A PUF based Lightweight Hardware Security Architecture for IoT

With an increasing number of hand-held electronics, gadgets, and other smart devices, data is present in a large number of platforms, thereby increasing the risk of security, privacy, and safety breach than ever before. Due to the extreme lightweight nature of these devices, commonly referred to as IoT or `Internet of Things\u27, providing any kind of security is prohibitive due to high overhead associated with any traditional and mathematically robust cryptographic techniques. Therefore, researchers have searched for alternative intuitive solutions for such devices. Hardware security, unlike traditional cryptography, can provide unique device-specific security solutions with little overhead, address vulnerability in hardware and, therefore, are attractive in this domain. As Moore\u27s law is almost at its end, different emerging devices are being explored more by researchers as they present opportunities to build better application-specific devices along with their challenges compared to CMOS technology. In this work, we have proposed emerging nanotechnology-based hardware security as a security solution for resource constrained IoT domain. Specifically, we have built two hardware security primitives i.e. physical unclonable function (PUF) and true random number generator (TRNG) and used these components as part of a security protocol proposed in this work as well. Both PUF and TRNG are built from metal-oxide memristors, an emerging nanoscale device and are generally lightweight compared to their CMOS counterparts in terms of area, power, and delay. Design challenges associated with designing these hardware security primitives and with memristive devices are properly addressed. Finally, a complete security protocol is proposed where all of these different pieces come together to provide a practical, robust, and device-specific security for resource-limited IoT systems

Novel High Performance Ultra Low Power Static Random Access Memories (SRAMs) Based on Next Generation Technologies

