Ring oscillator clocks and margins

How much margin do we have to add to the delay lines of a bundled-data circuit? This paper is an attempt to give a methodical answer to this question, taking into account all sources of variability and the existing EDA machinery for timing analysis and sign-off. The paper is based on the study of the margins of a ring oscillator that substitutes a PLL as clock generator. A timing model is proposed that shows that a 12% margin for delay lines can be sufficient to cover variability in a 65nm technology. In a typical scenario, performance and energy improvements between 15% and 35% can be obtained by using a ring oscillator instead of a PLL. The paper concludes that a synchronous circuit with a ring oscillator clock shows similar benefits in performance and energy as those of bundled-data asynchronous circuits.Peer ReviewedPostprint (author's final draft

로직 및 피지컬 합성에서의 타이밍 분석과 최적화

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 김태환.Timing analysis is one of the necessary steps in the development of a semiconductor circuit. In addition, it is increasingly important in the advanced process technologies due to various factors, including the increase of process–voltage–temperature variation. This dissertation addresses three problems related to timing analysis and optimization in logic and physical synthesis. Firstly, most static timing analysis today are based on conventional fixed flip-flop timing models, in which every flip-flop is assumed to have a fixed clock-to-Q delay. However, setup and hold skews affect the clock-to-Q delay in reality. In this dissertation, I propose a mathematical formulation to solve the problem and apply it to the clock skew scheduling problems as well as to the analysis of a given circuit, with a scalable speedup technique. Secondly, near-threshold computing is one of the promising concepts for energy-efficient operation of VLSI systems, but wide performance variation and nonlinearity to process variations block the proliferation. To cope with this, I propose a holistic hardware performance monitoring methodology for accurate timing prediction in a near-threshold voltage regime and advanced process technology. Lastly, an asynchronous circuit is one of the alternatives to the conventional synchronous style, and asynchronous pipeline circuit especially attractive because of its small design effort. This dissertation addresses the synthesis problem of lightening two-phase bundled-data asynchronous pipeline controllers, in which delay buffers are essential for guaranteeing the correct handshaking operation but incurs considerable area increase.타이밍 분석은 반도체 회로 개발 필수 과정 중 하나로, 최신 공정일수록 공정-전압-온도 변이 증가를 포함한 다양한 요인으로 하여금 그 중요성이 커지고 있다. 본 논문에서는 로직 및 피지컬 합성과 관련하여 세 가지 타이밍 분석 및 최적화 문제에 대해 다룬다. 첫째로, 오늘날 대부분의 정적 타이밍 분석은 모든 플립-플롭의 클럭-출력 딜레이가 고정된 값이라는 가정을 바탕으로 이루어졌다. 하지만 실제 클럭-출력 딜레이는 해당 플립-플롭의 셋업 및 홀드 스큐에 영향을 받는다. 본 논문에서는 이러한 특성을 수학적으로 정리하였으며, 이를 확장 가능한 속도 향상 기법과 더불어 주어진 회로의 타이밍 분석 및 클럭 스큐 스케쥴링 문제에 적용하였다. 둘째로, 유사 문턱 연산은 초고집적 회로 동작의 에너지 효율을 끌어 올릴 수 있다는 점에서 각광받지만, 큰 폭의 성능 변이 및 비선형성 때문에 널리 활용되고 있지 않다. 이를 해결하기 위해 유사 문턱 전압 영역 및 최신 공정 노드에서 보다 정확한 타이밍 예측을 위한 하드웨어 성능 모니터링 방법론 전반을 제안하였다. 마지막으로, 비동기 회로는 기존 동기 회로의 대안 중 하나로, 그 중에서도 비동기 파이프라인 회로는 비교적 적은 설계 노력만으로도 구현 가능하다는 장점이 있다. 본 논문에서는 2위상 묶음 데이터 프로토콜 기반 비동기 파이프라인 컨트롤러 상에서, 정확한 핸드셰이킹 통신을 위해 삽입된 딜레이 버퍼에 의한 면적 증가를 완화할 수 있는 합성 기법을 제시하였다.1 INTRODUCTION 1 1.1 Flexible Flip-Flop Timing Model 1 1.2 Hardware Performance Monitoring Methodology 4 1.3 Asynchronous Pipeline Controller 10 1.4 Contributions of this Dissertation 15 2 ANALYSIS AND OPTIMIZATION CONSIDERING FLEXIBLE FLIP-FLOP TIMING MODEL 17 2.1 Preliminaries 17 2.1.1 Terminologies 17 2.1.2 Timing Analysis 20 2.1.3 Clock-to-Q Delay Surface Modeling 21 2.2 Clock-to-Q Delay Interval Analysis 22 2.2.1 Derivation 23 2.2.2 Additional Constraints 26 2.2.3 Analysis: Finding Minimum Clock Period 28 2.2.4 Optimization: Clock Skew Scheduling 30 2.2.5 Scalable Speedup Technique 33 2.3 Experimental Results 37 2.3.1 Application to Minimum Clock Period Finding 37 2.3.2 Application to Clock Skew Scheduling 39 2.3.3 Efficacy of Scalable Speedup Technique 43 2.4 Summary 44 3 HARDWARE PERFORMANCE MONITORING METHODOLOGY AT NTC AND ADVANCED TECHNOLOGY NODE 45 3.1 Overall Flow of Proposed HPM Methodology 45 3.2 Prerequisites to HPM Methodology 47 3.2.1 BEOL Process Variation Modeling 47 3.2.2 Surrogate Model Preparation 49 3.3 HPM Methodology: Design Phase 52 3.3.1 HPM2PV Model Construction 52 3.3.2 Optimization of Monitoring Circuits Configuration 54 3.3.3 PV2CPT Model Construction 58 3.4 HPM Methodology: Post-Silicon Phase 60 3.4.1 Transfer Learning in Silicon Characterization Step 60 3.4.2 Procedures in Volume Production Phase 61 3.5 Experimental Results 62 3.5.1 Experimental Setup 62 3.5.2 Exploration of Monitoring Circuits Configuration 64 3.5.3 Effectiveness of Monitoring Circuits Optimization 66 3.5.4 Considering BEOL PVs and Uncertainty Learning 68 3.5.5 Comparison among Different Prediction Flows 69 3.5.6 Effectiveness of Prediction Model Calibration 71 3.6 Summary 73 4 LIGHTENING ASYNCHRONOUS PIPELINE CONTROLLER 75 4.1 Preliminaries and State-of-the-Art Work 75 4.1.1 Bundled-data vs. Dual-rail Asynchronous Circuits 75 4.1.2 Two-phase vs. Four-phase Bundled-data Protocol 76 4.1.3 Conventional State-of-the-Art Pipeline Controller Template 77 4.2 Delay Path Sharing for Lightening Pipeline Controller Template 78 4.2.1 Synthesizing Sharable Delay Paths 78 4.2.2 Validating Logical Correctness for Sharable Delay Paths 80 4.2.3 Reformulating Timing Constraints of Controller Template 81 4.2.4 Minimally Allocating Delay Buffers 87 4.3 In-depth Pipeline Controller Template Synthesis with Delay Path Reusing 88 4.3.1 Synthesizing Delay Path Units 88 4.3.2 Validating Logical Correctness of Delay Path Units 89 4.3.3 Updating Timing Constraints for Delay Path Units 91 4.3.4 In-depth Synthesis Flow Utilizing Delay Path Units 95 4.4 Experimental Results 99 4.4.1 Environment Setup 99 4.4.2 Piecewise Linear Modeling of Delay Path Unit Area 99 4.4.3 Comparison of Power, Performance, and Area 102 4.5 Summary 107 5 CONCLUSION 109 5.1 Chapter 2 109 5.2 Chapter 3 110 5.3 Chapter 4 110 Abstract (In Korean) 127Docto

