Reconfigurable Architectures for Cryptographic Systems

Field Programmable Gate Arrays (FPGAs) are suitable platforms for implementing cryptographic algorithms in hardware due to their flexibility, good performance and low power consumption. Computer security is becoming increasingly important and security requirements such as key sizes are quickly evolving. This creates the need for customisable hardware designs for cryptographic operations capable of covering a large design space. In this thesis we explore the four design dimensions relevant to cryptography - speed, area, power consumption and security of the crypto-system - by developing parametric designs for public-key generation and encryption as well as side-channel attack countermeasures. There are four contributions. First, we present new architectures for Montgomery multiplication and exponentiation based on variable pipelining and variable serial replication. Our implementations of these architectures are compared to the best implementations in the literature and the design space is explored in terms of speed and area trade-offs. Second, we generalise our Montgomery multiplier design ideas by developing a parametric model to allow rapid optimisation of a general class of algorithms containing loops with dependencies carried from one iteration to the next. By predicting the throughput and the area of the design, our model facilitates and speeds up design space exploration. Third, we develop new architectures for primality testing including the first hardware architecture for the NIST approved Lucas primality test. We explore the area, speed and power consumption trade-offs by comparing our Lucas architectures on CPU, FPGA and ASIC. Finally, we tackle the security issue by presenting two novel power attack countermeasures based on on-chip power monitoring. Our constant power framework uses a closed-loop control system to keep the power consumption of any FPGA implementation constant. Our attack detection framework uses a network of ring-oscillators to detect the insertion of a shunt resistor-based power measurement circuit on a device's power rail. This countermeasure is lightweight and has a relatively low power overhead compared to existing masking and hiding countermeasures

MEGA: Malleable Encryption Goes Awry

MEGA is a leading cloud storage platform with more than 250 million users and 1000 Petabytes of stored data. MEGA claims to offer user-controlled, end-to-end security. This is achieved by having all data encryption and decryption operations done on MEGA clients, under the control of keys that are only available to those clients. This is intended to protect MEGA users from attacks by MEGA itself, or by adversaries who have taken control of MEGA’s infrastructure. We provide a detailed analysis of MEGA’s use of cryptography in such a malicious server setting. We present five distinct attacks against MEGA, which together allow for a full compromise of the confidentiality of user files. Additionally, the integrity of user data is damaged to the extent that an attacker can insert malicious files of their choice which pass all authenticity checks of the client. We built proof-of-concept versions of all the attacks. Four of the five attacks are eminently practical. They have all been responsibly disclosed to MEGA and remediation is underway. Taken together, our attacks highlight significant shortcomings in MEGA’s cryptographic architecture. We present immediately deployable countermeasures, as well as longer-term recommendations. We also provide a broader discussion of the challenges of cryptographic deployment at massive scale under strong threat models

Fault attacks and countermeasures for elliptic curve cryptosystems

In this thesis we have developed a new algorithmic countermeasures that protect elliptic curve computation by protecting computation of the finite binary extension field, against fault attacks. Firstly, we have proposed schemes, i.e., a Chinese Remainder Theorem based fault tolerant computation in finite field for use in ECCs, as well as Lagrange Interpolation based fault tolerant computation. Our approach is based on the error correcting codes, i.e., redundant residue polynomial codes and the use of first original approach of Reed-Solomon codes. Computation of the field elements is decomposed into parallel, mutually independent, modular/identical channels, so that in case of faults at one channel, errors will not distribute to other channels. Based on these schemes we have developed new algorithms, namely fault tolerant residue representation modular multiplication algorithm and fault tolerant Lagrange representation modular multiplication algorithm, which are immune against error propagation under the fault models that we propose: Random Fault Model, Arbitrary Fault Model, and Single Bit Fault Model. These algorithms provide fault tolerant computation in GF (2k) for use in ECCs. Our new developed algorithms where inputs, i.e., field elements, are represented by the redundant residue representation/ redundant lagrange representation enables us to overcome the problem if during computation one, or both coordinates x, y GF (2k) of the point P E/GF (2k) /Fk are corrupted. We assume that during each run of an attacked algorithm, in one single attack, an adversary can apply any of the proposed fault models, i.e., either Random Fault Model, or Arbitrary Fault Model, or Single Bit Fault Model. In this way more channels can be targeted, i.e., different fault models can be used on different channels. Also, our proposed algorithms can have masked errors and will not be immune against attacks which can create those kind of errors, but it is a difficult problem to counter masked errors, since any anti-fault attack scheme will have some masked errors. Moreover, we have derived conditions that inflicted error needs to have in order to yield undetectable faulty point on non-supersingular elliptic curve over GF(2k). Our algorithmic countermeasures can be applied to any public key cryptosystem that performs computation over the finite field GF (2k)

