Simultaneous identification, tracking control and disturbance rejection of uncertain nonlinear dynamics systems: A unified neural approach

Previous works of traditional zeroing neural networks (or termed Zhang neural networks, ZNN) show great success for solving specific time-variant problems of known systems in an ideal environment. However, it is still a challenging issue for the ZNN to effectively solve time-variant problems for uncertain systems without the prior knowledge. Simultaneously, the involvement of external disturbances in the neural network model makes it even hard for time-variant problem solving due to the intensively computational burden and low accuracy. In this paper, a unified neural approach of simultaneous identification, tracking control and disturbance rejection in the framework of the ZNN is proposed to address the time-variant tracking control of uncertain nonlinear dynamics systems (UNDS). The neural network model derived by the proposed approach captures hidden relations between inputs and outputs of the UNDS. The proposed model shows outstanding tracking performance even under the influences of uncertainties and disturbances. Then, the continuous-time model is discretized via Euler forward formula (EFF). The corresponding discrete algorithm and block diagram are also presented for the convenience of implementation. Theoretical analyses on the convergence property and discretization accuracy are presented to verify the performance of the neural network model. Finally, numerical studies, robot applications, performance comparisons and tests demonstrate the effectiveness and advantages of the proposed neural network model for the time-variant tracking control of UNDS

Model-based recurrent neural network for redundancy resolution of manipulator with remote centre of motion constraints

Redundancy resolution is a critical issue to achieve accurate kinematic control for manipulators. End-effectors of manipulators can track desired paths well with suitable resolved joint variables. In some manipulation applications such as selecting insertion paths to thrill through a set of points, it requires the distal link of a manipulator to translate along such fixed point and then perform manipulation tasks. The point is known as remote centre of motion (RCM) to constrain motion planning and kinematic control of manipulators. Together with its end-effector finishing path tracking tasks, the redundancy resolution of a manipulators has to maintain RCM to produce reliable resolved joint angles. However, current existing redundancy resolution schemes on manipulators based on recurrent neural networks (RNNs) mainly are focusing on unrestricted motion without RCM constraints considered. In this paper, an RNN-based approach is proposed to solve the redundancy resolution issue with RCM constraints, developing a new general dynamic optimisation formulation containing the RCM constraints. Theoretical analysis shows the theoretical derivation and convergence of the proposed RNN for redundancy resolution of manipulators with RCM constraints. Simulation results further demonstrate the efficiency of the proposed method in end-effector path tracking control under RCM constraints based on an industrial redundant manipulator system

Special Topics in Information Technology

This open access book presents outstanding doctoral dissertations in Information Technology from the Department of Electronics, Information and Bioengineering, Politecnico di Milano, Italy. Information Technology has always been highly interdisciplinary, as many aspects have to be considered in IT systems. The doctoral studies program in IT at Politecnico di Milano emphasizes this interdisciplinary nature, which is becoming more and more important in recent technological advances, in collaborative projects, and in the education of young researchers. Accordingly, the focus of advanced research is on pursuing a rigorous approach to specific research topics starting from a broad background in various areas of Information Technology, especially Computer Science and Engineering, Electronics, Systems and Control, and Telecommunications. Each year, more than 50 PhDs graduate from the program. This book gathers the outcomes of the best theses defended in 2021-22 and selected for the IT PhD Award. Each of the authors provides a chapter summarizing his/her findings, including an introduction, description of methods, main achievements and future work on the topic. Hence, the book provides a cutting-edge overview of the latest research trends in Information Technology at Politecnico di Milano, presented in an easy-to-read format that will also appeal to non-specialists

Special Topics in Information Technology

This open access book presents outstanding doctoral dissertations in Information Technology from the Department of Electronics, Information and Bioengineering, Politecnico di Milano, Italy. Information Technology has always been highly interdisciplinary, as many aspects have to be considered in IT systems. The doctoral studies program in IT at Politecnico di Milano emphasizes this interdisciplinary nature, which is becoming more and more important in recent technological advances, in collaborative projects, and in the education of young researchers. Accordingly, the focus of advanced research is on pursuing a rigorous approach to specific research topics starting from a broad background in various areas of Information Technology, especially Computer Science and Engineering, Electronics, Systems and Control, and Telecommunications. Each year, more than 50 PhDs graduate from the program. This book gathers the outcomes of the best theses defended in 2021-22 and selected for the IT PhD Award. Each of the authors provides a chapter summarizing his/her findings, including an introduction, description of methods, main achievements and future work on the topic. Hence, the book provides a cutting-edge overview of the latest research trends in Information Technology at Politecnico di Milano, presented in an easy-to-read format that will also appeal to non-specialists

