162 research outputs found

    Fast Decoder for Overloaded Uniquely Decodable Synchronous Optical CDMA

    Full text link
    In this paper, we propose a fast decoder algorithm for uniquely decodable (errorless) code sets for overloaded synchronous optical code-division multiple-access (O-CDMA) systems. The proposed decoder is designed in a such a way that the users can uniquely recover the information bits with a very simple decoder, which uses only a few comparisons. Compared to maximum-likelihood (ML) decoder, which has a high computational complexity for even moderate code lengths, the proposed decoder has much lower computational complexity. Simulation results in terms of bit error rate (BER) demonstrate that the performance of the proposed decoder for a given BER requires only 1-2 dB higher signal-to-noise ratio (SNR) than the ML decoder.Comment: arXiv admin note: substantial text overlap with arXiv:1806.0395

    On high-efficiency optical communication and key distribution

    Get PDF
    We investigate modulation and coding techniques that approach the fundamental limits of communication and key distribution over optical channels, in the regime of simultaneously high photon and bandwidth efficiencies. First, we develop a simple and robust system design for free-space optical communication that incorporates pulse-position modulation (PPM) over multiple spatial degrees of freedom in order to achieve high photon and spectral efficiency. Further, in the context of key distribution, we determine the optimal rate using a Poisson source of entangled photon pairs and photon detectors, and show how to approach it using PPM parsing of the detected photon stream.United States. Defense Advanced Research Projects Agency. Information in a Photon Program (Contract HR0011-10-C-0159)United States. Army Research Office (Grant W911NF- 10-1-0416)United States. Air Force Office of Scientific Research (Grant FA9550-11-1-0183

