Robust navigation for industrial service robots

Pla de Doctorats Industrials de la Generalitat de CatalunyaRobust, reliable and safe navigation is one of the fundamental problems of robotics. Throughout the present thesis, we tackle the problem of navigation for robotic industrial mobile-bases. We identify its components and analyze their respective challenges in order to address them. The research work presented here ultimately aims at improving the overall quality of the navigation stack of a commercially available industrial mobile-base. To introduce and survey the overall problem we first break down the navigation framework into clearly identified smaller problems. We examine the Simultaneous Localization and Mapping (SLAM) problem, recalling its mathematical grounding and exploring the state of the art. We then review the problem of planning the trajectory of a mobile-base toward a desired goal in the generated environment representation. Finally we investigate and clarify the use of the subset of the Lie theory that is useful in robotics. The first problem tackled is the recognition of place for closing loops in SLAM. Loop closure refers to the ability of a robot to recognize a previously visited location and infer geometrical information between its current and past locations. Using only a 2D laser range finder sensor, we address the problem using a technique borrowed from the field of Natural Language Processing (NLP) which has been successfully applied to image-based place recognition, namely the Bag-of-Words. We further improve the method with two proposals inspired from NLP. Firstly, the comparison of places is strengthened by considering the natural relative order of features in each individual sensor reading. Secondly, topological correspondences between places in a corpus of visited places are established in order to promote together instances that are ‘close’ to one another. We then tackle the problem of motion model calibration for odometry estimation. Given a mobile-base embedding an exteroceptive sensor able to observe ego-motion, we propose a novel formulation for estimating the intrinsic parameters of an odometry motion model. Resorting to an adaptation of the pre-integration theory initially developed for inertial motion sensors, we employ iterative nonlinear on-manifold optimization to estimate the wheel radii and wheel separation. The method is further extended to jointly estimate both the intrinsic parameters of the odometry model together with the extrinsic parameters of the embedded sensor. The method is shown to accommodate to variation in model parameters quickly when the vehicle is subject to physical changes during operation. Following the generation of a map in which the robot is localized, we address the problem of estimating trajectories for motion planning. We devise a new method for estimating a sequence of robot poses forming a smooth trajectory. Regardless of the Lie group considered, the trajectory is seen as a collection of states lying on a spline with non-vanishing n-th derivatives at each point. Formulated as a multi-objective nonlinear optimization problem, it allows for the addition of cost functions such as velocity and acceleration limits, collision avoidance and more. The proposed method is evaluated for two different motion planning tasks, the planning of trajectories for a mobile-base evolving in the SE(2) manifold, and the planning of the motion of a multi-link robotic arm whose end-effector evolves in the SE(3) manifold. From our study of Lie theory, we developed a new, ready to use, programming library called `manif’. The library is open source, publicly available and is developed following good software programming practices. It is designed so that it is easy to integrate and manipulate, and allows for flexible use while facilitating the possibility to extend it beyond the already implemented Lie groups.La navegación autónoma es uno de los problemas fundamentales de la robótica, y sus diferentes desafíos se han estudiado durante décadas. El desarrollo de métodos de navegación robusta, confiable y segura es un factor clave para la creación de funcionalidades de nivel superior en robots diseñados para operar en entornos con humanos. A lo largo de la presente tesis, abordamos el problema de navegación para bases robóticas móviles industriales; identificamos los elementos de un sistema de navegación; y analizamos y tratamos sus desafíos. El trabajo de investigación presentado aquí tiene como último objetivo mejorar la calidad general del sistema completo de navegación de una base móvil industrial disponible comercialmente. Para estudiar el problema de navegación, primero lo desglosamos en problemas menores claramente identificados. Examinamos el subproblema de mapeo del entorno y localización del robot simultáneamente (SLAM por sus siglas en ingles) y estudiamos el estado del arte del mismo. Al hacerlo, recordamos y