Inverse Dynamics Problems

The inverse dynamics problem was developed in order to provide researchers with the state of the art in inverse problems for dynamic and vibrational systems. Contrasted with a forward problem, which solves for the system output in a straightforward manner, an inverse problem searches for the system input through a procedure contaminated with errors and uncertainties. An inverse problem, with a focus on structural dynamics, determines the changes made to the system and estimates the inputs, including forces and moments, to the system, utilizing measurements of structural vibration responses only. With its complex mathematical structure and need for more reliable input estimations, the inverse problem is still a fundamental subject of research among mathematicians and engineering scientists. This book contains 11 articles that touch upon various aspects of inverse dynamic problems

Mechatronic Systems

Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools

Genetic-Based Optimisation Technique for the Development of Automated Inspection and Restoration Systems for Bridges

Automation and robotics are receiving significant attention in the field of inspection and restoration of steel bridges. However, the success level of the field implementations depends on numerous technological factors. This dissertation addresses aspects of the design, development and subsequent implementation of such on-site devices. The restoration process poses a high level of health hazard and carries environmental pollution risk. For these reasons, it is high on the consideration list for automation. The varied scale and geometry of bridges are some of the limiting conditions for performing the inspection and restoration tasks. Further aspects of concern are access provisions, the diversity of tasks required in the assessment and restoration of a bridge and compatibility between the operational characteristics of the automated device, tasks layout and direction of approach. The key factors, which arise as a result of the above analysis, are access, mobility, navigation, manipulation, probe change and control. In order to efficiently produce design alternatives, based on the industry (customers and designers) requirements, the engineering design framework is adopted. Due to the growing complexity of the required devices, new methodologies and approaches are needed. This dissertation presents a design methodology to generate alternatives for further considerations. The author's work combines: (i) research and suitability assessment of the existing enabling technologies, (ii) extensive task selection and analysis, (iii) incorporation of the industry requirements for generating the set of design criteria, and (iv) an innovative application of Genetic Algorithms. GA is used as a tool for simultaneous optimisation of the robot’s kinematic parameters, based on the criteria of collision and singularity avoidance, percentage of coverage, productivity and dexterity. Analysis and justification of a two-step approach is presented, with the former combining all the parameters, and the latter handling the chosen criteria. The methodology is then tested and verified on an existing construction robot (MPIR) from Technion. Finally, it is applied to two case studies, spherical and articulated manipulators performing a range of restoration activities on a selected bridge geometry model. A sensitivity analysis was also carried out on each case study in order to identify areas where improvements could be made. In general, the methodology is successful in choosing the more task-suitable manipulator and optimising the ranges of its kinematic parameters. This could be extended to optimise other parameters according to a set of alternative criteria. In doing so, it can bridge over several phases of the engineering design with a single approach

Long-duration robot autonomy: From control algorithms to robot design

The transition that robots are experiencing from controlled and often static working environments to unstructured and dynamic settings is unveiling the potential fragility of the design and control techniques employed to build and program them, respectively. A paramount of example of a discipline that, by construction, deals with robots operating under unknown and ever-changing conditions is long-duration robot autonomy. In fact, during long-term deployments, robots will find themselves in environmental scenarios which were not planned and accounted for during the design phase. These operating conditions offer a variety of challenges which are not encountered in any other discipline of robotics. This thesis presents control-theoretic techniques and mechanical design principles to be employed while conceiving, building, and programming robotic systems meant to remain operational over sustained amounts of time. Long-duration autonomy is studied and analyzed from two different, yet complementary, perspectives: control algorithms and robot design. In the context of the former, the persistification of robotic tasks is presented. This consists of an optimization-based control framework which allows robots to remain operational over time horizons that are much longer than the ones which would be allowed by the limited resources of energy with which they can ever be equipped. As regards the mechanical design aspect of long-duration robot autonomy, in the second part of this thesis, the SlothBot, a slow-paced solar-powered wire-traversing robot, is presented. This robot embodies the design principles required by an autonomous robotic system 1in order to remain functional for truly long periods of time, including energy efficiency, design simplicity, and fail-safeness. To conclude, the development of a robotic platform which stands at the intersection of design and control for long-duration autonomy is described. A class of vibration-driven robots, the brushbots, are analyzed both from a mechanical design perspective, and in terms of interaction control capabilities with the environment in which they are deployed.Ph.D

