3,171 research outputs found
A simulation model of time-dependent plasma-spacecraft interactions
A plasma simulation code is presented that models the time-dependent plasma properties in the vicinity of a spherical, charged spacecraft. After showing agreement with analytic, steady-state theories and ATS-6 satellite data, the following three problems are treated: (1) transient pulses from photoemission at various emission temperatures and ambient plasma conditions, (2) spacecharge limited emission, and (3) simulated plasma oscillations in the long wavelength limit
The effect of different assembly loads on taper junction fretting wear in total hip replacements
Variability in the magnitude of the impaction force applied by surgeons to assemble a hip prosthetic head to a femoral stem could be a cause of increased wear in taper junctions. This study investigates the effect of varying the magnitude of the assembly force on fretting wear at the taper over a 10 year period using a 3D finite element model and wear algorithm. It is demonstrated that an increase in assembly force results in a reduction in fretting wear and it is recommended that surgeons should apply an impact force of at least 4 kN to minimise wear rates. The wear patterns and wear rates presented are comparable with observation and measurement of those seen in retrieved prostheses
A computational approach to fretting wear prediction at the head-stem taper junction of total hip replacements
Wear is one of the main reasons for failure of modular total hip replacements. Recent evidence suggests that fretting wear occurs at the taper junction which provides fixation between the prosthesis femoral head and stem components. The fine metallic wear debris that is released can lead to adverse soft-tissue reactions which can necessitate a revision surgery. The present study proposes a computational methodology utilising an energy wear law and a 3D finite element model to predict fretting wear at the taper junction. The method is novel in that it simulates the weakening of the initial taper âfixationâ (created at impaction of the head onto the stem in surgery) due to the wearing process. The taper fixation is modelled using a contact analysis with overlapped meshes at the taper junction. The reduction in fixation is modelled by progressive removal of the overlap between components based on calculated wear. The fretting wear analysis approach has been shown to model the evolution of wear effectively; however, it has been shown that accurate, quantitative values for wear are critically dependant on mesh refinement, wear scaling factor and fraction, wear coefficient used and knowledge of the device loading history. The method has been implemented with a 3D finite element model of the taper junction of a commercial total hip replacement. This has been used to determine taper wear patterns, wear damage and wear rates which have been shown to be consistant with those found from observation and measurement of retrieved prostheses. The numerical method could be used to consider the effect of design changes and clinical technique on subsequent fretting wear in modular prosthetic devices
Improving the geometry of manholes designed for separate sewer systems
The design of manholes dates back more than 100 years. However, there have been developments such as the use of new materials for the manufacture of manholes, and advances in inspection and maintenance technologies, allowing improvements to the shape of manholes. This paper presents an innovative design for manholes, created to overcome the challenges associated with the installation of separate sewer systems in narrow streets, common to both UK and EU cities. The traditional separate sewer system has two separate manholes. The proposed manhole combines these two manholes into one structure, with two separate chambers, to allow storm flow and foul flow to pass through the same manhole without mixing. The structural performance of the new design has been tested using mathematical modelling validated by experimental tests. The results are compared with the structural performance of traditional manholes. The new design shows an improved resistance to high live loads
New insights into cortico-basal-cerebellar connectome: clinical and physiological considerations
The current model of the basal ganglia system based on the 'direct', 'indirect' and 'hyperdirect' pathways provides striking predictions about basal ganglia function that have been used to develop deep brain stimulation approaches for Parkinson's disease and dystonia. The aim of this review is to challenge this scheme in light of new tract tracing information that has recently become available from the human brain using MRI-based tractography, thus providing a novel perspective on the basal ganglia system. We also explore the implications of additional direct pathways running from cortex to basal ganglia and between basal ganglia and cerebellum in the pathophysiology of movement disorders
Plasticity Induced in the Human Spinal Cord by Focal Muscle Vibration