detallamos la base matemática del problema de SLAM. Luego revisamos el subproblema de planificación de trayectorias hacia una meta deseada en la representación del entorno generada. Además, como una herramienta para las soluciones que se presentarán más adelante en el desarrollo de la tesis, investigamos y aclaramos el uso de teoría de Lie, centrándonos en el subconjunto de la teoría que es útil para la estimación de estados en robótica. Como primer elemento identificado para mejoras, abordamos el problema de reconocimiento de lugares para cerrar lazos en SLAM. El cierre de lazos se refiere a la capacidad de un robot para reconocer una ubicación visitada previamente e inferí información geométrica entre la ubicación actual del robot y aquellas reconocidas. Usando solo un sensor láser 2D, la tarea es desafiante ya que la percepción del entorno que proporciona el sensor es escasa y limitada. Abordamos el problema utilizando 'bolsas de palabras', una técnica prestada del campo de procesamiento del lenguaje natural (NLP) que se ha aplicado con éxito anteriormente al reconocimiento de lugares basado en imágenes. Nuestro método incluye dos nuevas propuestas inspiradas también en NLP. Primero, la comparación entre lugares candidatos se fortalece teniendo en cuenta el orden relativo natural de las características en cada lectura individual del sensor; y segundo, se establece un corpus de lugares visitados para promover juntos instancias que están "cerca" la una de la otra desde un punto de vista topológico. Evaluamos nuestras propuestas por separado y conjuntamente en varios conjuntos de datos, con y sin ruido, demostrando mejora en la detección de cierres de lazo para sensores láser 2D, con respecto al estado del arte. Luego abordamos el problema de la calibración del modelo de movimiento para la estimación de la edometría. Dado que nuestra base móvil incluye un sensor exteroceptivo capaz de observar el movimiento de la plataforma, proponemos una nueva formulación que permite estimar los parámetros intrínsecos del modelo cinemático de la plataforma durante el cómputo de la edometría del vehículo. Hemos recurrido a una adaptación de la teoría de reintegración inicialmente desarrollado para unidades inerciales de medida, y aplicado la técnica a nuestro modelo cinemático. El método nos permite, mediante optimización iterativa no lineal, la estimación del valor del radio de las ruedas de forma independiente y de la separación entre las mismas. El método se amplía posteriormente par idéntica de forma simultánea, estos parámetros intrínsecos junto con los parámetros extrínsecos que ubican el sensor láser con respecto al sistema de referencia de la base móvil. El método se valida en simulación y en un entorno real y se muestra que converge hacia los verdaderos valores de los parámetros. El método permite la adaptación de los parámetros intrínsecos del modelo cinemático de la plataforma derivados de cambios físicos durante la operación, tales como el impacto que el cambio de carga sobre la plataforma tiene sobre el diámetro de las ruedas. Como tercer subproblema de navegación, abordamos el reto de planificar trayectorias de movimiento de forma suave. Desarrollamos un método para planificar la trayectoria como una secuencia de configuraciones sobre una spline con n-ésimas derivadas en todos los puntos, independientemente del grupo de Lie considerado. Al ser formulado como un problema de optimización no lineal con múltiples objetivos, es posible agregar funciones de coste al problema de optimización que permitan añadir límites de velocidad o aceleración, evasión de colisiones, etc. El método propuesto es evaluado en dos tareas de planificación de movimiento diferentes, la planificación de trayectorias para una base móvil que evoluciona en la variedad SE(2), y la planificación del movimiento de un brazo robótico cuyo efector final evoluciona en la variedad SE(3). Además, cada tarea se evalúa en escenarios con complejidad de forma incremental, y se muestra un rendimiento comparable o mejor que el estado del arte mientras produce resultados más consistentes. Desde nuestro estudio de la teoría de Lie, desarrollamos una nueva biblioteca de programación llamada “manif”. La biblioteca es de código abierto, está disponible públicamente y se desarrolla siguiendo las buenas prácticas de programación de software. Esta diseñado para que sea fácil de integrar y manipular, y permite flexibilidad de uso mientras se facilita la posibilidad de extenderla más allá de los grupos de Lie inicialmente implementados. Además, la biblioteca se muestra eficiente en comparación con otras soluciones existentes. Por fin, llegamos a la conclusión del estudio de doctorado. Examinamos el trabajo de investigación y trazamos líneas para futuras investigaciones. También echamos un vistazo en los últimos años y compartimos una visión personal y experiencia del desarrollo de un doctorado industrial.Postprint (published version

