Laboratory Experiments on 5G Cellular Technologies - A Case Study on the Synergy of Research and Experiential Learning

Teaching and research complement each other. This is an advice often given to young professors, to encourage them to find synergy between research and teaching, i.e., to let research aid teaching, and vice-versa. When a professor develops new laboratory experiments for undergraduate courses in wireless communications, he/she may find it difficult to replicate research experiments, because they require expensive equipment, usually available in “research, non-teaching” laboratories. In this paper, we present a wireless laboratory that is used for both research and teaching. We show how the research on fifth generation (5G) cellular networks - including millimeter wave transmission, ultra-wideband wireless communications, and multiple-input-single-output (MISO) antennas – helped develop laboratory experiments for undergraduate engineering students. The experiments not only teach students about 5G technologies, but also how to use real-time spectrum analyzers, vector signal generators, arbitrary waveform generators, and signal analyzers, which will help their engineering and/or research careers.Cockrell School of Engineerin

Mathematical modeling of ultra wideband in vivo radio channel

This paper proposes a novel mathematical model for an in vivo radio channel at ultra-wideband frequencies (3.1–10.6 GHz), which can be used as a reference model for in vivo channel response without performing intensive experiments or simulations. The statistics of error prediction between experimental and proposed model is RMSE = 5.29, which show the high accuracy of the proposed model. Also, the proposed model was applied to the blind data, and the statistics of error prediction is RMSE = 7.76, which also shows a reasonable accuracy of the model. This model will save the time and cost on simulations and experiments, and will help in designing an accurate link budget calculation for a future enhanced system for ultra-wideband body-centric wireless systems

Wi-PoS : a low-cost, open source ultra-wideband (UWB) hardware platform with long range sub-GHz backbone

Ultra-wideband (UWB) localization is one of the most promising approaches for indoor localization due to its accurate positioning capabilities, immunity against multipath fading, and excellent resilience against narrowband interference. However, UWB researchers are currently limited by the small amount of feasible open source hardware that is publicly available. We developed a new open source hardware platform, Wi-PoS, for precise UWB localization based on Decawave’s DW1000 UWB transceiver with several unique features: support of both long-range sub-GHz and 2.4 GHz back-end communication between nodes, flexible interfacing with external UWB antennas, and an easy implementation of the MAC layer with the Time-Annotated Instruction Set Computer (TAISC) framework. Both hardware and software are open source and all parameters of the UWB ranging can be adjusted, calibrated, and analyzed. This paper explains the main specifications of the hardware platform, illustrates design decisions, and evaluates the performance of the board in terms of range, accuracy, and energy consumption. The accuracy of the ranging system was below 10 cm in an indoor lab environment at distances up to 5 m, and accuracy smaller than 5 cm was obtained at 50 and 75 m in an outdoor environment. A theoretical model was derived for predicting the path loss and the influence of the most important ground reflection. At the same time, the average energy consumption of the hardware was very low with only 81 mA for a tag node and 63 mA for the active anchor nodes, permitting the system to run for several days on a mobile battery pack and allowing easy and fast deployment on sites without an accessible power supply or backbone network. The UWB hardware platform demonstrated flexibility, easy installation, and low power consumption

Joint distribution of polarization-multiplexed UWB and WiMAX radio in PON

In this paper, the feasibility of the joint distribution of ultra-wideband (UWB) and WIMAX wireless using polarization multiplexing as a coexistence technique is proposed and experimentally demonstrated within the framework of passive optical networks (PON). Four single- and orthogonal-polarization multiplexing schemes are studied targeting to reduce the mutual interference when UWB and WiMAX are distributed jointly through standard single-mode fiber (SSMF) without transmission impairments compensation techniques and amplification. Experimental results indicate successful transmission up to 25 km, in SSMF exceeding the range in typical PON deployments. The radio link penalty introduced by optical transmission is also investigated in this paper

D-SLATS: Distributed Simultaneous Localization and Time Synchronization

Through the last decade, we have witnessed a surge of Internet of Things (IoT) devices, and with that a greater need to choreograph their actions across both time and space. Although these two problems, namely time synchronization and localization, share many aspects in common, they are traditionally treated separately or combined on centralized approaches that results in an ineffcient use of resources, or in solutions that are not scalable in terms of the number of IoT devices. Therefore, we propose D-SLATS, a framework comprised of three different and independent algorithms to jointly solve time synchronization and localization problems in a distributed fashion. The First two algorithms are based mainly on the distributed Extended Kalman Filter (EKF) whereas the third one uses optimization techniques. No fusion center is required, and the devices only communicate with their neighbors. The proposed methods are evaluated on custom Ultra-Wideband communication Testbed and a quadrotor, representing a network of both static and mobile nodes. Our algorithms achieve up to three microseconds time synchronization accuracy and 30 cm localization error

Wall Compensation for Ultra Wideband Applications

Due to their low frequency contents, ultra wideband (UWB) signals have the ability to penetrate walls and obstacles. As the signal propagates through these obstacles, it gets attenuated, slows down, and gets dispersed. This paper demonstrates wall compensation for through-wall imaging, localization and communication receiver design purposes by first characterizing wave propagation through various building materials in the UWB frequency range. Knowledge of the walls obtained from the wall characterization is used to estimate and correct the position accuracy of a target object located behind the walls using three proposed methods namely; constant amplitude and delay (CDL), frequency dependent data (FFD), and data fitting methods (FIT). The obtained results indicated relatively acceptable measure of wall compensation for the three methods. Results from such work provide insight on how to develop algorithms for effective target position estimation in imaging and localization applications. They are also useful for channel modelling and link budget analysis