Title from PDF of title page viewed January 27, 2021Dissertation advisor: Masud H. ChowdhuryVitaIncludes bibliographical references (page 107-120)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019Next Big Thing Is Surely Small: Nanotechnology Can Bring Revolution. Nanotechnology leads the world towards many new applications in various fields of computing, communication, defense, entertainment, medical, renewable energy and environment. These nanotechnology applications require an energy-efficient memory system to compute and process. Among all the memories, Static Random Access Memories (SRAMs) are high performance memories and occupies more than 50% of any design area. Therefore, it is critical to design high performance and energy-efficient SRAM design. Ultra low power and high speed applications require a new generation memory capable of operating at low power as well as low execution time. In this thesis, a novel 8T SRAM design is proposed that offers significantly faster access time and lowers energy consumption along with better read stability and write ability. The proposed design can be used in the conventional SRAM as well as in computationally intensive applications like neural networks and machine learning classifiers [1]-[4]. Novel 8T SRAM design offers higher energy efficiency, reliability, robustness and performance compared to the standard 6T and other existing 8T and 9T designs. It offers the advantages of a 10T SRAM without the additional area, delay and power overheads of the 10T SRAM. The proposed 8T SRAM would be able to overcome many other limitations of the conventional 6T and other 7T, 8T and 9T designs. The design employs single bitline for the write operation, therefore the number of write drivers are reduced. The defining feature of the proposed 8T SRAM is its hybrid design, which is the combination of two techniques: (i) the utilization of single-ended bitline and (ii) the utilization of virtual ground. The single-ended bitline technique ensures separate read and write operations, which eventually reduces the delay and power consumption during the read and write operations. It's independent read and write paths allow the use of the minimum sized access transistors and aid in a disturb-free read operation. The virtual ground weakens the positive feedback in the SRAM cell and improves its write ability. The virtual ground technique is also used to reduce leakages. The proposed design does not require precharging the bitlines for the read operation, which reduces the area and power overheads of the memory system by eliminating the precharging circuit. The design isolates the storage node from the read path, which improves the read stability. For reliability study, we have investigated the static noise margin (SNM) of the proposed 8T SRAM, for which, we have used two methods – (i) the traditional SNM method with the butterfly curve, (ii) the N-curve method A comparative analysis is performed between the proposed and the existing SRAM designs in terms of area, total power consumption during the read and write operations, and stability and reliability. All these advantages make the proposed 8T SRAM design an ideal candidate for the conventional and computationally intensive applications like machine learning classifier and deep learning neural network. In addition to this, there is need for next generation technologies to design SRAM memory because the conventional CMOS technology is approaching its physical and performance boundaries and as a consequence, becoming incompatible with ultra-low-power applications. Emerging devices such as Tunnel Field Effect Transistor (TFET)) and Graphene Nanoribbon Field Effect Transistor (GNRFET) devices are highly potential candidates to overcome the limitations of MOSFET because of their ability to achieve subthreshold slopes below 60 mV/decade and very low leakage currents [6]-[9]. This research also explores novel TFET and GNRFET based 6T SRAM. The thesis evaluates the standby leakage power in the Tunnel FET (TFET) based 6T SRAM cell for different pull-up, pull-down, and pass-gate transistors ratios (PU: PD: PG) and compared to 10nm FinFET based 6T SRAM designs. It is observed that the 10nm TFET based SRAMs have 107.57%, 163.64%, and 140.44% less standby leakage power compared to the 10nm FinFET based SRAMs when the PU: PD: PG ratios are 1:1:1, 1:5:2 and 2:5:2, respectively. The thesis also presents an analysis of the stability and reliability of sub-10nm TFET based 6T SRAM circuit with a reduced supply voltage of 500mV. The static noise margin (SNM), which is a critical measure of SRAM stability and reliability, is determined for hold, read and write operations of the 6T TFET SRAM cell. The robustness of the optimized TFET based 6T SRAM circuit is also evaluated at different supply voltages. Simulations were done in HSPICE and Cadence tools. From the analysis, it is clear that the main advantage of the TFET based SRAM would be the significant improvement in terms of leakage or standby power consumption. Compared to the FinFET based SRAM the standby leakage power of the T-SRAMs are 107.57%, 163.64%, and 140.44% less for 1:1:1, 1:5:2 and 2:5:2 configurations, respectively. Since leakage/standby power is the primary source of power consumption in the SRAM, and the overall system energy efficiency depends on SRAM power consumption, TFET based SRAM would lead to massive improvement of the energy efficiency of the system. Therefore, T-SRAMs are more suitable for ultra-low power applications. In addition to this, the thesis evaluates the standby leakage power of types of Graphene Nanoribbon FETs based 6T SRAM bitcell and compared to 10nm FinFET based 6T SRAM bitcell. It is observed that the 10nm MOS type GNRFET based SRAMs have 16.43 times less standby leakage power compared to the 10nm FinFET based SRAMs. The double gate SB-GNRFET based SRAM consumes 1.35E+03 times less energy compared to the 10nm FinFET based SRAM during write. However, during read double gate SB-GNRFET based SRAM consume 15 times more energy than FinFET based SRAM. It is also observed that GNRFET based SRAMs are more stable and reliable than FinFET based SRAM.Introduction -- Background -- Novel High Performance Ultra Low Power SRAM Design -- Tunnel FET Based SRAM Design -- Graphene Nanoribbon FET Based SRAM Design -- Double-gate FDSOI Based SRAM Designs -- Novel CNTFET and MEMRISTOR Based Digital Designs -- Conclusio