Design, analysis and implementation of voltage sensor for power-constrained systems

PhD ThesisThanks to an extensive effort by the global research community, the electronic technology has significantly matured over the last decade. This technology has enabled certain operations which humans could not otherwise easily perform. For instance, electronic systems can be used to perform sensing, monitoring and even control operations in environments such as outer space, underground, under the sea or even inside the human body. The main difficulty for electronics operating in these environments is access to a reliable and permanent source of energy. Using batteries as the immediate solution for this problem has helped to provide energy for limited periods of time; however, regular maintenance and replacement are required. Consequently, battery solutions fail wherever replacing them is not possible or operation for long periods is needed. For such cases, researchers have proposed harvesting ambient energy and converting it into an electrical form. An important issue with energy harvesters is that their operation and output power depend critically on the amount of energy they receive and because ambient energy often tends to be sporadic in nature, energy harvesters cannot produce stable or fixed levels of power all of the time. Therefore, electronic devices powered in this way must be capable of adapting their operation to the energy status of the harvester. To achieve this, information on the energy available for use is needed. This can be provided by a sensor capable of measuring voltage. However, stable and fixed voltage and time references are a prerequisite of most traditional voltage measurement devices, but these generally do not exist in energy harvesting environments. A further challenge is that such a sensor also needs to be powered by the energy harvester’s unstable voltage. In this thesis, the design of a reference-free voltage sensor, which can operate with a varying voltage source, is provided based on the capture of a portion of the total energy which is directly related to II the energy being sensed. This energy is then used to power a computation which quantifies captured energy over time, with the information directly generated as digital code. The sensor was fabricated in the 180 nm technology node and successfully tested by performing voltage measurements over the range 1.8 V to 0.8 V

