274 research outputs found
Recommended from our members
Search for chargino–neutralino pair production in final states with three leptons and missing transverse momentum in √s=13 TeV pp collisions with the ATLAS detector
A search for charginoneutralino pair production in three-lepton final
states with missing transverse momentum is presented. The study is based on a
dataset of TeV collisions recorded with the ATLAS detector
at the LHC, corresponding to an integrated luminosity of 139 fb. No
significant excess relative to the Standard Model predictions is found in data.
The results are interpreted in simplified models of supersymmetry, and
statistically combined with results from a previous ATLAS search for compressed
spectra in two-lepton final states. Various scenarios for the production and
decay of charginos () and neutralinos () are
considered. For pure higgsino pair-production
scenarios, exclusion limits at 95% confidence level are set on
masses up to 210 GeV. Limits are also set for pure wino
pair production, on masses up
to 640 GeV for decays via on-shell and bosons, up to 300 GeV for decays
via off-shell and bosons, and up to 190 GeV for decays via and
Standard Model Higgs bosons
Recommended from our members
Electroweak, QCD and flavour physics studies with ATLAS data from Run 2 of the LHC
A summary of precision measurements sensitive to electroweak, QCD and quark-flavour effects performed by the ATLAS Collaboration at the Large Hadron Collider is reported. The measurements are predominantly performed on proton–proton () collision data recorded at a centre-of-mass energy of 13 TeV taken from 2015 to 2018, with an integrated luminosity of up to 140 fb−1, with some results based on and Pb+Pb data recorded at lower nucleon centre-of-mass energies. The results cover a wide range of topics, from strong production of particles at low energies and the spectroscopy of hadrons to perturbative QCD with hadronic jets and electroweak and strong production of single and multiple vector bosons. They provide precise measurements of fundamental constants and stringent tests of the Standard Model with unprecedented precision and in energy ranges never explored before. They are also used to explore the proton structure and to perform model-independent searches for new physics.</p
Recommended from our members
Measurement of vector boson production cross sections and their ratios using pp collisions at s=13.6 TeV with the ATLAS detector
Fiducial and total W± and Z boson cross sections, their ratios and the ratio of top-antitop-quark pair and W-boson fiducial cross sections are measured in proton–proton collisions at a centre-of-mass energy of s=13.6 TeV, corresponding to an integrated luminosity of 29 fb−1 of data collected in 2022 by the ATLAS experiment at the Large Hadron Collider. The measured fiducial cross-section values for W+→ℓ+ν, W−→ℓ−ν¯, and Z→ℓ+ℓ− (ℓ=e or μ) boson productions are 4250±150 pb, 3310±120 pb, and 744±20 pb, respectively, where the uncertainty is the total uncertainty, including that arising from the luminosity of about 2.2%. The measurements are in agreement with Standard-Model predictions calculated at next-to-next-to-leading-order in αs, next-to-next-to-leading logarithmic accuracy and next-to-leading-order electroweak accuracy.</p
Recommended from our members
Measurements of electroweak W<sup>±</sup> Z boson pair production in association with two jets in pp collisions at s = 13 TeV with the ATLAS detector
Measurements of integrated and differential cross-sections for electroweak W±Z production in association with two jets (W±Zjj) in proton-proton collisions are presented. The data collected by the ATLAS detector at the Large Hadron Collider from 2015 to 2018 at a centre-of-mass energy of s = 13 TeV are used, corresponding to an integrated luminosity of 140 fb−1. The W±Zjj candidate events are reconstructed using leptonic decay modes of the gauge bosons. Events containing three identified leptons, either electrons or muons, and two jets are selected. Processes involving pure electroweak W±Zjj production at Born level are separated from W±Zjj production involving a strong coupling. The measured integrated fiducial cross-section of electroweak W±Zjj production per lepton flavour is σWZjj−EW→ℓ′νlljj = 0.368 ± 0.037 (stat.) ± 0.059 (syst.) ± 0.003 (lumi.) fb, where ℓ and ℓ′ are either an electron or a muon. Respective cross-sections of electroweak and strong W±Zjj production are measured separately for events with exactly two jets or with more than two jets, and in three bins of the invariant mass of the two jets. The inclusive W±Zjj production cross-section, without separating electroweak and strong production, is also measured to be σWZjj→ℓ′νlljj = 1.462 ± 0.063 (stat.) ± 0.118 (syst.) ± 0.012 (lumi.) fb, per lepton flavour. The inclusive W±Zjj production cross-section is measured differentially for several kinematic observables. Finally, the measurements are used to constrain anomalous quartic gauge couplings by extracting 95% confidence level intervals on dimension-8 operators.</p
Recommended from our members
Measurement of the top quark mass with the ATLAS detector using tt¯ events with a high transverse momentum top quark
The mass of the top quark is measured using top-quark-top-antiquark pair events with high transverse momentum top quarks. The dataset, collected with the ATLAS detector in proton–proton collisions at TeV delivered by the Large Hadron Collider, corresponds to an integrated luminosity of 140 fb−1. The analysis targets events in the lepton-plus-jets decay channel, with an electron or muon from a semi-leptonically decaying top quark and a hadronically decaying top quark that is sufficiently energetic to be reconstructed as a single large-radius jet. The mean of the invariant mass of the reconstructed large-radius jet provides the sensitivity to the top quark mass and is simultaneously fitted with two additional observables to reduce the impact of the systematic uncertainties. The top quark mass is measured to be GeV, which is the most precise ATLAS measurement from a single channel.</p
Recommended from our members
Observation of VVZ production at s=13 TeV with the ATLAS detector