    Opportunistic communications in large uncoordinated networks

    Get PDF
    (English) The increase of wireless devices offering high data rate services limits the coexistence of wireless systems sharing the same resources in a given geographical area because of inter-system interference. Therefore, interference management plays a key role in permitting the coexistence of several heterogeneous communication services. However, classical interference management strategies require lateral information giving rise to the need for inter-system coordination and cooperation, which is not always practical. Opportunistic communications offer a potential solution to the problem of inter-system interference management. The basic principle of opportunistic communications is to efficiently and robustly exploit the resources available in a wireless network and adapt the transmitted signals to the state of the network to avoid inter-system interference. Therefore, opportunistic communications depend on inferring the available network resources that can be safely exploited without inducing interference in coexisting communication nodes. Once the available network resources are identified, the most prominent opportunistic communication techniques consist in designing scenario-adapted precoding/decoding strategies to exploit the so-called null space. Despite this, classical solutions in the literature suffer from two main drawbacks: the lack of robustness to detection errors and the need for intra-system cooperation. This thesis focuses on the design of a null space-based opportunistic communication scheme that addresses the drawbacks exhibited by existing methodologies under the assumption that opportunistic nodes do not cooperate. For this purpose, a generalized detection error model independent of the null-space identification mechanism is introduced that allows the design of solutions that exhibit minimal inter-system interference in the worst case. These solutions respond to a maximum signal-to-interference ratio (SIR) criterion, which is optimal under non-cooperative conditions. The proposed methodology allows the design of a family of orthonormal waveforms that perform a spreading of the modulated symbols within the detected null space, which is key to minimizing the induced interference density. The proposed solutions are invariant within the inferred null space, allowing the removal of the feedback link without giving up coherent waveform detection. In the absence of coordination, the waveform design relies solely on locally sensed network state information, inducing a mismatch between the null spaces identified by the transmitter and receiver that may worsen system performance. Although the proposed solution is robust to this mismatch, the design of enhanced receivers using active subspace detection schemes is also studied. When the total number of network resources increases arbitrarily, the proposed solutions tend to be linear combinations of complex exponentials, providing an interpretation in the frequency domain. This asymptotic behavior allows us to adapt the proposed solution to frequency-selective channels by means of a cyclic prefix and to study an efficient modulation similar to the time division multiplexing scheme but using circulant waveforms. Finally, the impact of the use of multiple antennas in opportunistic null space-based communications is studied. The performed analysis reveals that, in any case, the structure of the antenna clusters affects the opportunistic communication, since the proposed waveform mimics the behavior of a single-antenna transmitter. On the other hand, the number of sensors employed translates into an improvement in terms of SIR.(Català) El creixement incremental dels dispositius sense fils que requereixen serveis d'alta velocitat de dades limita la coexistència de sistemes sense fils que comparteixen els mateixos recursos en una àrea geogràfica donada a causa de la interferència entre sistemes. Conseqüentment, la gestió d'interferència juga un paper fonamental per a facilitar la coexistència de diversos serveis de comunicació heterogenis. No obstant això, les estratègies clàssiques de gestió d'interferència requereixen informació lateral originant la necessitat de coordinació i cooperació entre sistemes, que no sempre és pràctica. Les comunicacions oportunistes ofereixen una solució potencial al problema de la gestió de les interferències entre sistemes. El principi bàsic de les comunicacions oportunistes és explotar de manera eficient i robusta els recursos disponibles en una xarxa sense fils i adaptar els senyals transmesos a l'estat de la xarxa per evitar interferències entre sistemes. Per tant, les comunicacions oportunistes depenen de la inferència dels recursos de xarxa disponibles que poden ser explotats de manera segura sense induir interferència en els nodes de comunicació coexistents. Una vegada que s'han identificat els recursos de xarxa disponibles, les tècniques de comunicació oportunistes més prominents consisteixen en el disseny d'estratègies de precodificació/descodificació adaptades a l'escenari per explotar l'anomenat espai nul. Malgrat això, les solucions clàssiques en la literatura sofreixen dos inconvenients principals: la falta de robustesa als errors de detecció i la necessitat de cooperació intra-sistema. Aquesta tesi tracta el disseny d'un esquema de comunicació oportunista basat en l'espai nul que afronta els inconvenients exposats per les metodologies existents assumint que els nodes oportunistes no cooperen. Per a aquest propòsit, s'introdueix un model generalitzat d'error de detecció independent del mecanisme d'identificació de l'espai nul que permet el disseny de solucions que exhibeixen interferències mínimes entre sistemes en el cas pitjor. Aquestes solucions responen a un