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability

Null convention logic circuits for asynchronous computer architecture

For most of its history, computer architecture has been able to benefit from a rapid scaling in semiconductor technology, resulting in continuous improvements to CPU design. During that period, synchronous logic has dominated because of its inherent ease of design and abundant tools. However, with the scaling of semiconductor processes into deep sub-micron and then to nano-scale dimensions, computer architecture is hitting a number of roadblocks such as high power and increased process variability. Asynchronous techniques can potentially offer many advantages compared to conventional synchronous design, including average case vs. worse case performance, robustness in the face of process and operating point variability and the ready availability of high performance, fine grained pipeline architectures. Of the many alternative approaches to asynchronous design, Null Convention Logic (NCL) has the advantage that its quasi delay-insensitive behavior makes it relatively easy to set up complex circuits without the need for exhaustive timing analysis. This thesis examines the characteristics of an NCL based asynchronous RISC-V CPU and analyses the problems with applying NCL to CPU design. While a number of university and industry groups have previously developed small 8-bit microprocessor architectures using NCL techniques, it is still unclear whether these offer any real advantages over conventional synchronous design. A key objective of this work has been to analyse the impact of larger word widths and more complex architectures on NCL CPU implementations. The research commenced by re-evaluating existing techniques for implementing NCL on programmable devices such as FPGAs. The little work that has been undertaken previously on FPGA implementations of asynchronous logic has been inconclusive and seems to indicate that asynchronous systems cannot be easily implemented in these devices. However, most of this work related to an alternative technique called bundled data, which is not well suited to FPGA implementation because of the difficulty in controlling and matching delays in a 'bundle' of signals. On the other hand, this thesis clearly shows that such applications are not only possible with NCL, but there are some distinct advantages in being able to prototype complex asynchronous systems in a field-programmable technology such as the FPGA. A large part of the value of NCL derives from its architectural level behavior, inherent pipelining, and optimization opportunities such as the merging of register and combina- tional logic functions. In this work, a number of NCL multiplier architectures have been analyzed to reveal the performance trade-offs between various non-pipelined, 1D and 2D organizations. Two-dimensional pipelining can easily be applied to regular architectures such as array multipliers in a way that is both high performance and area-efficient. It was found that the performance of 2D pipelining for small networks such as multipliers is around 260% faster than the equivalent non-pipelined design. However, the design uses 265% more transistors so the methodology is mainly of benefit where performance is strongly favored over area. A pipelined 32bit x 32bit signed Baugh-Wooley multiplier with Wallace-Tree Carry Save Adders (CSA), which is representative of a real design used for CPUs and DSPs, was used to further explore this concept as it is faster and has fewer pipeline stages compared to the normal array multiplier using Ripple-Carry adders (RCA). It was found that 1D pipelining with ripple-carry chains is an efficient implementation option but becomes less so for larger multipliers, due to the completion logic for which the delay time depends largely on the number of bits involved in the completion network. The average-case performance of ripple-carry adders was explored using random input vectors and it was observed that it offers little advantage on the smaller multiplier blocks, but this particular timing characteristic of asynchronous design styles be- comes increasingly more important as word size grows. Finally, this research has resulted in the development of the first 32-Bit asynchronous RISC-V CPU core. Called the Redback RISC, the architecture is a structure of pipeline rings composed of computational oscillations linked with flow completeness relationships. It has been written using NELL, a commercial description/synthesis tool that outputs standard Verilog. The Redback has been analysed and compared to two approximately equivalent industry standard 32-Bit synchronous RISC-V cores (PicoRV32 and Rocket) that are already fabricated and used in industry. While the NCL implementation is larger than both commercial cores it has similar performance and lower power compared to the PicoRV32. The implementation results were also compared against an existing NCL design tool flow (UNCLE), which showed how much the results of these implementation strategies differ. The Redback RISC has achieved similar level of throughput and 43% better power and 34% better energy compared to one of the synchronous cores with the same benchmark test and test condition such as input sup- ply voltage. However, it was shown that area is the biggest drawback for NCL CPU design. The core is roughly 2.5× larger than synchronous designs. On the other hand its area is still 2.9× smaller than previous designs using UNCLE tools. The area penalty is largely due to the unavoidable translation into a dual-rail topology when using the standard NCL cell library