Active Training and Assistance Device for an Individually Adaptable Strength and Coordination Training

Das Altern der Weltbevölkerung, insbesondere in der westlichen Welt, stellt die Menschheit vor eine große Herausforderung. Zu erwarten sind erhebliche Auswirkungen auf den Gesundheitssektor, der im Hinblick auf eine steigende Anzahl von Menschen mit altersbedingtem körperlichem und kognitivem Abbau und dem damit erhöhten Bedürfnis einer individuellen Versorgung vor einer großen Aufgabe steht. Insbesondere im letzten Jahrhundert wurden viele wissenschaftliche Anstrengungen unternommen, um Ursache und Entwicklung altersbedingter Erkrankungen, ihr Voranschreiten und mögliche Behandlungen, zu verstehen. Die derzeitigen Modelle zeigen, dass der entscheidende Faktor für die Entwicklung solcher Krankheiten der Mangel an sensorischen und motorischen Einflüssen ist, diese wiederum sind das Ergebnis verringerter Mobilität und immer weniger neuer Erfahrungen. Eine Vielzahl von Studien zeigt, dass erhöhte körperliche Aktivität einen positiven Effekt auf den Allgemeinzustand von älteren Erwachsenen mit leichten kognitiven Beeinträchtigungen und den Menschen in deren unmittelbarer Umgebung hat. Diese Arbeit zielt darauf ab, älteren Menschen die Möglichkeit zu bieten, eigenständig und sicher ein individuelles körperliches Training zu absolvieren. In den letzten zwei Jahrzehnten hat die Forschung im Bereich der robotischen Bewegungsassistenten, auch Smarte Rollatoren genannt, den Fokus auf die sensorische und kognitive Unterstützung für ältere und eingeschränkte Personen gesetzt. Durch zahlreiche Bemühungen entstand eine Vielzahl von Ansätzen zur Mensch-Rollator-Interaktion, alle mit dem Ziel, Bewegung und Navigation innerhalb der Umgebung zu unterstützen. Aber trotz allem sind Trainingsmöglichkeiten zur motorischen Aktivierung mittels Smarter Rollatoren noch nicht erforscht. Im Gegensatz zu manchen Smarten Rollatoren, die den Fokus auf Rehabilitationsmöglichkeiten für eine bereits fortgeschrittene Krankheit setzen, zielt diese Arbeit darauf ab, kognitive Beeinträchtigungen in einem frühen Stadium soweit wie möglich zu verlangsamen, damit die körperliche und mentale Fitness des Nutzers so lang wie möglich aufrechterhalten bleibt. Um die Idee eines solchen Trainings zu überprüfen, wurde ein Prototyp-Gerät namens RoboTrainer-Prototyp entworfen, eine mobile Roboter-Plattform, die mit einem zusätzlichen Kraft-Momente-Sensor und einem Fahrradlenker als Eingabe-Schnittstelle ausgestattet wurde. Das Training beinhaltet vordefinierte Trainingspfade mit Markierungen am Boden, entlang derer der Nutzer das Gerät navigieren soll. Der Prototyp benutzt eine Admittanzgleichung, um seine Geschwindigkeit anhand der Eingabe des Nutzers zu berechnen. Desweiteren leitet das Gerät gezielte Regelungsaktionen bzw. Verhaltensänderungen des Roboters ein, um das Training herausfordernd zu gestalten. Die Pilotstudie, die mit zehn älteren Erwachsenen mit beginnender Demenz durchgeführt wurde, zeigte eine signifikante Steigerung ihrer Interaktionsfähigkeit mit diesem Gerät. Sie bewies ebenfalls den Nutzen von Regelungsaktionen, um die Komplexität des Trainings ständig neu anzupassen. Obwohl diese Studie die Durchführbarkeit des Trainings zeigte, waren Grundfläche und mechanische Stabilität des RoboTrainer-Prototyps suboptimal. Deswegen fokussiert sich der zweite Teil dieser Arbeit darauf, ein neues Gerät zu entwerfen, um die Nachteile des Prototyps zu beheben. Neben einer erhöhten mechanischen Stabilität, ermöglicht der RoboTrainer v2 eine Anpassung seiner Grundfläche. Dieses spezifische Merkmal der Smarten Rollatoren dient vor allem dazu, die Unterstützungsfläche für den Benutzer anzupassen. Das ermöglicht einerseits ein agiles