criteri de màxima relació de senyal a interferència (SIR), que és òptim en condicions de no cooperació. La metodologia proposada permet dissenyar una família de formes d'ona ortonormals que realitzen un spreading dels símbols modulats dins de l'espai nul detectat, que és clau per minimitzar la densitat d’interferència induïda. Les solucions proposades són invariants dins de l'espai nul inferit, permetent suprimir l'enllaç de retroalimentació i, tot i així, realitzar una detecció coherent de forma d'ona. Sota l’absència de coordinació, el disseny de la forma d'ona es basa únicament en la informació de l'estat de la xarxa detectada localment, induint un desajust entre els espais nuls identificats pel transmissor i receptor que pot empitjorar el rendiment del sistema. Tot i que la solució proposada és robusta a aquest desajust, també s'estudia el disseny de receptors millorats fent ús de tècniques de detecció de subespai actiu. Quan el nombre total de recursos de xarxa augmenta arbitràriament, les solucions proposades tendeixen a ser combinacions lineals d'exponencials complexes, proporcionant una interpretació en el domini freqüencial. Aquest comportament asimptòtic permet adaptar la solució proposada a entorns selectius en freqüència fent ús d'un prefix cíclic i estudiar una modulació eficient derivada de l'esquema de multiplexat per divisió de temps emprant formes d'ona circulant. Finalment, s’estudia l'impacte de l'ús de múltiples antenes en comunicacions oportunistes basades en l'espai nul. L'anàlisi realitzada permet concloure que, en cap cas, l'estructura de les agrupacions d'antenes tenen un impacte sobre la comunicació oportunista, ja que la forma d'ona proposada imita el comportament d'un transmissor mono-antena. D'altra banda, el nombre de sensors emprat es tradueix en una millora en termes de SIR.(Español) El incremento de los dispositivos inalámbricos que ofrecen servicios de alta velocidad de datos limita la coexistencia de sistemas inalámbricos que comparten los mismos recursos en un área geográfica dada a causa de la interferencia inter-sistema. Por tanto, la gestión de interferencia juega un papel fundamental para facilitar la coexistencia de varios servicios de comunicación heterogéneos. Sin embargo, las estrategias clásicas de gestión de interferencia requieren información lateral originando la necesidad de coordinación y cooperación entre sistemas, que no siempre es práctica. Las comunicaciones oportunistas ofrecen una solución potencial al problema de la gestión de las interferencias entre sistemas. El principio básico de las comunicaciones oportunistas es explotar de manera eficiente y robusta los recursos disponibles en una red inalámbricas y adaptar las señales transmitidas al estado de la red para evitar interferencias entre sistemas. Por lo tanto, las comunicaciones oportunistas dependen de la inferencia de los recursos de red disponibles que pueden ser explotados de manera segura sin inducir interferencia en los nodos de comunicación coexistentes. Una vez identificados los recursos disponibles, las técnicas de comunicación oportunistas más prominentes consisten en el diseño de estrategias de precodificación/descodificación adaptadas al escenario para explotar el llamado espacio nulo. A pesar de esto, las soluciones clásicas en la literatura sufren dos inconvenientes principales: la falta de robustez a los errores de detección y la necesidad de cooperación intra-sistema. Esta tesis propone diseñar un esquema de comunicación oportunista basado en el espacio nulo que afronta los inconvenientes expuestos por las metodologías existentes asumiendo que los nodos oportunistas no cooperan. Para este propósito, se introduce un modelo generalizado de error de detección independiente del mecanismo de identificación del espacio nulo que permite el diseño de soluciones que exhiben interferencias mínimas entre sistemas en el caso peor. Estas soluciones responden a un criterio de máxima relación de señal a interferencia (SIR), que es óptimo en condiciones de no cooperación. La metodología propuesta permite diseñar una familia de formas de onda ortonormales que realizan un spreading de los símbolos modulados dentro del espacio nulo detectado, que es clave para minimizar la densidad de interferencia inducida. Las soluciones propuestas son invariantes dentro del espacio nulo inferido, permitiendo suprimir el enlace de retroalimentación sin renunciar a la detección coherente de forma de onda. En ausencia de coordinación, el diseño de la forma de onda se basa únicamente en la información del estado de la red detectada localmente, induciendo un desajuste entre los espacios nulos identificados por el transmisor y receptor que puede empeorar el rendimiento del sistema. A pesar de que la solución propuesta es robusta a este desajuste, también se estudia el diseño de receptores mejorados usando técnicas de detección de subespacio activo. Cuando el número total de recursos de red aumenta arbitrariamente, las soluciones propuestas tienden a ser combinaciones lineales de exponenciales complejas, proporcionando una interpretación en el dominio frecuencial. Este comportamiento asintótico permite adaptar la solución propuesta a canales selectivos en frecuencia mediante un prefijo cíclico y estudiar una modulación eficiente derivada del esquema de multiplexado por división de tiempo empleando formas de onda circulante. Finalmente, se estudia el impacto del uso de múltiples antenas en comunicaciones oportunistas basadas en el espacio nulo. El análisis realizado revela que la estructura de las agrupaciones de antenas no afecta la comunicación oportunista, ya que la forma de onda propuesta imita el comportamiento de un transmisor mono-antena. Por otro lado, el número de sensores empleado se traduce en una mejora en términos de SIR.Postprint (published version

