

Optomechanical circuits for nanomechanical continuous variable quantum state processing

We propose and analyze a nanomechanical architecture where light is used to perform linear quantum operations on a set of many vibrational modes. Suitable amplitude modulation of a single laser beam is shown to generate squeezing, entanglement, and state-transfer between modes that are selected according to their mechanical oscillation frequency. Current optomechanical devices based on photonic crystals may provide a platform for realizing this scheme.Comment: 11 pages, 5 figure

Continuous mode cooling and phonon routers for phononic quantum networks

We study the implementation of quantum state transfer protocols in phonon networks, where in analogy to optical networks, quantum information is transmitted through propagating phonons in extended mechanical resonator arrays or phonon waveguides. We describe how the problem of a non-vanishing thermal occupation of the phononic quantum channel can be overcome by implementing optomechanical multi- and continuous mode cooling schemes to create a 'cold' frequency window for transmitting quantum states. In addition, we discuss the implementation of phonon circulators and switchable phonon routers, which rely on strong coherent optomechanical interactions only, and do not require strong magnetic fields or specific materials. Both techniques can be applied and adapted to various physical implementations, where phonons coupled to spin or charge based qubits are used for on-chip networking applications.Comment: 33 pages, 8 figures. Final version, a few minor changes and updated reference

Cavity optomechanics with Si3N4 membranes at cryogenic temperatures

We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to a phonon occupation of less than 10, starting at a bath temperature of 5 kelvin. We show that even at cold temperatures thermally-occupied mechanical modes of the cavity elements can be a limitation, and we discuss methods to reduce these effects sufficiently to achieve ground state cooling. This promising new platform should have versatile uses for hybrid devices and searches for radiation pressure shot noise.Comment: 19 pages, 5 figures, submitted to New Journal of Physic

Phonon number measurements using single photon opto-mechanics

We describe a system composed of two coupled optical cavity modes with a coupling modulated by a bulk mechanical resonator. In addition, one of the cavity modes is irreversibly coupled to a single photon source. Our scheme is an opto-mechanical realisation of the Jaynes-Cummings model where the qubit is a dual rail optical qubit while the bosonic degree of freedom is a matter degree of freedom realised as the bulk mechanical excitation. We show the possibility of engineering phonon number states of the mechanical oscillator in such a system by computing the conditional state of the mechanics after successive photon counting measurements

Electromagnetically Induced Transparency and Slow Light with Optomechanics

Controlling the interaction between localized optical and mechanical excitations has recently become possible following advances in micro- and nano-fabrication techniques. To date, most experimental studies of optomechanics have focused on measurement and control of the mechanical subsystem through its interaction with optics, and have led to the experimental demonstration of dynamical back-action cooling and optical rigidity of the mechanical system. Conversely, the optical response of these systems is also modified in the presence of mechanical interactions, leading to strong nonlinear effects such as Electromagnetically Induced Transparency (EIT) and parametric normal-mode splitting. In atomic systems, seminal experiments and proposals to slow and stop the propagation of light, and their applicability to modern optical networks, and future quantum networks, have thrust EIT to the forefront of experimental study during the last two decades. In a similar fashion, here we use the optomechanical nonlinearity to control the velocity of light via engineered photon-phonon interactions. Our results demonstrate EIT and tunable optical delays in a nanoscale optomechanical crystal device, fabricated by simply etching holes into a thin film of silicon (Si). At low temperature (8.7 K), we show an optically-tunable delay of 50 ns with near-unity optical transparency, and superluminal light with a 1.4 microseconds signal advance. These results, while indicating significant progress towards an integrated quantum optomechanical memory, are also relevant to classical signal processing applications. Measurements at room temperature and in the analogous regime of Electromagnetically Induced Absorption (EIA) show the utility of these chip-scale optomechanical systems for optical buffering, amplification, and filtering of microwave-over-optical signals.Comment: 15 pages, 9 figure

Coherent coupling between radio frequency, optical, and acoustic waves in piezo-optomechanical circuits

The interaction of optical and mechanical modes in nanoscale optomechanical systems has been widely studied for applications ranging from sensing to quantum information science. Here, we develop a platform for cavity optomechanical circuits in which localized and interacting 1550 nm photons and 2.4 GHz phonons are combined with photonic and phononic waveguides. Working in GaAs facilitates manipulation of the localized mechanical mode either with a radio frequency field through the piezo-electric effect, or optically through the strong photoelastic effect. We use this to demonstrate a novel acoustic wave interference effect, analogous to coherent population trapping in atomic systems, in which the coherent mechanical motion induced by the electrical drive can be completely cancelled out by the optically-driven motion. The ability to manipulate cavity optomechanical systems with equal facility through either photonic or phononic channels enables new device and system architectures for signal transduction between the optical, electrical, and mechanical domains

Comparative study of alternative Geant4 hadronic ion inelastic physics models for prediction of positron-emitting radionuclide production in carbon and oxygen ion therapy

© 2019 Commonwealth of Australia, Australian Nuclear Science and Technology Organisation, ANSTO.. The distribution of fragmentation products predicted by Monte Carlo simulations of heavy ion therapy depend on the hadronic physics model chosen in the simulation. This work aims to evaluate three alternative hadronic inelastic fragmentation physics options available in the Geant4 Monte Carlo radiation physics simulation framework to determine which model most accurately predicts the production of positron-emitting fragmentation products observable using in-beam PET imaging. Fragment distributions obtained with the BIC, QMD, and INCL + + physics models in Geant4 version 10.2.p03 are compared to experimental data obtained at the HIMAC heavy-ion treatment facility at NIRS in Chiba, Japan. For both simulations and experiments, monoenergetic beams are applied to three different block phantoms composed of gelatin, poly(methyl methacrylate) and polyethylene. The yields of the positron-emitting nuclei 11C, 10C and 15O obtained from simulations conducted with each model are compared to the experimental yields estimated by fitting a multi-exponential radioactive decay model to dynamic PET images using the normalised mean square error metric in the entrance, build up/Bragg peak and tail regions. Significant differences in positron-emitting fragment yield are observed among the three physics models with the best overall fit to experimental 12C and 16O beam measurements obtained with the BIC physics model

Strong dispersive coupling between a mechanical resonator and a fluxonium superconducting qubit

We demonstrate strong dispersive coupling between a fluxonium superconducting qubit and a 690 megahertz mechanical oscillator, extending the reach of circuit quantum acousto-dynamics (cQAD) experiments into a new range of frequencies. We have engineered a qubit-phonon coupling rate of $g\approx2\pi\times14~\text{MHz}$, and achieved a dispersive interaction that exceeds the decoherence rates of both systems while the qubit and mechanics are highly nonresonant ($\Delta/g\gtrsim10$). Leveraging this strong coupling, we perform phonon number-resolved measurements of the mechanical resonator and investigate its dissipation and dephasing properties. Our results demonstrate the potential for fluxonium-based hybrid quantum systems, and a path for developing new quantum sensing and information processing schemes with phonons at frequencies below 700 MHz to significantly expand the toolbox of cQAD.Comment: 22 pages, 12 figure