Multi-criteria optimization for energy-efficient multi-core systems-on-chip

The steady down-scaling of transistor dimensions has made possible the evolutionary progress leading to today’s high-performance multi-GHz microprocessors and core based System-on-Chip (SoC) that offer superior performance, dramatically reduced cost per function, and much-reduced physical size compared to their predecessors. On the negative side, this rapid scaling however also translates to high power densities, higher operating temperatures and reduced reliability making it imperative to address design issues that have cropped up in its wake. In particular, the aggressive physical miniaturization have increased CMOS fault sensitivity to the extent that many reliability constraints pose threat to the device normal operation and accelerate the onset of wearout-based failures. Among various wearout-based failure mechanisms, Negative biased temperature instability (NBTI) has been recognized as the most critical source of device aging. The urge of reliable, low-power circuits is driving the EDA community to develop new design techniques, circuit solutions, algorithms, and software, that can address these critical issues. Unfortunately, this challenge is complicated by the fact that power and reliability are known to be intrinsically conflicting metrics: traditional solutions to improve reliability such as redundancy, increase of voltage levels, and up-sizing of critical devices do contrast with traditional low-power solutions, which rely on compact architectures, scaled supply voltages, and small devices. This dissertation focuses on methodologies to bridge this gap and establishes an important link between low-power solutions and aging effects. More specifically, we proposed new architectural solutions based on power management strategies to enable the design of low-power, aging aware cache memories. Cache memories are one of the most critical components for warranting reliable and timely operation. However, they are also more susceptible to aging effects. Due to symmetric structure of a memory cell, aging occurs regardless of the fact that a cell (or word) is accessed or not. Moreover, aging is a worst-case matric and line with worst-case access pattern determines the aging of the entire cache. In order to stop the aging of a memory cell, it must be put into a proper idle state when a cell (or word) is not accessed which require proper management of the idleness of each atomic unit of power management. We have proposed several reliability management techniques based on the idea of cache partitioning to alleviate NBTI-induced aging and obtain joint energy and lifetime benefits. We introduce graceful degradation mechanism which allows different cache blocks into which a cache is partitioned to age at different rates. This implies that various sub-blocks become unreliable at different times, and the cache keeps functioning with reduced efficiency. We extended the capabilities of this architecture by integrating the concept of reconfigurable caches to maintain the performance of the cache throughout its lifetime. By this strategy, whenever a block becomes unreliable, the remaining cache is reconfigured to work as a smaller size cache with only a marginal degradation of performance. Many mission-critical applications require guaranteed lifetime of their operations and therefore the hardware implementing their functionality. Such constraints are usually enforced by means of various reliability enhancing solutions mostly based on redundancy which are not energy-friendly. In our work, we have proposed a novel cache architecture in which a smart use of cache partitions for redundancy allows us to obtain cache that meet a desired lifetime target with minimal energy consumption

LOW POWER CIRCUITS DESIGN USING RESISTIVE NON-VOLATILE MEMORIES

Ph.DDOCTOR OF PHILOSOPH

Design and Analysis of an Adjacent Multi-bit Error Correcting Code for Nanoscale SRAMs

Increasing static random access memory (SRAM) bitcell density is a major driving force for semiconductor technology scaling. The industry standard 2x reduction in SRAM bitcell area per technology node has lead to a proliferation in memory intensive applications as greater memory system capacity can be realized per unit area. Coupled with this increasing capacity is an increasing SRAM system-level soft error rate (SER). Soft errors, caused by galactic radiation and radioactive chip packaging material corrupt a bitcell’s data-state and are a potential cause of catastrophic system failures. Further, reductions in device geometries, design rules, and sensitive node capacitances increase the probability of multiple adjacent bitcells being upset per particle strike to over 30% of the total SER below the 45 nm process node. Traditionally, these upsets have been addressed using a simple error correction code (ECC) combined with word interleaving. With continued scaling however, errors beyond this setup begin to emerge. Although more powerful ECCs exist, they come at an increased overhead in terms of area and latency. Additionally, interleaving adds complexity to the system and may not always be feasible for the given architecture. In this thesis, a new class of ECC targeted toward adjacent multi-bit upsets (MBU) is proposed and analyzed. These codes present a tradeoff between the currently popular single error correcting-double error detecting (SEC-DED) ECCs used in SRAMs (that are unable to correct MBUs), and the more robust multi-bit ECC schemes used for MBU reliability. The proposed codes are evaluated and compared against other ECCs using a custom test suite and multi-bit error channel model developed in Matlab as well as Verilog hardware description language (HDL) implementations synthesized using Synopsys Design Compiler and a commercial 65 nm bulk CMOS standard cell library. Simulation results show that for the same check-bit overhead as a conventional 64 data-bit SEC-DED code, the proposed scheme provides a corrected-SER approximately equal to the Bose-Chaudhuri- Hocquenghem (BCH) double error correcting (DEC) code, and a 4.38x improvement over the SEC-DED code in the same error channel. While, for 3 additional check-bits (still 3 less than the BCH DEC code), a triple adjacent error correcting version of the proposed code provides a 2.35x improvement in corrected-SER over the BCH DEC code for 90.9% less ECC circuit area and 17.4% less error correction delay. For further verification, a 0.4-1.0 V 75 kb single-cycle SRAM macro protected with a programmable, up-to-3-adjacent-bit-correcting version of the proposed ECC has been fab- ricated in a commercial 28 nm bulk CMOS process. The SRAM macro has undergone neu- tron irradiation testing at the TRIUMF Neutron Irradiation Facility in Vancouver, Canada. Measurements results show a 189x improvement in SER over an unprotected memory with no ECC enabled and a 5x improvement over a traditional single-error-correction (SEC) code at 0.5 V using 1-way interleaving for the same number of check-bits. This is compa- rable with the 4.38x improvement observed in simulation. Measurement results confirm an average active energy of 0.015 fJ/bit at 0.4 V, and average 80 mV reduction in VDDMIN across eight packaged chips by enabling the ECC. Both the SRAM macro and ECC circuit were designed for dynamic voltage and frequency scaling for both nominal and low voltage applications using a full-custom circuit design flow