    Viterbi algorithm in continuous-phase frequency shift keying

    Get PDF
    The Viterbi algorithm, an application of dynamic programming, is widely used for estimation and detection problems in digital communications and signal processing. It is used to detect signals in communication channels with memory, and to decode sequential error-control codes that are used to enhance the performance of digital communication systems. The Viterbi algorithm is also used in speech and character recognition tasks where the speech signals or characters are modeled by hidden Markov models. This project explains the basics of the Viterbi algorithm as applied to systems in digital communication systems, and speech and character recognition. It also focuses on the operations and the practical memory requirements to implement the Viterbi algorithm in real-time. A forward error correction technique known as convolutional coding with Viterbi decoding was explored. In this project, the basic Viterbi decoder behavior model was built and simulated. The convolutional encoder, BPSK and AWGN channel were implemented in MATLAB code. The BER was tested to evaluate the decoding performance. The theory of Viterbi Algorithm is introduced based on convolutional coding. The application of Viterbi Algorithm in the Continuous-Phase Frequency Shift Keying (CPFSK) is presented. Analysis for the performance is made and compared with the conventional coherent estimator. The main issue of this thesis is to implement the RTL level model of Viterbi decoder. The RTL Viterbi decoder model includes the Branch Metric block, the Add-Compare-Select block, the trace-back block, the decoding block and next state block. With all done, we further understand about the Viterbi decoding algorithm

    Doppler Shift Tolerance of Typical Pseudorandom Binary Sequences in PMCW Radar

    Get PDF
    In the context of all-digital radar systems, phase-modulated continuous wave (PMCW) based on pseudorandom binary sequences (PRBSs) appears to be a prominent candidate modulation scheme for applications such as autonomous driving. Among the reasons for its candidacy are its simplified transmitter architecture and lower linearity requirements (e.g., compared to orthogonal-frequency division multiplexing radars), as well as its high velocity unambiguity and multiple-input multiple-output operation capability, all of which are characteristic of digital radars. For appropriate operation of a PMCW radar, choosing a PRBS whose periodic autocorrelation function (PACF) has low sidelobes and high robustness to Doppler shifts is paramount. In this sense, this article performs an analysis of Doppler shift tolerance of the PACFs of typically adopted PRBSs in PMCW radar systems supported by simulation and measurement results. To accurately measure the Doppler-shift-induced degradation of PACFs, peak power loss ratio (PPLR), peak sidelobe level ratio (PSLR), and integrated-sidelobe level ratio (ISLR) were used as metrics. Furthermore, to account for effects on targets whose ranges are not multiples of the range resolution, oversampled PACFs are analyzed

    OFDM-IDMA for Uplink Transmission in Passive Optical Networks

    Full text link
    In this paper, we propose the orthogonal frequency-division multiplexing-interleaved division multiplexing access (OFDM-IDMA) technique for passive optical networks (PONs). We evaluate the performance of such systems and compare it with the already proposed OFDM-Access (OFDMA) technique by means of the bit error rate versus received power for two different coding schemes and different number of iterations. Results show that OFDM-IDMA technique with an unequal power allocation distribution among the different optical network units (ONUs) offers similar performance to OFDMA when used with a simple convolutional code at an aggregated rate of 4 and 8 Gbits/s. Dynamic bandwidth allocation can be easily implemented with this technique. © 2011 IEEE.Sánchez Costa, C.; Ortega Tamarit, B.; Capmany Francoy, J. (2012). OFDM-IDMA for Uplink Transmission in Passive Optical Networks. IEEE Photonics Journal. 4(1):1-13. doi:10.1109/JPHOT.2011.2177450S1134

    IF-level signal-processing of GPS and Galileo Radionavigation signals using MATLAB/Simulink®: Including Effects of Interference and Multipath

    Get PDF
    Open-source GNSS simulator models are rare and somewhat difficult to find. Therefore, Laboratory of Electronics and Communications Engineering in the former Tampere University of Technology (and now Tampere University, Hervanta Campus) has took it upon itself to develop, from time to time, a free and open-source simulator model based on MATLAB/Simulink® for signal processing of a carefully selected set of GNSS radionavigation signals, namely, Galileo E1, Galileo E5, GPS L1, and GPS L5. This M.Sc. thesis is the culmination of those years which have been spent intermittently on research and development of that simulator model. The first half of this M.Sc. thesis is a literature review of some topics which are believed to be of relevance to the thesis’s second half which is in turn more closely associated with documenting the simulator model in question. In particular, the literature review part presents the reader with a plethora of GNSS topics ranging from history of GNSS technology to characteristics of existing radionavigation signals and, last but not least, compatibility and interoperability issues among existing GNSS constellations. While referring to the GNSS theory whenever necessary, the second half is, however, mainly focused on describing the inner-workings of the simulator model from the standpoint of software implementations. Finally, the second half, and thereby the thesis, is concluded with a presentation of various statistical results concerning signal acquisition’s probabilities of detection and false-alarm, in addition to signal tracking’s RMSE