The spinal cord spinal cord has in the past been considered a hardwired system which responds to inputs in a stereotyped way. A growing body of data have instead demonstrated its ability to retain information and modify its effector capabilities, showing activity-dependent plasticity. Whereas, plasticity in the spinal cord is well documented after different forms of physical exercise, whether exogenous stimulation can induce similar changes is still a matter of debate. This issue is both of scientific and clinical relevance, since at least one form of stimulation, i.e., focal muscle vibration (fMV), is currently used as a treatment for spasticity. The aim of the present study was to assess whether fMV can induce plasticity at the SC level when applied to different muscles of the upper limb. Changes in different electrophysiological measures, such as H-reflex testing homonymous and heteronymous pathways, reciprocal inhibition and somatosensory evoked potentials were used as outcomes. We found that fMV was able to induce long-term depression-like plasticity in specific spinal cord circuits depending on the muscle vibrated. These findings helped understand the basic mechanisms underlying the effects of fMV and might help to develop more advanced stimulation protocols
GSH23.0-0.7+117, a neutral hydrogen shell in the inner Galaxy
GSH23.0-0.7+117 is a well-defined neutral hydrogen shell discovered in the
VLA Galactic Plane Survey (VGPS). Only the blueshifted side of the shell was
detected. The expansion velocity and systemic velocity were determined through
the systematic behavior of the HI emission with velocity. The center of the
shell is at (l,b,v)=(23.05,-0.77,+117 km/s). The angular radius of the shell is
6.8', or 15 pc at a distance of 7.8 kpc. The HI mass divided by the volume of
the half-shell implies an average density n_H = 11 +/- 4 cm^{-3} for the medium
in which the shell expanded. The estimated age of GSH23.0-0.7+117 is 1 Myr,
with an upper limit of 2 Myr. The modest expansion energy of 2 * 10^{48} erg
can be provided by the stellar wind of a single O4 to O8 star over the age of
the shell. The 3 sigma upper limit to the 1.4 GHz continuum flux density
(S_{1.4} < 248 mJy) is used to derive an upper limit to the Lyman continuum
luminosity generated inside the shell. This upper limit implies a maximum of
one O9 star (O8 to O9.5 taking into account the error in the distance) inside
the HI shell, unless most of the incident ionizing flux leaks through the HI
shell. To allow this, the shell should be fragmented on scales smaller than the
beam (2.3 pc). If the stellar wind bubble is not adiabatic, or the bubble has
burst (as suggested by the HI channel maps), agreement between the energy and
ionization requirements is even less likely. The limit set by the non-detection
in the continuum provides a significant challenge for the interpretation of
GSH23.0-0.7+117 as a stellar wind bubble. A similar analysis may be applicable
to other Galactic HI shells that have not been detected in the continuum.Comment: 18 pages, 6 figures. Figures 1 and 4 separately in GIF format.
Accepted for publication in Astrophysical Journa
Experimental data used to validate the FE model of the structural performance of two flexible pipes laid in a single trench.
The objective of the article is to describe the methodology followed to validate the finite element model for the new method of setting pipes in a separate sewer system, using one trench to accommodate the storm pipe over the sanitary pipe "doi.org/10.1016/j.tust.2019.103019" (Abbas et al., 2019). A physical model was established in the Liverpool John Moores University (LJMU) lab to test the structural performance of two PVC pipes buried in one trench. The results of the physical model were used to validate an FE model using the same material properties and boundary conditions used in the physical model. The validation process allowed the FE model to be upgraded to a 3D FE full-scale model for testing the novel method used to place the separate sewer system
Investigation of the structural performance of two flexible pipes set in one trench with a new placement method for separate sewer systems
Substantial research has been conducted on single flexible pipes buried in a trench. In contrast, the objective of this study is to determine the structural performance of two buried flexible sewer pipes positioned one over the other in a single trench. An innovative configuration is designed, based around the use of an innovative manhole structure which can accommodate both foul and surface water, to solve the challenges associated with constructing separate sewer systems in narrow streets while providing additional space for other infrastructure services. The behaviours of the two flexible pipes were tested using a 3D finite element (FE) model validated with experimental data from a laboratory investigation. A modified DruckerâPrager cap soil constitutive model was used to simulate the elasto-plastic soil behaviour. The results show that this approach comprising the use of a large-diameter flexible pipe set above a small-diameter flexible pipe mitigates the strain on the smaller pipe and decreases the total deflections of both pipes and the soil
- âŠ