ENERGY-EFFICIENT FEATURE EXTRACTION ENGINE AND SECURE CHIP IDENTIFICATION FOR UBIQUITOUS SURVEILLANCE

Ph.DDOCTOR OF PHILOSOPH

Gestión de jerarquías de memoria híbridas a nivel de sistema

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadoras y Automática y de Ku Leuven, Arenberg Doctoral School, Faculty of Engineering Science, leída el 11/05/2017.In electronics and computer science, the term ‘memory’ generally refers to devices that are used to store information that we use in various appliances ranging from our PCs to all hand-held devices, smart appliances etc. Primary/main memory is used for storage systems that function at a high speed (i.e. RAM). The primary memory is often associated with addressable semiconductor memory, i.e. integrated circuits consisting of silicon-based transistors, used for example as primary memory but also other purposes in computers and other digital electronic devices. The secondary/auxiliary memory, in comparison provides program and data storage that is slower to access but offers larger capacity. Examples include external hard drives, portable flash drives, CDs, and DVDs. These devices and media must be either plugged in or inserted into a computer in order to be accessed by the system. Since secondary storage technology is not always connected to the computer, it is commonly used for backing up data. The term storage is often used to describe secondary memory. Secondary memory stores a large amount of data at lesser cost per byte than primary memory; this makes secondary storage about two orders of magnitude less expensive than primary storage. There are two main types of semiconductor memory: volatile and nonvolatile. Examples of non-volatile memory are ‘Flash’ memory (sometimes used as secondary, sometimes primary computer memory) and ROM/PROM/EPROM/EEPROM memory (used for firmware such as boot programs). Examples of volatile memory are primary memory (typically dynamic RAM, DRAM), and fast CPU cache memory (typically static RAM, SRAM, which is fast but energy-consuming and offer lower memory capacity per are a unit than DRAM). Non-volatile memory technologies in Si-based electronics date back to the 1990s. Flash memory is widely used in consumer electronic products such as cellphones and music players and NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. The rapid increase of leakage currents in Silicon CMOS transistors with scaling poses a big challenge for the integration of SRAM memories. There is also the case of susceptibility to read/write failure with low power schemes. As a result of this, over the past decade, there has been an extensive pooling of time, resources and effort towards developing emerging memory technologies like Resistive RAM (ReRAM/RRAM), STT-MRAM, Domain Wall Memory and Phase Change Memory(PRAM). Emerging non-volatile memory technologies promise new memories to store more data at less cost than the expensive-to build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. These new memory technologies combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the non-volatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. The research and information on these Non-Volatile Memory (NVM) technologies has matured over the last decade. These NVMs are now being explored thoroughly nowadays as viable replacements for conventional SRAM based memories even for the higher levels of the memory hierarchy. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional(3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years...En el campo de la informática, el término ‘memoria’ se refiere generalmente a dispositivos que son usados para almacenar información que posteriormente será usada en diversos dispositivos, desde computadoras personales (PC), móviles, dispositivos inteligentes, etc. La memoria principal del sistema se utiliza para almacenar los datos e instrucciones de los procesos que se encuentre en ejecución, por lo que se requiere que funcionen a alta velocidad (por ejemplo, DRAM). La memoria principal está implementada habitualmente mediante memorias semiconductoras direccionables, siendo DRAM y SRAM los principales exponentes. Por otro lado, la memoria auxiliar o secundaria proporciona almacenaje(para ficheros, por ejemplo); es más lenta pero ofrece una mayor capacidad. Ejemplos típicos de