    Multiuser non coherent massive MIMO schemes based on DPSK for future communication systems

    Get PDF
    The explosive usage of rich multimedia content in wireless devices has overloaded the communication networks. Moreover, the fifth generation (5G) of wireless communications involves new requirements in the radio access network (RAN) which require higher network capacities and new capabilities such as ultra-reliable and low-latency communication (URLLC), vehicular communications or augmented reality. All this has encouraged a remarkable spectrum crisis in the RF bands. A need for searching alternative techniques with more spectral efficiency to accommodate the needs of future emerging wireless communications is emerging. In this context, massive MIMO (m-MIMO) systems have been proposed as a promising solution for providing a substantial increase in the network capacity, becoming one of the key enabling technologies for 5G and beyond. m-MIMO provides high spectral- and energy-efficiency thanks to the deployment of a large number of antennas at the BS. However, we have to take into account that the current communication technologies are based on coherent transmission techniques so far, which require the transmission of a huge amount of signaling. This drawback is escalating with the excessive available number of antennas in m-MIMO. Therefore, the differential encoding and non coherent (NC) detection are an alternative solution to circumvent the drawbacks of m-MIMO in coherent systems. This Ph.D. Thesis is focused on signal processing techniques for NC detection in conjunction with m-MIMO, proposing new constellation designs and NC detection algorithms, where the information is transmitted in the signal differential phase. First, we design new constellation schemes for an uplink multiuser NC m-MIMO system in Rayleigh fading channels. These designs allow us to separate the users' signals at the receiver thanks to a one-to-one correspondence between the constellation for each user and the received joint constellation. Two approaches are considered in terms of BER: each user achieves a different performance and, on the other hand, the same performance is provided for all users. We analyze the number of antennas needed for those designs and compare to the required number by other designs in the literature. It is shown that our designs based on DPSK require a lower number of antennas than that required by their counterpart schemes based on energy. In addition, we compare the performance to their coherent counterpart systems, resulting NC-m-MIMO based on DPSK capable of outperforming the coherent systems with the suitable designs. Second, in order to reduce the number of antennas required for a target performance we propose a multi-user bit interleaved coded modulation - iterative decoding (BICM-ID) scheme as channel coding for a NC-m-MIMO system based on DPSK. We propose a novel NC approach for calculating EXIT curves based on the number of antennas. Then using the EXIT chart we find the best channel coding scheme for our NC-m-MIMO proposal. We show that the number of users served by the BS can be increased with a 70% reduction in the number of antennas with respect to the case without channel coding. In particular, we show that with 100 antennas for error protection equal design for all users and a coding rate of 1/2 we achieve the minimum probability of error. Third, we consider that current scenarios such as backhaul wireless systems, rural or suburban environments, and even new device-to-device (D2D) communications or the communications in higher frequencies (millimeter and the emerging ones in terahertz frequencies) can have a predominant line-of-sight (LOS) component, modeled by Rician fading. For all these new possible scenarios in 5G, we analyze the behavior of the NC m-MIMO systems when we have a Rician fading. We present a new constellation design to overcome the problem of the LOS channel component, as well as an associated detection algorithm to separate each user in reception taking into account the characterization of the constellation. In addition, for contemplating a more realistic scenario, we propose grouping users which experience a Rayleigh fading with those with Rician fading, analyzing the SINR and the performance of such combination in a multi-user NC m-MIMO system based on M-DPSK. The adequate user grouping allows unifying the constellation for both groups of users and the detection algorithm, reducing the complexity of the receiver. Also, the number of users that may be multiplexed may be further increased thanks to the improved performance. In the fourth part of this