暗号ハードウェアの形式的設計に関する研究

Tohoku University青木孝文課

On the Design and Improvement of Lattice-based Cryptosystems

Digital signatures and encryption schemes constitute arguably an integral part of cryptographic schemes with the goal to meet the security needs of present and future private and business applications. However, almost all public key cryptosystems applied in practice are put at risk due to its vulnerability to quantum attacks as a result of Shor's quantum algorithm. The magnitude of economic and social impact is tremendous inherently asking for alternatives replacing classical schemes in case large-scale quantum computers are built. Lattice-based cryptography emerged as a powerful candidate attracting lots of attention not only due to its conjectured resistance against quantum attacks, but also because of its unique security guarantee to provide worst-case hardness of average-case instances. Hence, the requirement of imposing further assumptions on the hardness of randomly chosen instances disappears, resulting in more efficient instantiations of cryptographic schemes. The best known lattice attack algorithms run in exponential time. In this thesis we contribute to a smooth transition into a world with practically efficient lattice-based cryptographic schemes. This is indeed accomplished by designing new algorithms and cryptographic schemes as well as improving existing ones. Our contributions are threefold. First, we construct new encryption schemes that fully exploit the error term in LWE instances. To this end, we introduce a novel computational problem that we call Augmented LWE (A-LWE), differing from the original LWE problem only in the way the error term is produced. In fact, we embed arbitrary data into the error term without changing the target distributions. Following this, we prove that A-LWE instances are indistinguishable from LWE samples. This allows to build powerful encryption schemes on top of the A-LWE problem that are simple in its representations and efficient in practice while encrypting huge amounts of data realizing message expansion factors close to 1. This improves, to our knowledge, upon all existing encryption schemes. Due to the versatility of the error term, we further add various security features such as CCA and RCCA security or even plug lattice-based signatures into parts of the error term, thus providing an additional mechanism to authenticate encrypted data. Based on the methodology to embed arbitrary data into the error term while keeping the target distributions, we realize a novel CDT-like discrete Gaussian sampler that beats the best known samplers such as Knuth-Yao or the standard CDT sampler in terms of running time. At run time the table size amounting to 44 elements is constant for every discrete Gaussian parameter and the total space requirements are exactly as large as for the standard CDT sampler. Further results include a very efficient inversion algorithm for ring elements in special classes of cyclotomic rings. In fact, by use of the NTT it is possible to efficiently check for invertibility and deduce a representation of the corresponding unit group. Moreover, we generalize the LWE inversion algorithm for the trapdoor candidate of Micciancio and Peikert from power of two moduli to arbitrary composed integers using a different approach. In the second part of this thesis, we present an efficient trapdoor construction for ideal lattices and an associated description of the GPV signature scheme. Furthermore, we improve the signing step using a different representation of the involved perturbation matrix leading to enhanced memory usage and running times. Subsequently, we introduce an advanced compression algorithm for GPV signatures, which previously suffered from huge signature sizes as a result of the construction or due to the requirement of the security proof. We circumvent this problem by introducing the notion of public and secret randomness for signatures. In particular, we generate the public portion of a signature from a short uniform random seed without violating the previous conditions. This concept is subsequently transferred to the multi-signer setting which increases the efficiency of the compression scheme in presence of multiple signers. Finally in this part, we propose the first lattice-based sequential aggregate signature scheme that enables a group of signers to sequentially generate an aggregate signature of reduced storage size such that the verifier is still able to check that each signer indeed signed a message. This approach is realized based on lattice-based trapdoor functions and has many application areas such as wireless sensor networks. In the final part of this thesis, we extend the theoretical foundations of lattices and propose new representations of lattice problems by use of Cauchy integrals. Considering lattice points as simple poles of some complex functions allows to operate on lattice points via Cauchy integrals and its generalizations. For instance, we can deduce for the one-dimensional and two-dimensional case simple expressions for the number of lattice points inside a domain using trigonometric or elliptic functions