Training mit gesunden Personen und andererseits Rehabilitations-Szenarien bei Menschen, die körperliche Unterstützung benötigen. Der Regelungsansatz für den RoboTrainer v2 erweitert den Admittanzregler des Prototypen durch drei adaptive Strategien. Die erste ist die Anpassung der Sensitivität an die Eingabe des Nutzers, abhängig von der Stabilität des Nutzer-Rollater-Systems, welche Schwankungen verhindert, die dann passieren können, wenn die Hände des Nutzers versteifen. Die zweite Anpassung beinhaltet eine neuartige nicht-lineare, geschwindigkeits-basierende Änderung der Admittanz-Parameter, um die Wendigkeit des Rollators zu erhöhen. Die dritte Anpassung erfolgt vor dem eigentlichen Training in einem Parametrierungsprozess, wo nutzereigene Interaktionskräfte gemessen werden, um individuelle Reglerkonstanten fein abzustimmen und zu berechnen. Die Regelungsaktionen sind Verhaltensänderungen des Gerätes, die als Bausteine für unterstützende und herausfordernde Trainingseinheiten mit dem RoboTrainer dienen. Sie nutzen das virtuelle Kraft-Feld-Konzept, um die Bewegung des Gerätes in der Trainingsumgebung zu beeinflussen. Die Bewegung des RoboTrainers wird in der Gesamtumgebung durch globale oder, in bestimmten Teilbereichen, durch räumliche Aktionen beeinflusst. Die Regelungsaktionen erhalten die Absicht des Nutzers aufrecht, in dem sie eine unabhängige Admittanzdynamik implementieren, um deren Einfluss auf die Geschwindigkeit des RoboTrainers zu berechnen. Dies ermöglicht die entscheidende Trennung von Reglerzuständen, um während des Trainings passive und sichere Interaktionen mit dem Gerät zu erreichen. Die oben genannten Beiträge wurden getrennt ausgewertet und in zwei Studien mit jeweils 22 bzw. 13 jungen, gesunden Erwachsenen untersucht. Diese Studien ermöglichen einen umfassenden Einblick in die Zusammenhänge zwischen unterschiedlichen Funktionalitäten und deren Einfluss auf die Nutzer. Sie bestätigen den gesamten Ansatz, sowie die gemachten Vermutungen im Hinblick auf die Gestaltung einzelner Teile dieser Arbeit. Die Einzelergebnisse dieser Arbeit resultieren in einem neuartigen Forschungsgerät für physische Mensch-Roboter-Interaktionen während des Trainings mit Erwachsenen. Zukünftige Forschungen mit dem RoboTrainer ebnen den Weg für Smarte Rollatoren als Hilfe für die Gesellschaft im Hinblick auf den bevorstehenden demographischen Wandel

Using MapReduce Streaming for Distributed Life Simulation on the Cloud

Distributed software simulations are indispensable in the study of large-scale life models but often require the use of technically complex lower-level distributed computing frameworks, such as MPI. We propose to overcome the complexity challenge by applying the emerging MapReduce (MR) model to distributed life simulations and by running such simulations on the cloud. Technically, we design optimized MR streaming algorithms for discrete and continuous versions of Conway’s life according to a general MR streaming pattern. We chose life because it is simple enough as a testbed for MR’s applicability to a-life simulations and general enough to make our results applicable to various lattice-based a-life models. We implement and empirically evaluate our algorithms’ performance on Amazon’s Elastic MR cloud. Our experiments demonstrate that a single MR optimization technique called strip partitioning can reduce the execution time of continuous life simulations by 64%. To the best of our knowledge, we are the first to propose and evaluate MR streaming algorithms for lattice-based simulations. Our algorithms can serve as prototypes in the development of novel MR simulation algorithms for large-scale lattice-based a-life models.https://digitalcommons.chapman.edu/scs_books/1014/thumbnail.jp