Thesis, we analyse the performance of multi-user NC m- MIMO based on DPSK in real environments and practical channels defined for the current standards such as LTE, the future technologies such as 5G and even for communications in the terahertz band. For this purpose, we use a metric to model the time-varying characteristics of the practical channels. We employ again the EXIT charts tool for analyzing and designing iteratively decoded systems. This analysis allows us to obtain an estimate of the degradation of the system's performance imposed by realistic channels. Hence, we show that our proposed system is robust to temporal variations, thus it is more recommendable the employment of NC-m-MIMO-DPSK in the future communication standards such as 5G. In order to reduce he number of hardware resources required in terms of RF chains, facilitating its implementation in a real system, we propose incorporating differential spatial modulation (DSM). We present and analyze a novel multiuser scheme for NC-m-MIMO combined with DSM with which we can see that the number of antennas is not a affected by the incorporation of DSM, even we have an improvement on the performance with respect to the coherent case. Finally, we study the viability of multiplexing users by constellation schemes against classical multiplexing techniques such as time division multiple access (TDMA). In order to fully characterize the system performance we analyze the block error rate (BLER) and the throughput of a NC-m-MIMO system. The results show a significant advantage regarding the number of antennas for multiplexing in the constellation against TDMA. However, in some cases, the demodulation of multiple users in constellation could require an excessively large number of antennas compared to TDMA. Therefore, it is necessary to properly manage the tradeoff between throughout and the number of antennas, to reach an optimal operational point, as shown in this Thesis.El inmenso uso de contenido multimedia en los dispositivos inalámbricos ha sobrecargado las redes de comunicaciones. Además, la quinta generación (5G) de sistemas de comunicaciones demanda nuevos requisitos para la red de acceso radio, la cual requiere ofrecer capacidades de red mayores y nuevas funcionalidades como comunicaciones ultra fiables y con muy poca letancia (URLLC), comunicaciones vehiculares o aplicaciones como la realidad aumentada. Todo esto ha propiciado una crisis notable en el espectro electromagnético, lo que ha llevado a una necesidad por buscar técnicas alternativas con más eficiencia espectral para acomodar todos los requisitos de las tecnologías de comunicaciones emergentes y futuras. En este contexto, los sistemas multi antena masivos, conocidos como massive MIMO, m-MIMO, han sido propuestos como una solución prometedora que proporciona un incremento substancial de la capacidad de red, convirtiéndose en una de las tecnologías claves para el 5G. Los sistemas m-MIMO elevan enormemente el número de antenas en la estación base, lo que les permite ofrecer alta eficiencia espectral y energética. No obstante, tenemos que tener en cuenta que las actuales tecnologías de comunicaciones emplean técnicas coherentes, las cuales requieren de información del estado del canal y por ello la transmisión de una enorme cantidad de información de señalización. Este inconveniente se ve agravado en el caso del m-MIMO debido al enorme número de antenas. Por ello, la codificación diferencial y la detección no coherente (NC) son una solución alternativa para solventar el problema de m-MIMO en los sistemas coherentes. Esta Tesis se centra en las técnicas de procesado de señal para detección NC junto con m-MIMO, proponiendo nuevos esquemas de constelación y algoritmos de detección NC, donde la información sea transmitida en la diferencia de fase de la señal. Primero, diseñamos nuevas constelaciones para un sistema multi usuario NC en m- MIMO en enlace ascendente (uplink) en canales con desvanecimiento tipo Rayleigh. Estos diseños nos permiten separar las señales de los usuarios en el receptor gracias a la correspondencia unívoca entre la constelación de cada usuario individual y la constelación conjunta recibida en la estación base. Hemos considerado dos enfoques para el diseño en términos de probabilidad de error: cada usuario consigue un rendimiento distinto, mientras que por otro lado, todos los usuarios son capaces de recibir las mismas prestaciones de probabilidad de error. Analizamos el número de antenas necesario para estos diseños y comparamos con el número requerido por otros diseños propuestos en la literatura. Nuestro diseño basado en DPSK requiere un número menor