A search for the production of three massive vector bosons, , in proton–proton collisions at TeV is performed using data with an integrated luminosity of 140 fb−1 recorded by the ATLAS detector at the Large Hadron Collider. Events produced in the leptonic final states (), , , and the semileptonic final states and , are analysed. The measured cross section for the process is fb, and the observed (expected) significance is 6.4 (4.7) standard deviations, representing the observation of VVZ production. In addition, the measured cross section for the process is fb, and the observed (expected) significance is 4.4 (3.6) standard deviations, representing evidence of WWZ production. The measured cross sections are consistent with the Standard Model predictions. Constraints on physics beyond the Standard Model are also derived in the effective field theory framework by setting limits on Wilson coefficients for dimension-8 operators describing anomalous quartic gauge boson couplings.</p
Recommended from our members
Beam-induced backgrounds measured in the ATLAS detector during local gas injection into the LHC beam vacuum
Inelastic beam-gas collisions at the Large Hadron Collider (LHC), within a few hundred metres of the ATLAS experiment, are known to give the dominant contribution to beam backgrounds. These are monitored by ATLAS with a dedicated Beam Conditions Monitor (BCM) and with the rate of fake jets in the calorimeters. These two methods are complementary since the BCM probes backgrounds just around the beam pipe while fake jets are observed at radii of up to several metres. In order to quantify the correlation between the residual gas density in the LHC beam vacuum and the experimental backgrounds recorded by ATLAS, several dedicated tests were performed during LHC Run 2. Local pressure bumps, with a gas density several orders of magnitude higher than during normal operation, were introduced at different locations. The changes of beam-related backgrounds, seen in ATLAS, are correlated with the local pressure variation. In addition the rates of beam-gas events are estimated from the pressure measurements and pressure bump profiles obtained from calculations. Using these rates, the efficiency of the ATLAS beam background monitors to detect beam-gas events is derived as a function of distance from the interaction point. These efficiencies and characteristic distributions of fake jets from the beam backgrounds are found to be in good agreement with results of beam-gas simulations performed with the Fluka Monte Carlo programme.</p
Recommended from our members
Search for pair production of boosted Higgs bosons via vector-boson fusion in the bb¯bb¯ final state using pp collisions at s=13TeV with the ATLAS detector
A search for Higgs boson pair production via vector-boson fusion is performed in the Lorentz-boosted regime, where a Higgs boson candidate is reconstructed as a single large-radius jet, using 140 fb−1 of proton–proton collision data at s=13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Only Higgs boson decays into bottom quark pairs are considered. The search is particularly sensitive to the quartic coupling between two vector bosons and two Higgs bosons relative to its Standard Model prediction, κ2V. This study constrains κ2V to 0.55</p
Recommended from our members
Combination of searches for heavy spin-1 resonances using 139 fb<sup>−1</sup> of proton-proton collision data at s = 13 TeV with the ATLAS detector
A combination of searches for new heavy spin-1 resonances decaying into different pairings of W, Z, or Higgs bosons, as well as directly into leptons or quarks, is presented. The data sample used corresponds to 139 fb−1 of proton-proton collisions at s = 13 TeV collected during 2015–2018 with the ATLAS detector at the CERN Large Hadron Collider. Analyses selecting quark pairs (qq, bb, tt¯, and tb) or third-generation leptons (τν and ττ) are included in this kind of combination for the first time. A simplified model predicting a spin-1 heavy vector-boson triplet is used. Cross-section limits are set at the 95% confidence level and are compared with predictions for the benchmark model. These limits are also expressed in terms of constraints on couplings of the heavy vector-boson triplet to quarks, leptons, and the Higgs boson. The complementarity of the various analyses increases the sensitivity to new physics, and the resulting constraints are stronger than those from any individual analysis considered. The data exclude a heavy vector-boson triplet with mass below 5.8 TeV in a weakly coupled scenario, below 4.4 TeV in a strongly coupled scenario, and up to 1.5 TeV in the case of production via vector-boson fusion.</p
Recommended from our members
An implementation of neural simulation-based inference for parameter estimation in ATLAS
Neural simulation-based inference (NSBI) is a powerful class of machine-learning-based methods for statistical inference that naturally handles high-dimensional parameter estimation without the need to bin data into low-dimensional summary histograms. Such methods are promising for a range of measurements, including at the Large Hadron Collider, where no single observable may be optimal to scan over the entire theoretical phase space under consideration, or where binning data into histograms could result in a loss of sensitivity. This work develops a NSBI framework for statistical inference, using neural networks to estimate probability density ratios, which enables the application to a full-scale analysis. It incorporates a large number of systematic uncertainties, quantifies the uncertainty due to the finite number of events in training samples, develops a method to construct confidence intervals, and demonstrates a series of intermediate diagnostic checks that can be performed to validate the robustness of the method. As an example, the power and feasibility of the method are assessed on simulated data for a simplified version of an off-shell Higgs boson couplings measurement in the four-lepton final states. This approach represents an extension to the standard statistical methodology used by the experiments at the Large Hadron Collider, and can benefit many physics analyses.</p
- …
