SOT-MRAM 300mm integration for low power and ultrafast embedded memories

We demonstrate for the first time full-scale integration of top-pinned perpendicular MTJ on 300 mm wafer using CMOS-compatible processes for spin-orbit torque (SOT)-MRAM architectures. We show that 62 nm devices with a W-based SOT underlayer have very large endurance (> 5x10^10), sub-ns switching time of 210 ps, and operate with power as low as 300 pJ.Comment: presented at VLSI2018 session C8-

Enabling a reliable STT-MRAM main memory simulation

STT-MRAM is a promising new memory technology with very desirable set of properties such as non-volatility, byte-addressability and high endurance. It has the potential to become the universal memory that could be incorporated to all levels of memory hierarchy. Although STT-MRAM technology got significant attention of various major memory manufacturers, to this day, academic research of STT-MRAM main memory remains marginal. This is mainly due to the unavailability of publicly available detailed timing parameters which are required to perform a cycle accurate main memory simulation. Our study presents a detailed analysis of STT-MRAM main memory timing and propose an approach to perform a reliable system level simulation of the memory technology. We seamlessly incorporate STT-MRAM timing parameters into DRAMSim2 memory simulator and use it as a part of the simulation infrastructure of the high-performance computing (HPC) systems. Our results suggests that, STT-MRAM main memory would provide performance comparable to DRAM, while opening up various opportunities for HPC system improvements. Most importantly, our study enables researchers to conduct reliable system level research on STT-MRAM main memory, and to explore the opportunities that this technology has to offer.This work was supported by BSC, Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project and by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272). This work has also received funding from the European Union's Horizon 2020 research and innovation programme under ExaNoDe project (grant agreement No 671578). The authors wish to thank Terry Hulett, Duncan Bennett and Ben Cooke from Everspin Technologies Inc., for their technical support.Peer ReviewedPostprint (author's final draft

High-Performance Energy-Efficient and Reliable Design of Spin-Transfer Torque Magnetic Memory

In this dissertation new computing paradigms, architectures and design philosophy are proposed and evaluated for adopting the STT-MRAM technology as highly reliable, energy efficient and fast memory. For this purpose, a novel cross-layer framework from the cell-level all the way up to the system- and application-level has been developed. In these framework, the reliability issues are modeled accurately with appropriate fault models at different abstraction levels in order to analyze the overall failure rates of the entire memory and its Mean Time To Failure (MTTF) along with considering the temperature and process variation effects. Design-time, compile-time and run-time solutions have been provided to address the challenges associated with STT-MRAM. The effectiveness of the proposed solutions is demonstrated in extensive experiments that show significant improvements in comparison to state-of-the-art solutions, i.e. lower-power, higher-performance and more reliable STT-MRAM design

Ultrafast and low-energy switching in voltage-controlled elliptical pMTJ

Switching magnetization in a perpendicular magnetic tunnel junction (pMTJ) via voltage controlled magnetic anisotropy (VCMA) has shown the potential to markedly reduce the switching energy. However, the requirement of an external magnetic field poses a critical bottleneck for its practical applications. In this work, we propose an elliptical-shaped pMTJ to eliminate the requirement of providing an external field by an additional circuit. We demonstrate that a 10 nm thick in-plane magnetized bias layer (BL) separated by a metallic spacer of 3 nm from the free layer (FL) can be engineered within the MTJ stack to provide the 50 mT bias magnetic field for switching. By conducting macrospin simulation, we find that a fast switching in 0.38 ns with energy consumption as low as 0.3 fJ at a voltage of 1.6 V can be achieved. Furthermore, we study the phase diagram of switching probability, showing that a pulse duration margin of 0.15 ns is obtained and a low-voltage operation (~ 1 V) is favored. Finally, the MTJ scalability is considered, and it is found that scaling-down may not be appealing in terms of both the energy consumption and the switching time for the precession based VCMA switching.Comment: There are 28 pages and 5 figure

Performance impact of a slower main memory: a case study of STT-MRAM in HPC

In high-performance computing (HPC), significant effort is invested in research and development of novel memory technologies. One of them is Spin Transfer Torque Magnetic Random Access Memory (STT-MRAM) --- byte-addressable, high-endurance non-volatile memory with slightly higher access time than DRAM. In this study, we conduct a preliminary assessment of HPC system performance impact with STT-MRAM main memory with recent industry estimations. Reliable timing parameters of STT-MRAM devices are unavailable, so we also perform a sensitivity analysis that correlates overall system slowdown trend with respect to average device latency. Our results demonstrate that the overall system performance of large HPC clusters is not particularly sensitive to main-memory latency. Therefore, STT-MRAM, as well as any other emerging non-volatile memories with comparable density and access time, can be a viable option for future HPC memory system design.This work was supported by the Collaboration Agreement between Samsung Electronics Co., Ltd. and BSC, Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project and by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272). This work has also received funding from the European Union's Horizon 2020 research and innovation programme under ExaNoDe project (grant agreement No 671578).Peer ReviewedPostprint (author's final draft

Exploring Spin-transfer-torque devices and memristors for logic and memory applications

As scaling CMOS devices is approaching its physical limits, researchers have begun exploring newer devices and architectures to replace CMOS. Due to their non-volatility and high density, Spin Transfer Torque (STT) devices are among the most prominent candidates for logic and memory applications. In this research, we first considered a new logic style called All Spin Logic (ASL). Despite its advantages, ASL consumes a large amount of static power; thus, several optimizations can be performed to address this issue. We developed a systematic methodology to perform the optimizations to ensure stable operation of ASL. Second, we investigated reliable design of STT-MRAM bit-cells and addressed the conflicting read and write requirements, which results in overdesign of the bit-cells. Further, a Device/Circuit/Architecture co-design framework was developed to optimize the STT-MRAM devices by exploring the design space through jointly considering yield enhancement techniques at different levels of abstraction. Recent advancements in the development of memristive devices have opened new opportunities for hardware implementation of non-Boolean computing. To this end, the suitability of memristive devices for swarm intelligence algorithms has enabled researchers to solve a maze in hardware. In this research, we utilized swarm intelligence of memristive networks to perform image edge detection. First, we proposed a hardware-friendly algorithm for image edge detection based on ant colony. Next, we designed the image edge detection algorithm using memristive networks