Echo Cancellation : the generalized likelihood ratio test for double-talk vs. channel change

Echo cancellers are required in both electrical (impedance mismatch) and acoustic (speaker-microphone coupling) applications. One of the main design problems is the control logic for adaptation. Basically, the algorithm weights should be frozen in the presence of double-talk and adapt quickly in the absence of double-talk. The optimum likelihood ratio test (LRT) for this problem was studied in a recent paper. The LRT requires a priori knowledge of the background noise and double-talk power levels. Instead, this paper derives a generalized log likelihood ratio test (GLRT) that does not require this knowledge. The probability density function of a sufficient statistic under each hypothesis is obtained and the performance of the test is evaluated as a function of the system parameters. The receiver operating characteristics (ROCs) indicate that it is difficult to correctly decide between double-talk and a channel change, based upon a single look. However, detection based on about 200 successive samples yields a detection probability close to unity (0.99) with a small false alarm probability (0.01) for the theoretical GLRT model. Application of a GLRT-based echo canceller (EC) to real voice data shows comparable performance to that of the LRT-based EC given in a recent paper

Low order harmonic cancellation in a grid connected multiple inverter system via current control parameter randomization

In grid connected multiple inverter systems, it is normal to synchronize the output current of each inverter to the common network voltage. Any current controller deficiencies, which result in low order harmonics, are also synchronized to the common network voltage. As a result the harmonics produced by individual converters show a high degree of correlation and tend to be additive. Each controller can be tuned to achieve a different harmonic profile so that harmonic cancellation can take place in the overall system, thus reducing the net current total harmonic distortion level. However, inter-inverter communication is required. This paper presents experimental results demonstrating an alternative approach, which is to arrange for the tuning within each inverter to be adjusted automatically with a random component. This results in a harmonic output spectrum that varies with time, but is uncorrelated with the harmonic spectrum of any other inverter in the system. The net harmonics from all the inverters undergo a degree of cancellation and the overall system yields a net improvement in power quality

Assessment of Various Density Functionals and Basis Sets for the Calculation of Molecular Anharmonic Force Fields

In a previous contribution (Mol. Phys. {\bf 103}, xxxx, 2005), we established the suitability of density functional theory (DFT) for the calculation of molecular anharmonic force fields. In the present work, we have assessed a wide variety of basis sets and exchange-correlation functionals for harmonic and fundamental frequencies, equilibrium and ground-state rotational constants, and thermodynamic functions beyond the RRHO (rigid rotor-harmonic oscillator) approximation. The fairly good performance of double-zeta plus polarization basis sets for frequencies results from an error compensation between basis set incompleteness and the intrinsic error of exchange-correlation functionals. Triple-zeta plus polarization basis sets are recommended, with an additional high-exponent $d$ function on second-row atoms. All conventional hybrid GGA functionals perform about equally well: high-exchange hybrid GGA and meta-GGA functionals designed for kinetics yield poor results, with the exception of of the very recently developed BMK functional which takes a middle position along with the HCTH/407 (second generation GGA) and TPSS (meta-GGA) functionals. MP2 performs similarly to these functionals but is inferior to hybrid GGAs such as B3LYP and B97-1.Comment: Int. J. Quantum Chem., in press (special issue on vibrational spectroscopies

Echo Cancellation - A Likelihood Ratio Test for Double-talk Versus Channel Change

Echo cancellers are in wide use in both electrical (four wire to two wire mismatch) and acoustic (speaker-microphone coupling) applications. One of the main design problems is the control logic for adaptation. Basically, the algorithm weights should be frozen in the presence of double-talk and adapt quickly in the absence of double-talk. The control logic can be quite complicated since it is often not easy to discriminate between the echo signal and the near-end speaker. This paper derives a log likelihood ratio test (LRT) for deciding between double-talk (freeze weights) and a channel change (adapt quickly) using a stationary Gaussian stochastic input signal model. The probability density function of a sufficient statistic under each hypothesis is obtained and the performance of the test is evaluated as a function of the system parameters. The receiver operating characteristics (ROCs) indicate that it is difficult to correctly decide between double-talk and a channel change based upon a single look. However, post-detection integration of approximately one hundred sufficient statistic samples yields a detection probability close to unity (0.99) with a small false alarm probability (0.01)

Recent progress in applying lattice QCD to kaon physics

Standard lattice calculations in kaon physics are based on the evaluation of matrix elements of local operators between two single-hadron states or a single-hadron state and the vacuum. Recent progress in lattice QCD has gone beyond these standard observables. I will review the status and prospects of lattice kaon physics with an emphasis on non-leptonic $K\to\pi\pi$ decay and long-distance processes including $K^0$-$\overline{K^0}$ mixing and rare kaon decays.Comment: 23 pages, 13 figures, 3 tables; Plenary talk given at Lattice 201

Synthetic LISA: Simulating Time Delay Interferometry in a Model LISA

We report on three numerical experiments on the implementation of Time-Delay Interferometry (TDI) for LISA, performed with Synthetic LISA, a C++/Python package that we developed to simulate the LISA science process at the level of scientific and technical requirements. Specifically, we study the laser-noise residuals left by first-generation TDI when the LISA armlengths have a realistic time dependence; we characterize the armlength-measurements accuracies that are needed to have effective laser-noise cancellation in both first- and second-generation TDI; and we estimate the quantization and telemetry bitdepth needed for the phase measurements. Synthetic LISA generates synthetic time series of the LISA fundamental noises, as filtered through all the TDI observables; it also provides a streamlined module to compute the TDI responses to gravitational waves according to a full model of TDI, including the motion of the LISA array and the temporal and directional dependence of the armlengths. We discuss the theoretical model that underlies the simulation, its implementation, and its use in future investigations on system characterization and data-analysis prototyping for LISA.Comment: 18 pages, 14 EPS figures, REVTeX 4. Accepted PRD version. See http://www.vallis.org/syntheticlisa for information on the Synthetic LISA software packag

Shaped Pupil Lyot Coronagraphs: High-Contrast Solutions for Restricted Focal Planes

Coronagraphs of the apodized pupil and shaped pupil varieties use the Fraunhofer diffraction properties of amplitude masks to create regions of high contrast in the vicinity of a target star. Here we present a hybrid coronagraph architecture in which a binary, hard-edged shaped pupil mask replaces the gray, smooth apodizer of the apodized pupil Lyot coronagraph (APLC). For any contrast and bandwidth goal in this configuration, as long as the prescribed region of contrast is restricted to a finite area in the image, a shaped pupil is the apodizer with the highest transmission. We relate the starlight cancellation mechanism to that of the conventional APLC. We introduce a new class of solutions in which the amplitude profile of the Lyot stop, instead of being fixed as a padded replica of the telescope aperture, is jointly optimized with the apodizer. Finally, we describe shaped pupil Lyot coronagraph (SPLC) designs for the baseline architecture of the Wide-Field Infrared Survey Telescope-Astrophysics Focused Telescope Assets (WFIRST-AFTA) coronagraph. These SPLCs help to enable two scientific objectives of the WFIRST-AFTA mission: (1) broadband spectroscopy to characterize exoplanet atmospheres in reflected starlight and (2) debris disk imaging.Comment: 41 pages, 15 figures; published in the JATIS special section on WFIRST-AFTA coronagraph