de antenas comparado con los sistemas basados en detección de energía. También comparamos con su homólogo coherente, resultando que NC-m-MIMO basado en DPSK es capaz de superar a los sistemas coherentes con los diseños adecuados. En segundo lugar, para reducir el número de antenas requerido para un rendimiento dado, proponemos incluir un esquema de codificación de canal. Hemos optado por un esquema de modulación codificado por bit entrelazado y decodificación iterativa (BICMID). Hemos empleado la herramienta EXIT chart para el diseño de la codificación de canal, proponiendo un nuevo enfoque para calcular las curvas EXIT de forma NC y basadas en el número de antenas. Los resultados muestran que el número de usuarios servidos por la estación base puede ser incrementado reduciendo un 70% el número de antenas con respecto al caso sin codificación de canal. En particular, para un array de 100 antenas y un diseño que ofrezca iguales prestaciones a todos los usuarios, con un código de tasa 1=2, podemos conseguir la mínima probabilidad de error. En tercer lugar, consideramos escenarios donde el canal tenga una componente predominante de visión directa (LOS) con la estación base modelada mediante un desvanecimiento tipo Rician. Por ejemplo, sistemas inalámbricos de backhaul, entornos rurales o sub urbanos, comunicaciones entre dispositivos (D2D), también cuando nos movemos hacia frecuencias superiores como son en la banda de milimétricas o más recientemente, la banda de terahercios para buscar mayores anchos de banda. Todos estos escenarios están contemplados en el futuro 5G. Los diseños presentados para canales Rayleigh ya no son válidos debido a la componente LOS del canal, por ello presentamos un nuevo diseño de constelación que resuelve el problema de la componente LOS, así como una guía para diseñar nuevas constelaciones. También proponemos un algoritmo asociado al diseñno de la constelación para poder separar a los usuarios en recepción. Además, para contemplar un escenario más realista donde podamos encontrar tanto desvanecimiento Rayleigh como Rice, proponemos agrupar usuarios de ambos grupos, analizando su rendimiento y relación señal a interferencia en la combinación. El adecuado agrupamiento permite unificar el diseño de la constelación para ambos desvanecimientos y por tanto reducir la complejidad en el receptor. También, el número de usuarios multiplicados en la constelación podría ser incrementado, gracias a la mejora en el rendimiento. El cuarto módulo de esta tesis es dedicado a analizar el rendimiento de los diseños propuestos en presencia de canales reales, donde disponemos de variabilidad temporal y en frecuencia. Proponemos usar una métrica que modela las características de la variabilidad temporal y, usando de nuevo la herramienta EXIT, analizamos los sistemas decodificados iterativamente considerando ahora los parámetros prácticos del canal. Este análisis nos permite obtener una estimación de la degradación que sufre el rendimiento del sistema impuesto por canales reales. Los resultados muestran que los sistemas NC-m-MIMO basados en DPSK son muy robustos a la variabilidad temporal por lo que son recomendables para los nuevos escenarios propuestos por el 5G, donde el canal cambia rápidamente. Otra consideración para introducir los sistemas NC con m-MIMO es la problemática de necesitar muchas cadenas de radio frecuencia que llevarían a tamaños de dispositivos enormes. Para reducir este número se propone la modulación espacial. En esta Tesis, estudiamos su uso con los sistemas NC, proponiendo una solución de modulación espacial diferencial para esquemas con múltiples usuarios combinado con NC-m-MIMO. Finalmente, estudiamos la viabilidad de multiplexar usuarios en la constelación frente a usar técnicas clásicas de multiplexación como TDMA. Para caracterizar completamente el rendimiento del sistema, analizamos la tasa de error de bloque (BLER) y el throughput de un sistema NC-m-MIMO. Los resultados muestran una ventaja significativa en cuanto al número de antennas para multiplexar usuarios en la constelación frente al requerido por TDMA. No obstante, en algunos casos, la demodulación de múltiples usuarios en la constelación podría requerir un número de antennas excesivamente grande comparado con la multiplexación en el tiempo. Por ello, es necesario gestionar adecuadamente un balance entre el throughput y el número de antenas para alcanzar un punto operacional óptimo, como se muestra en esta Tesis.Programa Oficial de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidente: Ana Isabel Pérez Neira.- Secretario: Máximo Morales Céspedes.- Vocal: María del Carmen Aguayo Torre
    corecore