memoria secundaria son discos duros, memorias flash portables, CDs y DVDs. Debido a que estos dispositivos no necesitan estar conectados a la computadora de forma permanente, son muy utilizados para almacenar copias de seguridad. La memoria secundaria almacena una gran cantidad de datos aun coste menor por bit que la memoria principal, siendo habitualmente dos órdenes de magnitud más barata que la memoria primaria. Existen dos tipos de memorias de tipo semiconductor: volátiles y no volátiles. Ejemplos de memorias no volátiles son las memorias Flash (algunas veces usadas como memoria secundaria y otras veces como memoria principal) y memorias ROM/PROM/EPROM/EEPROM (usadas para firmware como programas de arranque). Ejemplos de memoria volátil son las memorias DRAM (RAM dinámica), actualmente la opción predominante a la hora de implementar la memoria principal, y las memorias SRAM (RAM estática) más rápida y costosa, utilizada para los diferentes niveles de cache. Las tecnologías de memorias no volátiles basadas en electrónica de silicio se remontan a la década de1990. Una variante de memoria de almacenaje por carga denominada como memoria Flash es mundialmente usada en productos electrónicos de consumo como telefonía móvil y reproductores de música mientras NAND Flash solid state disks(SSDs) están progresivamente desplazando a los dispositivos de disco duro como principal unidad de almacenamiento en computadoras portátiles, de escritorio e incluso en centros de datos. En la actualidad, hay varios factores que amenazan la actual predominancia de memorias semiconductoras basadas en cargas (capacitivas). Por un lado, se está alcanzando el límite de integración de las memorias Flash, lo que compromete su escalado en el medio plazo. Por otra parte, el fuerte incremento de las corrientes de fuga de los transistores de silicio CMOS actuales, supone un enorme desafío para la integración de memorias SRAM. Asimismo, estas memorias son cada vez más susceptibles a fallos de lectura/escritura en diseños de bajo consumo. Como resultado de estos problemas, que se agravan con cada nueva generación tecnológica, en los últimos años se han intensificado los esfuerzos para desarrollar nuevas tecnologías que reemplacen o al menos complementen a las actuales. Los transistores de efecto campo eléctrico ferroso (FeFET en sus siglas en inglés) se consideran una de las alternativas más prometedores para sustituir tanto a Flash (por su mayor densidad) como a DRAM (por su mayor velocidad), pero aún está en una fase muy inicial de su desarrollo. Hay otras tecnologías algo más maduras, en el ámbito de las memorias RAM resistivas, entre las que cabe destacar ReRAM (o RRAM), STT-RAM, Domain Wall Memory y Phase Change Memory (PRAM)...Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

Dynamic Power Management of High Performance Network on Chip

With increased density of modern System on Chip(SoC) communication between nodes has become a major problem. Network on Chip is a novel on chip communication paradigm to solve this by using highly scalable and efficient packet switched network. The addition of intelligent networking on the chip adds to the chip’s power consumption thus making management of communication power an interesting and challenging research problem. While VLSI techniques have evolved over time to enable power reduction in the circuit level, the highly dynamic nature of modern large SoC demand more than that. This dissertation explores some innovative dynamic solutions to manage the ever increasing communication power in the post sub-micron era. Today’s highly integrated SoCs require great level of cross layer optimizations to provide maximum efficiency. This dissertation aims at the dynamic power management problem from top. Starting with a system level distribution and management down to microarchitecture enhancements were found necessary to deliver maximum power efficiency. A distributed power budget sharing technique is proposed. To efficiently satisfy the established power budget, a novel flow control and throttling technique is proposed. Finally power efficiency of underlying microarchitecture is explored and novel buffer and link management techniques are developed. All of the proposed techniques yield improvement in power-performance efficiency of the NoC infrastructure