Teak: A Novel Computational And Gui Software Pipeline For Reconstructing Biological Networks, Detecting Activated Biological Subnetworks, And Querying Biological Networks.

As high-throughput gene expression data becomes cheaper and cheaper, researchers are faced with a deluge of data from which biological insights need to be extracted and mined since the rate of data accumulation far exceeds the rate of data analysis. There is a need for computational frameworks to bridge the gap and assist researchers in their tasks. The Topology Enrichment Analysis frameworK (TEAK) is an open source GUI and software pipeline that seeks to be one of many tools that fills in this gap and consists of three major modules. The first module, the Gene Set Cultural Algorithm, de novo infers biological networks from gene sets using the KEGG pathways as prior knowledge. The second and third modules query against the KEGG pathways using molecular profiling data and query graphs, respectively. In particular, the second module, also called TEAK, is a network partitioning module that partitions the KEGG pathways into both linear and nonlinear subpathways. In conjunction with molecular profiling data, the subpathways are ranked and displayed to the user within the TEAK GUI. Using a public microarray yeast data set, previously unreported fitness defects for dpl1 delta and lag1 delta mutants under conditions of nitrogen limitation were found using TEAK. Finally, the third module, the Query Structure Enrichment Analysis framework, is a network query module that allows researchers to query their biological hypotheses in the form of Directed Acyclic Graphs against the KEGG pathways

Visual Perception For Robotic Spatial Understanding

Humans understand the world through vision without much effort. We perceive the structure, objects, and people in the environment and pay little direct attention to most of it, until it becomes useful. Intelligent systems, especially mobile robots, have no such biologically engineered vision mechanism to take for granted. In contrast, we must devise algorithmic methods of taking raw sensor data and converting it to something useful very quickly. Vision is such a necessary part of building a robot or any intelligent system that is meant to interact with the world that it is somewhat surprising we don\u27t have off-the-shelf libraries for this capability. Why is this? The simple answer is that the problem is extremely difficult. There has been progress, but the current state of the art is impressive and depressing at the same time. We now have neural networks that can recognize many objects in 2D images, in some cases performing better than a human. Some algorithms can also provide bounding boxes or pixel-level masks to localize the object. We have visual odometry and mapping algorithms that can build reasonably detailed maps over long distances with the right hardware and conditions. On the other hand, we have robots with many sensors and no efficient way to compute their relative extrinsic poses for integrating the data in a single frame. The same networks that produce good object segmentations and labels in a controlled benchmark still miss obvious objects in the real world and have no mechanism for learning on the fly while the robot is exploring. Finally, while we can detect pose for very specific objects, we don\u27t yet have a mechanism that detects pose that generalizes well over categories or that can describe new objects efficiently. We contribute algorithms in four of the areas mentioned above. First, we describe a practical and effective system for calibrating many sensors on a robot with up to 3 different modalities. Second, we present our approach to visual odometry and mapping that exploits the unique capabilities of RGB-D sensors to efficiently build detailed representations of an environment. Third, we describe a 3-D over-segmentation technique that utilizes the models and ego-motion output in the previous step to generate temporally consistent segmentations with camera motion. Finally, we develop a synthesized dataset of chair objects with part labels and investigate the influence of parts on RGB-D based object pose recognition using a novel network architecture we call PartNet

The design and analysis of boundary data structures

The thesis is concerned with the efficient interrogation of CAD data. CAD data finds use in diverse range of applications which necessitates extension and integration of the CAD data base. By an exhaustive categorization of such application requirements and analysis of various CAD techniques, it is shown that boundary data structures are the most suitable in CAD, CAM and advanced robotic applications. Several boundary data structures have been proposed since the classic Winged edge data structure, these aimed at reducing the storage requirement and increasing information retrieval speeds. In this thesis methodologies are developed which enable us to discover compact and fast access time schemes and analyze and fine tune for individual applications. We demonstrate how the application of the optimality concepts can lead us to the discovery of more efficient data structures than popular data structures. All the boundary data structures proposed to date have been based on the underlying assumption that all the data resides in main memory. We show that in an integrated CAD environment (characterized by virtual a memory environment or a data base environment), these data structures are inefficient in both storage and time. We propose a new data structure shaped like A which is the most compact as well as more efficient in access time, under certain conditions of real memory and virtual memory. Experiments reveal a paradoxical phenomenon: access time increases with storage, violating the classic law of storage vs. time. Recently non-manifold boundary geometric modeling has become popular to meet the growing needs such as uniform treatment of wire frame, surface and solid modeling and design by features. We introduce a uniform terminology and notation to distinguish and critically analyze several non-manifold boundary data structures. It is hoped to fulfill the need for a ready reference for the design of efficient boundary data structures. The other aspects dealt with are the validity and conversion of Boundary data structures. To verify the concepts developed, in practice, a whole suite of fast algorithms have been implemented for model manipulation, visualization and data conversion