Asynchronous techniques for new generation variation-tolerant FPGA

PhD ThesisThis thesis presents a practical scenario for asynchronous logic implementation that would benefit the modern Field-Programmable Gate Arrays (FPGAs) technology in improving reliability. A method based on Asynchronously-Assisted Logic (AAL) blocks is proposed here in order to provide the right degree of variation tolerance, preserve as much of the traditional FPGAs structure as possible, and make use of asynchrony only when necessary or beneficial for functionality. The newly proposed AAL introduces extra underlying hard-blocks that support asynchronous interaction only when needed and at minimum overhead. This has the potential to avoid the obstacles to the progress of asynchronous designs, particularly in terms of area and power overheads. The proposed approach provides a solution that is complementary to existing variation tolerance techniques such as the late-binding technique, but improves the reliability of the system as well as reducing the design’s margin headroom when implemented on programmable logic devices (PLDs) or FPGAs. The proposed method suggests the deployment of configurable AAL blocks to reinforce only the variation-critical paths (VCPs) with the help of variation maps, rather than re-mapping and re-routing. The layout level results for this method's worst case increase in the CLB’s overall size only of 6.3%. The proposed strategy retains the structure of the global interconnect resources that occupy the lion’s share of the modern FPGA’s soft fabric, and yet permits the dual-rail iv completion-detection (DR-CD) protocol without the need to globally double the interconnect resources. Simulation results of global and interconnect voltage variations demonstrate the robustness of the method

Embedded dynamic programming networks for networks-on-chip

PhD ThesisRelentless technology downscaling and recent technological advancements in three dimensional integrated circuit (3D-IC) provide a promising prospect to realize heterogeneous system-on-chip (SoC) and homogeneous chip multiprocessor (CMP) based on the networks-onchip (NoCs) paradigm with augmented scalability, modularity and performance. In many cases in such systems, scheduling and managing communication resources are the major design and implementation challenges instead of the computing resources. Past research efforts were mainly focused on complex design-time or simple heuristic run-time approaches to deal with the on-chip network resource management with only local or partial information about the network. This could yield poor communication resource utilizations and amortize the benefits of the emerging technologies and design methods. Thus, the provision for efficient run-time resource management in large-scale on-chip systems becomes critical. This thesis proposes a design methodology for a novel run-time resource management infrastructure that can be realized efficiently using a distributed architecture, which closely couples with the distributed NoC infrastructure. The proposed infrastructure exploits the global information and status of the network to optimize and manage the on-chip communication resources at run-time. There are four major contributions in this thesis. First, it presents a novel deadlock detection method that utilizes run-time transitive closure (TC) computation to discover the existence of deadlock-equivalence sets, which imply loops of requests in NoCs. This detection scheme, TC-network, guarantees the discovery of all true-deadlocks without false alarms in contrast to state-of-the-art approximation and heuristic approaches. Second, it investigates the advantages of implementing future on-chip systems using three dimensional (3D) integration and presents the design, fabrication and testing results of a TC-network implemented in a fully stacked three-layer 3D architecture using a through-silicon via (TSV) complementary metal-oxide semiconductor (CMOS) technology. Testing results demonstrate the effectiveness of such a TC-network for deadlock detection with minimal computational delay in a large-scale network. Third, it introduces an adaptive strategy to effectively diffuse heat throughout the three dimensional network-on-chip (3D-NoC) geometry. This strategy employs a dynamic programming technique to select and optimize the direction of data manoeuvre in NoC. It leads to a tool, which is based on the accurate HotSpot thermal model and SystemC cycle accurate model, to simulate the thermal system and evaluate the proposed approach. Fourth, it presents a new dynamic programming-based run-time thermal management (DPRTM) system, including reactive and proactive schemes, to effectively diffuse heat throughout NoC-based CMPs by routing packets through the coolest paths, when the temperature does not exceed chip’s thermal limit. When the thermal limit is exceeded, throttling is employed to mitigate heat in the chip and DPRTM changes its course to avoid throttled paths and to minimize the impact of throttling on chip performance. This thesis enables a new avenue to explore a novel run-time resource management infrastructure for NoCs, in which new methodologies and concepts are proposed to enhance the on-chip networks for future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)