Segurança de computadores por meio de autenticação intrínseca de hardware

Orientadores: Guido Costa Souza de Araújo, Mario Lúcio Côrtes e Diego de Freitas AranhaTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Neste trabalho apresentamos Computer Security by Hardware-Intrinsic Authentication (CSHIA), uma arquitetura de computadores segura para sistemas embarcados que tem como objetivo prover autenticidade e integridade para código e dados. Este trabalho está divido em três fases: Projeto da Arquitetura, sua Implementação, e sua Avaliação de Segurança. Durante a fase de projeto, determinamos como integridade e autenticidade seriam garantidas através do uso de Funções Fisicamente Não Clonáveis (PUFs) e propusemos um algoritmo de extração de chaves criptográficas de memórias cache de processadores. Durante a implementação, flexibilizamos o projeto da arquitetura para fornecer diferentes possibilidades de configurações sem comprometimento da segurança. Então, avaliamos seu desempenho levando em consideração o incremento em área de chip, aumento de consumo de energia e memória adicional para diferentes configurações. Por fim, analisamos a segurança de PUFs e desenvolvemos um novo ataque de canal lateral que circunvê a propriedade de unicidade de PUFs por meio de seus elementos de construçãoAbstract: This work presents Computer Security by Hardware-Intrinsic Authentication (CSHIA), a secure computer architecture for embedded systems that aims at providing authenticity and integrity for code and data. The work encompassed three phases: Design, Implementation, and Security Evaluation. In design, we laid out the basic ideas behind CSHIA, namely, how integrity and authenticity are employed through the use of Physical Unclonable Functions (PUFs), and we proposed an algorithm to extract cryptographic keys from the intrinsic memories of processors. In implementation, we made CSHIA¿s design more flexible, allowing different configurations without compromising security. Then, we evaluated CSHIA¿s performance and overheads, such as area, energy, and memory, for multiple configurations. Finally, we evaluated security of PUFs, which led us to develop a new side-channel-based attack that enabled us to circumvent PUFs¿ uniqueness property through their architectural elementsDoutoradoCiência da ComputaçãoDoutor em Ciência da Computação2015/06829-2; 2016/25532-3147614/2014-7FAPESPCNP

Reliability in the face of variability in nanometer embedded memories

In this thesis, we have investigated the impact of parametric variations on the behaviour of one performance-critical processor structure - embedded memories. As variations manifest as a spread in power and performance, as a first step, we propose a novel modeling methodology that helps evaluate the impact of circuit-level optimizations on architecture-level design choices. Choices made at the design-stage ensure conflicting requirements from higher-levels are decoupled. We then complement such design-time optimizations with a runtime mechanism that takes advantage of adaptive body-biasing to lower power whilst improving performance in the presence of variability. Our proposal uses a novel fully-digital variation tracking hardware using embedded DRAM (eDRAM) cells to monitor run-time changes in cache latency and leakage. A special fine-grain body-bias generator uses the measurements to generate an optimal body-bias that is needed to meet the required yield targets. A novel variation-tolerant and soft-error hardened eDRAM cell is also proposed as an alternate candidate for replacing existing SRAM-based designs in latency critical memory structures. In the ultra low-power domain where reliable operation is limited by the minimum voltage of operation (Vddmin), we analyse the impact of failures on cache functional margin and functional yield. Towards this end, we have developed a fully automated tool (INFORMER) capable of estimating memory-wide metrics such as power, performance and yield accurately and rapidly. Using the developed tool, we then evaluate the #effectiveness of a new class of hybrid techniques in improving cache yield through failure prevention and correction. Having a holistic perspective of memory-wide metrics helps us arrive at design-choices optimized simultaneously for multiple metrics needed for maintaining lifetime requirements